ENIGMA 2 for ipbox HD 0.1.0 beta

[otheitis]

How to for the e2 in usb stick!!

 

[StanMT]

pendrive partitioned for 512mb and formated ext2 on linux

tar file extracted from linux directly to usb stick....

still won't boot

result:

U-Boot 1.3.1 (Sep 5 2008 - 14:18:50) - stm23-2008-03-19
Board: cuberevo-mini (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

** Unable to read "boot/uImage" from usb 0:1 **
## Booting image at a5ff0000 ...
Bad Magic Number
cuberevo-mini>


ideas???

 

[xxxAxxx]

and after you see a Panic yes???you cant boot as it is... use this img http://www.sat-universe.com/showthread.php?t=98444

 

[dorosk]

Does this version work if we have two tuners installed.
In my case I have DVB-S2 & DVB-C.
It will ignore the second one or it will stay on booting?

For your information I have installed it the way OTHEITIS suggests, the buttons work and I can select the Sif image when I press 2 and try to boot Enigma when I press the 1 button. The files look OK on the USB stick.
Unfortunately it stays in booting for a long time, it tried to change to loading momentarily and then went back to booting.

 

[tom_63]

pendrive partitioned for 512mb and formated ext2 on linux

tar file extracted from linux directly to usb stick....

still won't boot

result:

U-Boot 1.3.1 (Sep 5 2008 - 14:18:50) - stm23-2008-03-19
Board: cuberevo-mini (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

** Unable to read "boot/uImage" from usb 0:1 **
## Booting image at a5ff0000 ...
Bad Magic Number
cuberevo-mini>


ideas???

in my opinion there are 2 possible causes:

1.) maybe the files aren´t correctly coped to the stick. Did you a "sync; sync;" after copying?
2.) maybe the bootargs don´t have the correct boot-device. If yout formated the stick with an NLB-Image there may be a swap-partition on the stick. The correct boot-device would be /dev/sda2 or /dev/sdb2 then.

Greetz TOM

 

[k2k2000]

## Booting image at a5ff0000 ...
Bad Magic Number

maybe usb sticker unmounted correctly
try
#umount /dev/sda1
after extracting e2 tar file