Dragom cam version 3.1

[shogunmaster]

Hi guys, I have a dragon cam 3.1, fun7 card and dynamite programmer. Can anyone tell me what software I need to make the files for the loader card for my cam version. I am hoping to extract keys from posts and create files for my cam version but need step by step guide. Thanks

 

[empb]

Predator380F should load on this CAM.

Plenty of Predator380F's are already on the site and you can edit the file with Dragoncrypt v Penta v1.16 or PredEdit.

Only Dragon CAM v2.06 or older (lower numbers) require old firmware (ie Predator325 for N2 [eg TV Globo] or 360).

 

[shogunmaster]

dragonload

Thanks for that empb.....any tips on getting dragonload to talk to com1. I have tried both phoenix mode and smartmouse at 6mhz but wont talk.

 

[empb]

I use CAS Interface and CAS Studio Software, but if I remember this works for Phoenix programmers:

http://www.sat-universe.com/showpost.php?p=150437&postcount=10

 

[shogunmaster]

Cas Studio

I have finally cracked it!!. I was trying to use third party software with the phoenix side of the programmer and RS232 cable. I didn't need to and realised I could use the Dragon Load in the studio software via the USB lead. Next stop...editing keys. Question...can the old un-powered version of the season card be used for key capture or should I buy a powered version and do I use Fausto to do this?.:thum:

 

[empb]

I am hoping to extract keys from posts and create files for my cam version but need step by step guide. Thanks

So keys are here: http://www.sat-universe.com/forumdisplay.php?f=162

And Dragoncrypt v Penta v1.16 (and PredEdit) as mentioned earlier are here: http://www.sat-universe.com/showpost.php?p=92870&postcount=5

Question...can the old un-powered version of the season card be used for key capture or should I buy a powered version and do I use Fausto to do this?.:thum:

You will only get Control Word Keys (which unless in Fixed [also known as "Constant" or "Static"] Control Word mode change every 10 or so seconds, I use unpowered version for this (taking power from PC thru its RS232 connection).

If you are hoping to log and extact keys you should read snakie's posts here (and elsewhere on forums): http://www.sat-universe.com/showthread.php?p=1000392#post1000392