Hi ,
im trying to flash a dm600pvr and since i have no serial connector i used the method of typing the following commands over telnet :
mount /boot -o remount,rw
rm /boot/*
reboot
When restarted the box i went to the firmware upgrade page on the web interface and choose the nfi image (gemini 4.70). When i press the flash button after 10 seconds the browser says "page cannot be displayed" and points me to download the flash (192.168.200.3/FLASH)
Any ways to overcome this?? im stuck here!!
Thanks
im trying to flash a dm600pvr and since i have no serial connector i used the method of typing the following commands over telnet :
mount /boot -o remount,rw
rm /boot/*
reboot
When restarted the box i went to the firmware upgrade page on the web interface and choose the nfi image (gemini 4.70). When i press the flash button after 10 seconds the browser says "page cannot be displayed" and points me to download the flash (192.168.200.3/FLASH)
Any ways to overcome this?? im stuck here!!
Thanks