Dead (Mini-usb) service port

[Momba0]

Hi, Ive had my DM800se clone for some years now but ran into a problem with no ca found. When I attempted to flash thru the service port I found that the usb-mini-B had come off its contacts. After reconnecting it, Windows could not recognize the device. With several tries at putting a new mini-B in, I get the same indications and sometimes nothing at all.

Is there any other way to flash a image without going thru the service port, or is my box now worthless?

Any advice would be greatly appreciated, thanks.

 

[BM300]

It looks that your other alternative is the old way of using the RS232 and LAN with Dreamup​

 

[toysoft]

Try the JapharFlasher, but you will still need to use the Service Port and Rj45,...

Which image did you loaded into the box ? Which Sim was it based ? As the temporary solution would be to get a sim compatible with the image loaded and then flash back the SSL/Image for your sim and put it back.

TS

 

[Momba0]

DM800se HD has no rs232 port
And the problem is not in the load but in the sevice port itself.
I will just have to find someone who is very good in circuit board repair to attach the usb-mini-B to the proper contacts so that it is recognized by my pc.
Thanks just the same.