Backup DM800se Problem

[valentino50]

I have tried to flash my DM800se clone with this:

http://www.sat-universe.com/showthread.php?t=217360&page=12
OpenPLi-4-Dm800se-sim2-ssl84d-Bkup_by Inspiral..posted by Ferret.
I got this message( too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)..
I have never had any problem flashing with other images such as newnigma2 or else ..I don't know if its due to the image size of 68.5mb where as the newnigma2 iam using just now is only 49.2mb.
can someone pls clear this thanks in advance

 

[Tampo]

I have tried to flash my DM800se clone with this:

http://www.sat-universe.com/showthread.php?t=217360&page=12
OpenPLi-4-Dm800se-sim2-ssl84d-Bkup_by Inspiral..posted by Ferret.
I got this message( too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)..
I have never had any problem flashing with other images such as newnigma2 or else ..I don't know if its due to the image size of 68.5mb where as the newnigma2 iam using just now is only 49.2mb.
can someone pls clear this thanks in advance

Hopefully the same
Before the flash, you should go to telnet
Flash Sector Recovery [enable]

exit when only select Save Settings

 

[valentino50]

Hi mate thanks for your response unfortunately I don't know how to get to this setting on your pictures you've posted I don't even know how or what to start with?
Baring in mind I have got DM800se CLONE not original

 

[Tampo]

Hi mate thanks for your response unfortunately I don't know how to get to this setting on your pictures you've posted I don't even know how or what to start with?
Baring in mind I have got DM800se CLONE not original

go to

type in the ip box

 

[Ferret]

Having looked into this it was a image problem, just reflash with a different image.

 

[Bluesweeper]

How do you get to the DREAMBOX ADVANCED SETUP UTILITY ?

 

[valentino50]

Having looked into this it was a image problem, just reflash with a different image.

Thanks Ferret,it's definitely the image problem mate