Search results

Viark's and the like don't like diseqc switches with unicable. Shouldn't be so much of an issue with an enigma2 box, that said however i've not actually tried using Unicable via a diseqc switch with an E2 box.

It seems rushed, which is weird as they have had since October to sort things.

EPG Pro won't load if you restore a 1.07 or earlier channel list, instead it will initialize the box. If you restore a channel list, it doesn't seem to add any new transponders, so if there are new ones found with a network or blindscan, then it won't scan them. If you create a new clean...

Server is 1.45 on 1.09 Seems 1.09 has more bugs than 1.07 though

it's no longer avaliable on app store

It will depend on if your sat meter supports unicable

Sometime between now and September is my guess

Keep in mind that every splitter will reduce the signal a little. Mine is only in a daisy chain like that, as i've added extra splitters along the way and couldn't be bothered to pull it all apart and redo it (far too many wires behind my units). But if I was to do it clean now, I would...

I got mine from the uk rain forest site, but seems it's out of stock now. For splitters, currently I am using 2x 8 way, and 2x 6 way in a daisy chain, different brands I think some are Antiference and some are SAC. Lnb out - 8 way splitter - 7 tuners + 1 8 way splitter to 7 tuner + 1 6 way...

1.19 update wipes the box, so backup channels first

Doesn't hurt to play 🤣🤣🤣

It's the reason I am using Unicable II, I have 35+ E2 boxes + Viark, Gtmedia, Qviart Dual and Icone Wegoo. The Dual when I first got it did not like Unicable II at all (it is much better with it now) and due to the configuration I had, it was hard work to get a feed to all boxes for both...

Not that I have seen, only Unicable I. If you want Unicable II with 3 Legacy, then I use the Dur-line UK 124-3L, which has 24 Unicable II and 3 Legacy. It out performs my old Inverto IDLU-32UL40-UNBOO-OPP

Both, we had a short test early last year as F1 UHD was being tested before it was added as a full time channel, during this period it was not HW paired, and only need icam to open it, but the Sat 4K couldn't handle a Stream Relay 4K channel. Also they would need the AES K1 key from a Q box to...

Never say never, but unlikely to happen on the Viark Sat 4K for the UK / DE / IT versions.

Power off at the back, then power on again, as soon as you see boot on the display, keep pressing ok button. It should boot into recovery menu, then you can pick which slot to boot. Alternatively, keep pressing buttons 1,2,3 or 4 to boot slots 1-4 or 0 if you want to boot Android.

Rescan 12110 H 27500 2/3

I bet you have retuned your viark, deleted everything and now have MUTV scanned in 8000+ times and it still won't open.

This is @barney115 you are talking about. If it's down for more than 15 mins, it's gone for good :p

A work around for that, is to go into the system settings and turn on Auto Channel Selection, this turns off the Auto Channel Exit option, but means when you highlight a channel in the list it auto zaps to the channel and updates the infobar with correct channel name, so it is then always correct.