is there a option to input the key on the pro boxes or how does it work if there not tied to broadcasters.
Azbox Premium + only does mpg2 not modern mpg4 feeds.Picture 4:2:2 : QUALI TV QS1080IR : DVB-S MPEG-2 (December 2004) , AZBOX Premium (+) Elite DVB-S MPEG-2 , DVB-S2 MPEG-2 (January 2009) , GT MEDIA Combo (July 2021) DVB-S MPEG-2/MPEG-4 , DVB-S2 MPEG-2/MPEG-4 .
You can insert the keys also using the receiver front panel, not only from its web interface.Aye, easy to input the key into an Ericsson RX8200, done by a browser interface menu screen.
These receivers are not generally tied to a broadcaster, they are like a SIM free phone, buy one, stick a CW into it and use it.
You can insert the keys also using the receiver front panel, not only from its web interface.
It is a very simple operation. When yyou have the key, switch on the receiver, tune the right frequency, enter the key and go!
No streaming, no PCs, no additional cards, no advanced skills needed.
But.... yes, expensive.
Yes, right, it could be all true. But my analysis was against streaming from an enigma2 receiver into a PC. In this case, RX8200 usage could be easier.That is not accurate, you are making it sound as though an RX8200 is an easy unit to operate. It is not a simple unit to operate for a newbie.
You failed to mention:
1. There is no remote control handset.
2. There are no on screen menus on the TV.
3. The polarity voltage has to be manually set at 13V or 18V.
4. The L.O. has to be manually set depending if the precise frequency you wish to tune is high or low band.
For most users there is a learning curve to be able to operate one of these units quickly and efficiently.
Add in the fact that the noise coming from it sounds like a jet taking off and it is not a receiver for a home office or a living area.
It needs to be out of the room where viewing is to take place.
Do you think it works also with Dreambox DM920 or only with Vu+ receivers?If your decoder is Enigma&Appletv :
1.Install and configure VuplusTv(appletv)
2.Scan the desired satellite and save to Favorites or however you have saved your channel list.
3. In the VuplusTv application it should show you the channels you have scanned and just select and watch TV!
vplustv-422
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.www.mediafire.com
Any receiver that can send a stream (4:2:2 decoding is done by the client, not the server)Do you think it works also with Dreambox DM920 or only with Vu+ receivers?
This android uses the same SW as GT (4:2:2 SW decoding)Just this afternoon I was doing tests with someone who has an ECHOLINK V9 OCTA and played 4:2:2 without problem. It didn’t last long, so I can’t say how long it would last in continuous operation.
i had it working with a old e2 Zgemma.Do you think it works also with Dreambox DM920 or only with Vu+ receivers?
Same for me, 10m cable from MediaMarkt, glad to say faultless for over 10 years...............
but i just use my tbs card for 422 and long hdmi lead from pc to tv lovely bubbly
Tested. Very useful app! And so simple to configure and use.If your decoder is Enigma&Appletv :
1.Install and configure VuplusTv(appletv)
2.Scan the desired satellite and save to Favorites or however you have saved your channel list.
3. In the VuplusTv application it should show you the channels you have scanned and just select and watch TV!
vplustv-422
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.www.mediafire.com