Recent content by jenseneverest

Why write in BOLD ? Are those TP's currently active ?

What mode are these transmitted in ? Is it possible to find out ?? Mode 0 would be lovely, but clearly its not that.......

thats him.....been here before......so im out, good luck to anyone else.

Thats for a fixed dish setup....if your struggling with that, then get a professional to help.

Ebay for 25 quid......there is a 1.9 CM (i think that should be 1.8m) on there now....... but the wife will leave :unsure:

@Gunnner2023 Those mounts on SSS are complete overkill, i have the original CM mount on my 1.2 and it must be 25 years old with very little to no play in it at all. The phosphor bronze bushes just need some engine oil pressing through then every 2/3 years - normally when i service the ram i do...

Rubbish, they have open software made by hobbyist's for hobbyist's. Every part of out e2 machines is open bar the dvb drivers. If you want a locked down, idiot proof box, get one from a TV provider like sky.

Sad as it is.... the cat was let out the bag many years ago. So as far as Biss goes, the writing is already on the wall. More and more satellite TV is being replaced by IPTV (i mean the legal kind here) Hopefully that will mean most providers don't bother with Biss2, in the knowledge that all...

This is from my notes (probably posted somewhere from EnoSat ) lamedb f:5 wrong parameter,right f:4 ?? lamedb parameters: f:1 - noSDT // does not get from the SDT, but checks the SID in the PAT f:2 - noShow // hides the channel f:4 - noDVB // no PMT is used, only stored PIDs f:8 - holdName //...

Well this is not 27.5w.....Have you tried scanning them ? As i posted above........there is no video, audio, PCR, PMT or TXT pids on all of the channels. Last week channels were up, then all of the channels went off air, then they came back, today the PID's went......tomorrow they may be gone...

Still there, its the missing PID's as i posted above.

With enigma2 devices few days ago some of the channels had the required PID's, i was able to edit the key file accordingly and got most working. on a scan today there is no video, audio, PCR, PMT, TXT pids on all the channels..... So now the question is how do we go about finding the correct...

its all gone now - i had it easily just with an e2 blind scan, but now it is no longer transmitting on 15w.

36 east 11174 V 3599 DAKARASS2

Thanks for the reply guys, i have picked up 3 TP's this morning and a couple of channels The dakar rally 2024 feed 2 is currently coming in at 9.6db !! ( but now a test screen) Im using the very old twin dvbs2 tuner on a VU ultimo4k, as that tuner can blind scan ( tuner without dvbs2x...