Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide Experimental Receiver
- Thread starter Ferret
- Start date
asaphus
Registered
- Messages
- 81
I had bought one of these remotes a while back from China. Just tested with qviart and it works with it. Doesn't have epg, info and pvr buttons though. It's called"
Q2 Smart TV Backlight Remote Control IR Learning 2.4GHz RF Wireless Remote Controller for Computer Android TV Box Backlit Edition"
. I bought it for 5 quid back then.
Ok so i have send this box back as the seller and he has recived box bout 2 week ago. Seller did asked me if i send it back he will refund full amount (i got full amount of the box thruogh paypal) of the box and after chek the foult he will also refund me the p&p . And after 2 days his got the box i have emailed him to say now you got the box and you see the remote not working can you refund my p&p as you promised. No replay to email and i did another email after 2 day from first email and guess what not reply that eader. So just warning you all do not buy anything from this guy . i cant give his shops full web address (agains the forum rulls) but beggins with ac-sat... to @admins if this post agains your rules morethan wellcome to delete it thanks.
- Messages
- 898
Thanks for the information.. Sure it should be ok.
tamicia
Registered
- Messages
- 46
you can find it on e*ay
manic01
Super VIP
- Messages
- 2,551
Good advice mate
- Messages
- 17,534
Anyone considering installing 1.09 its rubbish you have been warned. Not fit for release in my opinion.
Stick with 1.07 until Qivart actually start to fix issues people who test the beta firmwares report to them.
Of course if you must install 1.09 report all its issues here maybe Qivart will take noticed.
My Dual is back in its box im done with it.
Anyone considering the Dual don't, buy a Sat 4K and a Octagon sf8008 2 boxes yes but both work as they should.
Stick with 1.07 until Qivart actually start to fix issues people who test the beta firmwares report to them.
Of course if you must install 1.09 report all its issues here maybe Qivart will take noticed.
My Dual is back in its box im done with it.
Anyone considering the Dual don't, buy a Sat 4K and a Octagon sf8008 2 boxes yes but both work as they should.
so my friend there is no good installing the 1.09 we should stay with 1.07 .am i right .
- Messages
- 17,534
Only improvement is server 1.45 but there is nothing new on that server and 1.09 has more bugs than 1.07
Try it you can always go back to 1.07 for now.
doctor no
Registered
- Messages
- 70
I found a positive reply in foroKeys forum they say tested and everything is ok and another user say its perfect.
Please report your reviews and the bugs you found .
Thanks.
- Messages
- 17,534
Old bugs reported in April 23 still not fixed
None existent PVR is not good on any Satellite Box and its been that way since first release.
Box locks scanning a lot of sat position and its been that way since 1.04. . Try scan 4.9e
Will not record Icam Stream relay channel from the timer.
EPG Pro now and Next only 28e.
None of the above looked at in 12 months
HDR is turned off in 109 unless you use channel list from 1.07
Blind scan finds new transponder but does not always add all of them to the database and looses some on reboot.
Database does not carry all TP's so it misses channels on the majority of sat positions.
Moving or swapping channels about not working.
On E2 side i found images backed up from any other slots other than slot 1 will flash not always boot.
There's more ive forgotten about. Far from perfect. Box is not moving forward but sidewards development wise.
On a possitve note
PowerVU sis 4.9 east opens you have to scan transponders one buy one as it will probably lock.
Biss AU works better
Server 1.45.
Last edited:
cokeaddict
Member
- Messages
- 373
EPG Pro won't load if you restore a 1.07 or earlier channel list, instead it will initialize the box.
If you restore a channel list, it doesn't seem to add any new transponders, so if there are new ones found with a network or blindscan, then it won't scan them.
If you create a new clean channel list, then HDR is disabled,
EPG Pro will load, but as it lists all channels in view, if any are on another sat, it will move your dish, and stop at random.
In EPG Pro it says press Fav to Show Match of the Day, but that is linked by default to the blue button as there is no Fav on the remote (new style remote control), but that screen has the blue button tied to search. So no Match of the Day option.
Besides that it only shows Now and Next anyway (sometimes only 1 or the other).
If you want to move a channel then it will bring up a pop up keyboard and if you don't close it first, then when you press enter it will initalize the box.
If you want to swap a channel in the list, then it won't accept the number input, so you can't swap any channels.
BBC on 15w doesn't open.
Doesn't save Audio option (PCM / RAW) keeps defaulting to PCM.
EDIT: Forgot to mention if I scan 19.2E on the E2 side of the box it finds 1204 channels (total of tv, radio and data), on the Android side with 1.09 it finds less than 800 (total of tv and radio).
Last edited:
- Messages
- 17,534
cokeaddict
Member
- Messages
- 373
It seems rushed, which is weird as they have had since October to sort things.
- Messages
- 898
Maybe they should listen to those people who maybe tested the software for them. I don't think i'm putting it on my box.
doctor no
Registered
- Messages
- 70
Can I copy the reviews to foroKeys forum
tanks
- Messages
- 17,534
You can yes.