Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide Experimental Receiver

pier_bari said:

the channel name on the infobar didn't change

Click to expand...

So press exit, to clear the infobar, then go into channel list again, press ok and then when it shows infobar again, it should show correct name.

cokeaddict said:

So press exit, to clear the infobar, then go into channel list again, press ok and then when it shows infobar again, it should show correct name.

Click to expand...

Yes, now I already do this, as you explained.

Will this be fixed in a future update?

pier_bari said:

So will it be fixed in the next update?

Click to expand...

Well its say so but just reboot your box and see if it goes away. It does not do it on mine.

kegnkiwi said:

Well its say so but just reboot your box and see if it goes away. It does not do it on mine.

Click to expand...

This is a different issue to the one coming out of standby

pier_bari said:

Yes, now I already do this, as you explained.

Will this be fixed in a future update?

Click to expand...

Who knows, it depends on how you have the settings configured, if you change some of the settings, auto channel change (or whatever it is called) then it doesn't happen.

kegnkiwi said:

Well its say so but just reboot your box and see if it goes away. It does not do it on mine.

Click to expand...

I have already tried, even after rebooting, the problem persists

kegnkiwi said:

It will be interesting to do a blind scan on 26e with than new satellite up there.

Click to expand...

found 195 channels from my location with Triax Dish1.1

hi I want to know if possible to using any cccam or oscam on Android side of qviart dual device , my mean instead of using IKS account.

And time shifting is working perfectly now. It didn't for me with 1.06.

asaphus said:

And time shifting is working perfectly now. It didn't for me with 1.06.

Click to expand...

time shift on enigma2 freezing scrambled channels

doctor no said:

time shift on enigma2 freezing scrambled channels

Click to expand...

On which image and did it do it on the same image using 1.06?

kegnkiwi said:

On which image and did it do it on the same image using 1.06?

Click to expand...

Thanks for your reply its in all images it was the same in 1.06. you can try it thanks again.
BR

doctor no said:

Thanks for your reply its in all images it was the same in 1.06. you can try it thanks again.
BR

Click to expand...

Ok do you get any glitching whilst watching the channel live? How often does it glitch so if I test I know how long to set up a recording for.

kegnkiwi said:

Ok do you get any glitching whilst watching the channel live? How often does it glitch so if I test I know how long to set up a recording for.

Click to expand...

the live channel which FTA no problem time shift the scrambled channels work normal until we start using time shift it freez and no response to any RC time shift keys until changing the channel

doctor no said:

the live channel which FTA no problem time shift the scrambled channels work normal until we start using time shift it freez and no response to any RC time shift keys until changing the channel

Click to expand...

I've just had a play about with the e2 images i have and to be fair the time shift is not very good at all. I can get about 12 seconds of record and not much longer.

doctor no said:

time shift on enigma2 freezing scrambled channels

Click to expand...

Hi. Sorry. I should have said time shifting was ok with live tv on android side of it.

Is there a way to reset the android tv to its default condition without having to re-flash the firmware?

asaphus said:

Is there a way to reset the android tv to its default condition without having to re-flash the firmware?

Click to expand...

You can do a factory reset of the image. Menu, Settings then personal and then reset i think.

Thanks. I'm just not sure what would happen to the server I am connected to if I do that. Will it remain connected after that without contacting the dude who I bought it from?

asaphus said:

Thanks. I'm just not sure what would happen to the server I am connected to if I do that. Will it remain connected after that without contacting the dude who I bought it from?

Click to expand...

Yes it will auto reconnect