Method of Opening PowerVu Channels in Enigma2 Using Oscam

ooOO_SORGOS_OOoo · Dec 17, 2018

vavalmedeiros said:
Starone C3 e Starone C1(Brazil) Use Hash Mode 26.
please.....
thanks

http://www.sat-universe.com/showpost.php?p=2036959128&postcount=28

hisakatano · Dec 19, 2018

Measat3 - 4012V TP Change to Hash Mode 27

4012V TP Change to Hash Mode 27
(ecm) linuxsatsupport (0E00@000000/0000/0199/48:11447672C25213560AE34A96D917606F): found (1 ms) by emulator (L/1/2/2) - NBA Premium
2018/12/19 14:50:33 66796F7C r (emu) A new hash mode [27] is in use.
2018/12/19 14:50:33 2301CF0F c (-) -- Skipped 7 duplicated log lines --

hisakatano · Dec 19, 2018

Intelsat -19 4180H to Hash Mode 27

(ecm) tvheadend (0E00@000000/0000/0015/48:6AA6FA8169E062AADB957E96416BD25D): found (60 ms) by emulator (L/1/2/2) - Liga HD
2018/12/19 14:28:58 3FBE7D14 r (emu) A new hash mode [27] is in use.
2018/12/19 14:28:58 42D6F331 c (-) -- Skipped 7 duplicated log lines --

alitinko · Dec 21, 2018

Hi, is there a way to stop the "SEND!" command when emmpid has no provid?
It would also be nice to eliminate hundreds of "SKIP!" lines from the log if it's possible.
Thanks.

Code:

2018/12/21 15:41:51 431E6E2B c   (reader) myemulator [emu] EMM: reader_caid 0000 != emmpid caid 1818 -> SKIP!
2018/12/21 15:41:51 431E6E2B c   (reader) myemulator [emu] EMM: reader_caid 0000 != emmpid caid 1819 -> SKIP!
2018/12/21 15:41:51 431E6E2B c   (reader) myemulator [emu] EMM: reader 0B00 match since emmpid has no provid -> SEND!
2018/12/21 15:41:51 431E6E2B c   (reader) myemulator [emu] EMM: reader_caid 0000 != emmpid caid 0647 -> SKIP!
2018/12/21 15:41:51 431E6E2B c   (reader) myemulator [emu] EMM: reader_caid 0000 != emmpid caid 1807 -> SKIP!
2018/12/21 15:41:51 431E6E2B c   (reader) myemulator [emu] EMM: reader 0604 match since emmpid has no provid -> SEND!

Rickk · Dec 21, 2018

wrong settings in oscam
write your oscam config, reader, user etc.

alitinko · Dec 21, 2018

Rickk said:
wrong settings in oscam
write your oscam config, reader, user etc.

Thanks for your quick reply.
Here's the info you asked:

oscam.conf

Code:

[global]
disablelog                    = 1
logfile                       = /tmp/oscam.log
initial_debuglevel            = 64
nice                          = -1
waitforcards                  = 0
block_same_ip                 = 0
block_same_name               = 0
lb_mode                       = 1

[cache]
[streamrelay]
stream_relay_enabled          = 0
stream_emm_enabled            = 0

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
delayer                       = 60
ecminfo_type                  = 1
user                          = dvbapiau
read_sdt                      = 1
write_sdt_prov                = 1
extended_cw_api               = 1
boxtype                       = dreambox

[webif]
httpport                      = 8888
httprefresh                   = 10
httppollrefresh               = 10
httphideidleclients           = 0
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.user

Code:

[account]
user                          = dvbapiau
pwd                           = dvbapiau
keepalive                     = 1
monlevel                      = 4
au                            = 1
group                         = 1,2,3,4,5,6,7,8,9,10

reader in oscam.server

Code:

[reader]
label                         = myemulator
protocol                      = emu
device                        = /etc/tuxbox/config/SoftCam.Key
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010,06AD,0B00,092B
detect                        = cd
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000,000011,000014,0000FE;1010:000000;06AD:000000;0B00:000000;092B:000000
group                         = 1
emmcache 					  = 2,1,0,0
cacheex_maxhop 				  = 1
cacheex_allow_request 		  = 1
emu_auproviders               = 0E00:000000;1010:000000
auprovid 					  = 000E00
disablecrccws_only_for 		  = 0E00:000000

t86 · Dec 21, 2018

Discovery au not working on 4,8 E? Any solution

Rickk · Dec 21, 2018

emmcache = 2,1,0,0

emmcache = 2,1,2,1

Discovery au not working on 4,8 E? Any solution

emm expired or wrong format

krzyś1 · Dec 21, 2018

[dodaj] Tryb skrótu PowerVu 26
[poprawka] Kanały PowerVu z brakującymi strumieniami audio lub wideo
[poprawka] Małe optymalizacje i ulepszenia

Wszystkie kanały PowerVu powinny teraz działać BEZ potrzeby oddzielnego czytnika Emu z włączoną pamięcią podręczną.

Powinien również naprawić większość, jeśli nie wszystkie, kanałów z brakującymi lub nieodkrytymi strumieniami audio.

Proszę złożyć swoje wnioski.

The MTN package still lacks image and audio with the new oscam 11442 with emu 781

P.S.
I have VU + Zero but thanks for the information.

Rickk · Dec 21, 2018

mtn package is not supported
neither from oscam nor pwvu emu with tv card

alitinko · Dec 21, 2018

Rickk said:
emmcache = 2,1,2,1

Thanks for reply.
Initially emmcache value was like that, I changed it to 2,1,0,0 to disable emm logging but it didn't make any difference.

3satbox · Dec 21, 2018

Any idea why in my log there is a line:

Error in oscam.dvbapi: ret=0 | p: 0000 000000 0000 10000

Rickk · Dec 22, 2018

post config und log

arkanoid9 · Dec 22, 2018

Hi guys,

I tried to set everything on my oscam (Vu+duo2 and openatv) for autoroll of afn, but nothing... if i put in my soft cam the last valid keys published on this site all channels work... but when the keys changed my box doesn't find new keys.. i have these emm:

and this reader:
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00

Rickk · Dec 22, 2018

more info

arkanoid9 · Dec 22, 2018

Rickk said:
more info

which files/settings are connected with afn autoroll? so i can tell you what settings i have

Rickk · Dec 22, 2018

look my signatur

arkanoid9 · Dec 22, 2018

Rickk said:
look my signatur

I attach all files:

log:
• 2018-12-22 23:16:32 1D80649F c (-) -- Skipped 1 duplicated log lines --
• 2018-12-22 23:16:32 1D80649F c (dvbapi) Demuxer 0 restarting decodingrequests after 5 ms with 1 enabled and 1 disabled ecmpids!
• 2018-12-22 23:16:32 1D80649F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17A4 ANY CHID PMTPID 13F3 VPID 0681
• 2018-12-22 23:16:40 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:16:40 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:16:40 7D43B272 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006B ECMPID 17A4 PMTPID 13F3 VPID 0681
• 2018-12-22 23:16:40 7240494F r (emu) Key not found: P 006B 00
• 2018-12-22 23:16:40 7240494F r (emu) ECM failed: Key not found
• 2018-12-22 23:16:40 1D80649F c (ecm) anonymous (P: 0E00::006B:17A4:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected reader sid (6 ms) by myemulator (F/3/3/3) - Decoder Expired
• 2018-12-22 23:16:40 1D80649F c (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 1 disabled ecmpids!
• 2018-12-22 23:16:40 1D80649F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17A4 ANY CHID PMTPID 13F3 VPID 0681
• 2018-12-22 23:16:42 1D80649F c (ecm) anonymous (P: 0E00::006B:17A4:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): timeout (12001 ms) (F/1/1/3) - Decoder Expired
• 2018-12-22 23:16:42 1D80649F c (-) -- Skipped 1 duplicated log lines --
• 2018-12-22 23:16:42 1D80649F c (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 1 disabled ecmpids!
• 2018-12-22 23:16:42 1D80649F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17A4 ANY CHID PMTPID 13F3 VPID 0681
• 2018-12-22 23:16:50 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:16:50 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:16:50 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:16:50 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:17:00 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:17:00 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:17:02 1D80649F c (ecm) anonymous (P: 0E00::006B:17A4:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): timeout (12001 ms) (F/1/1/3) - Decoder Expired
• 2018-12-22 23:17:02 1D80649F c (-) -- Skipped 1 duplicated log lines --
• 2018-12-22 23:17:02 1D80649F c (dvbapi) Demuxer 0 restarting decodingrequests after 5 ms with 1 enabled and 1 disabled ecmpids!
• 2018-12-22 23:17:02 1D80649F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17A4 ANY CHID PMTPID 13F3 VPID 0681
• 2018-12-22 23:17:10 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:17:10 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:17:10 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:17:10 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:17:12 1D80649F c (ecm) anonymous (P: 0E00::006B:17A4:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): timeout (12000 ms) (F/1/1/3) - Decoder Expired
• 2018-12-22 23:17:20 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:17:20 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:17:20 2F923D39 r (emu) Key not found: P 006B 00
• 2018-12-22 23:17:20 2F923D39 r (emu) ECM failed: Key not found
• 2018-12-22 23:17:22 1D80649F c (ecm) anonymous (P: 0E00::006B:17A4:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): timeout (12000 ms) (F/1/1/3) - Decoder Expired
• 2018-12-22 23:17:22 1D80649F c (-) -- Skipped 1 duplicated log lines --

ncam.user:
# ncam.user generated automatically by NCAM 7.6

[account]
user = dm800se
pwd = dm800se
au = 1
group = 1,2,3,4

[account]
user = anonymous
group = 1

ncam.server:
# ncam.server generated automatically by NCAM 7.6

[reader]
label = myemulator
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1

[reader]
label = myconstantcw
enable = 0
protocol = constcw
device = /var/keys/constant.cw
group = 1

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00

[reader]
label = server2
enable = 0
protocol = newcamd
device = host
key = 0102030405060708091011121314
user = user
password = pass
group = 1

[reader]
label = server3
enable = 0
protocol = unknown
device =
caid = 0300
detect = cd
group = 3

ncam.conf:
# ncam.conf generated automatically by NCAM 7.6

[global]
logfile = /dev/tty
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -20
maxlogsize = 1024
waitforcards_extra_delay = 200
preferlocalcards = 1
readerrestartseconds = 1
block_same_ip = 0
block_same_name = 0
lb_nbest_readers = 6
lb_nfb_readers = 6
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
failbantime = 1440
failbancount = 2

[cache]
delay = 100
max_time = 30
max_hit_time = 60
cacheexenablestats = 1
csp_allow_request = 0
cacheex_cw_check = 05@032830:88:2000,05@030B00:88:2000
csp_block_fakecws = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 0500,0100,1811

[newcamd]
port = 12121@0D96:000004;12122@0624:000000
key = 0102030405060708091011121314

[cccam]
port = 0
nodeid = 0
version = 2.3.0

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dreambox
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

[webif]
httpport = 8181
httpuser = root
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
httputf8 = 0

Rickk · Dec 23, 2018

ncam config

[global]
logfile = /tmp/ncam.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -1
maxlogsize = 1024
waitforcards_extra_delay = 200
preferlocalcards = 1
readerrestartseconds = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
lb_nbest_readers = 6
lb_nfb_readers = 6
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
failbantime = 1440
failbancount = 2

[cccam]
port = 12000
nodeid = 43F7DDF9102A157E
version = 2.3.0
reshare = 0

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8181
httpuser = root
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,255.255.255.255
http_status_log = 1

ncam server

[reader]
label = constant.cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD,0940
group = 2

[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
disablecrccws_only_for = 0E00:000000
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0500:000000,021110,007400,007800;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = AFN EMU
protocol = emu
device = emulator
services = afn
disablecrccws_only_for = 0E00:000000
cacheex = 1
caid = 0E00
detect = cd
ident = 0E00:000000
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000

ncam user

[account]
user = dvbapiau
keepalive = 1
monlevel = 4
au = 1
group = 1,2,3,4,5,6,7,8,9,10

ncam services

[afn]
caid = 0E00
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D,004A,0015,0016,0018,0019,0047,0048,0049,004B,004C,000B,0004,0008,000C,000D,000F,001E,0029,002A,002B,0070

i hope that i have not prescribed myself
i will test it tomorrow

arkanoid9 · Dec 23, 2018

@Rickk following your advices and changing all values, now it WORKS!!!!!!!!
Thx a lot!!!!!!

)))))))

Method of Opening PowerVu Channels in Enigma2 Using Oscam

ooOO_SORGOS_OOoo

hisakatano

Member

hisakatano

Member

alitinko

Rickk

Registered

alitinko

t86

Rickk

Registered

krzyś1

Senior Member

Rickk

Registered

alitinko

3satbox

Registered

Rickk

Registered

arkanoid9

Rickk

Registered

arkanoid9

Rickk

Registered

arkanoid9

Rickk

Registered

arkanoid9