Method of Opening PowerVu Channels in Enigma2 Using Oscam

JimBizkit · Nov 1, 2015

your user still cannot acess the reader.
" no enabled matching ecmpids -> decoding is waiting for matching readers! "

to be safe,try this reader:
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 1
emmcache = 1,1,2,1

fmoreira · Nov 1, 2015

JimBizkit said:
your user still cannot acess the reader.
" no enabled matching ecmpids -> decoding is waiting for matching readers! "

to be safe,try this reader:
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 1
emmcache = 1,1,2,1

Thanks for your patience...

Still the same:

" no enabled matching ecmpids -> decoding is waiting for matching readers! "

JimBizkit · Nov 1, 2015

are you sure you have the config files in the right place?
this seems odd.

fmoreira · Nov 1, 2015

JimBizkit said:
are you sure you have the config files in the right place?
this seems odd.

Yes,

Place files in etc/

Can be a attributes problem?

I have defined 755 for all...

fmoreira · Nov 1, 2015

I tried a different version of oscam (Oscam-emu 11034)

And different configurations of Oscam files:

Conf
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1

[webif]
httpport = 16002
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[monitor]
appendchaninfo = 1

Server
[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 1

[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 2

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 3

[reader]
label = oscam.keys
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 4

[reader]
label = oscam.constant.cw
protocol = constcw
device = /etc/tuxbox/config/oscam.constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 5

User
[account]
description = dvbapi
user = linuxsatsupport
group = 1,2,3,4,5
keepalive = 1

The log is exactly the same....

It is an image problem?

JimBizkit · Nov 1, 2015

you only need the protocol = emu reader, the others confuse oscam-emu.
do you see these settings in the webif?
if not: configure with the webif

fmoreira · Nov 1, 2015

JimBizkit said:
you only need the protocol = emu reader, the others confuse oscam-emu.
do you see these settings in the webif?
if not: configure with the webif

I delete the other´s protocols... the same log

I can see in webif....

JimBizkit · Nov 1, 2015

maybe the oscam you are using is broken, I would try another one.
or: keep oscam.conf, oscam.server and oscam.user, but delete/remove all other oscam.* files. there are some channel cache files which can cause problems.

fmoreira · Nov 1, 2015

JimBizkit said:
maybe the oscam you are using is broken, I would try another one.
or: keep oscam.conf, oscam.server and oscam.user, but delete/remove all other oscam.* files. there are some channel cache files which can cause problems.

I did both things ..

At this moment my Oscam log:

2015/11/01 22:25:41 06000E13 r (reader) oscam_emu [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/11/01 22:25:41 77269CC1 c (dvbapi) dvbapi channelcache loaded from /etc/oscam.ccache
2015/11/01 22:25:41 77269CC1 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/11/01 22:25:42 06000E13 r (reader) oscam_emu [emu] card detected
2015/11/01 22:25:43 06000E13 r (reader) oscam_emu [emu] found card system emu
2015/11/01 22:25:43 06000E13 r (reader) oscam_emu [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/01 22:25:43 06000E13 r reading key file: /etc/SoftCam.Key
2015/11/01 22:26:36 00000000 [Emu] stream client connected
2015/11/01 22:26:36 00000000 [Emu] stream client request /1:0:1:384:1:5E:30B048:0:0:0:

Stops here and nothing else happens...

JimBizkit · Nov 1, 2015

Now it is even worse, the "(dvbapi) Demuxer 0" is missing.
I am afraid, there is some bigger problem.

Maybe you have to restart your box.
And maybe it is best for you to use the latest version, oscam-emu v726, you can watch Power-Vu without Stream relay with it.

Code:

	1) Disable the Stream Relay (on by default):
		Webif -> Config -> Stream Relay -> Mode
			0 - disabled
		
		or in oscam.conf:	
			
		[streamrelay]
		stream_relay_enabled = 0
		
	2) Select the correct DVB-Api extended CW API:
		Webif -> Config -> DVB-Api -> API for extended CWs
			1 - OE 2.2
			2 - OE 2.0
			
		or in oscam.conf:
		
		[dvbapi]
		extended_cw_api = 2

But still, your current problem is, that the emu reader is not used, and now even dvbapi does not connect. I fear I cannot help you there.

fmoreira · Nov 1, 2015

Thank you for infinite patience

Next time i have opportunity i try with another image.

Perhaps a openatv (use the image TS 3.0)

fmoreira · Nov 1, 2015

A last try with version r10943

I have this log:

2015/11/01 23:34:04 37E9A664 c (client) plain dvbapi-client granted (user1, au=auto (1 reader))
2015/11/01 23:34:04 37E9A664 c (dvbapi) dvbapi channelcache loaded from /etc/oscam.ccache
2015/11/01 23:34:04 37E9A664 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/11/01 23:34:04 7105F003 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/11/01 23:34:05 7105F003 r (reader) emulator [emu] card detected
2015/11/01 23:34:06 7105F003 r (reader) emulator [emu] found card system emu
2015/11/01 23:34:06 7105F003 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/01 23:34:06 7105F003 r reading key file: /etc/SoftCam.Key
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1773 PROVID: 000000
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 serving srvid 0003 (0E00@000000:0003 unknown) on adapter 0000 camask 0004 index 0002 pmtpid 138B
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1773 ANY CHID PMTPID 138B VPID 0550
2015/11/01 23:34:11 37E9A664 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2015/11/01 23:34:11 37E9A664 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1773 ANY CHID PMTPID 138B VPID 0550

glamide · Nov 2, 2015

thanks a lot joeuser, for your help also am back home this last weekend.but have still never get this oscam working on my dreambox, infact i still try openpli image but no success after changing the oscam from the plugin.further help will be appreciated

fcs001fcs · Nov 2, 2015

I noticed that yesterday the jahntheman committed some changes to the OSCAM EMU that may eliminate the use of stream relay for DES. The readme text is as follows:

On compatible Dreambox STBs:
1) Disable the Stream Relay (on by default):
Webif -> Config -> Stream Relay -> Mode
0 - disabled
or in oscam.conf:
[streamrelay]
stream_relay_enabled = 0
2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
1 - OE 2.2
2 - OE 2.0
or in oscam.conf:
[dvbapi]
extended_cw_api = 2
On other devices the Stream Relay must be used:

The questions I have are:

1 Will this work with a DM7020HD V1 with latest OpenPLi 4?
2 Will it work with a VU+ Zero with latest OpenPLi 4?
3 It seems to be only for DES since one of his commits was titled "now supporting des decoding via dvbapi". What channels does this affect?

JimBizkit · Nov 2, 2015

1. Yes, it should, but whether it works with openPLI I do not know.
2. Untested, most likely not (Dreambox only)
3. It works for Powervu DES and CSA -> all channels.

kebien · Nov 2, 2015

It looks like the new patch can access the hardware DES decoder in the chip inside dm800,in which case there is not need to stream out the demux to decrypt offline and stream it back.
If this patch works,it should work as any emulator you been using so far.

fmoreira · Nov 2, 2015

naja said:
A last try with version r10943

I have this log:

2015/11/01 23:34:04 37E9A664 c (client) plain dvbapi-client granted (user1, au=auto (1 reader))
2015/11/01 23:34:04 37E9A664 c (dvbapi) dvbapi channelcache loaded from /etc/oscam.ccache
2015/11/01 23:34:04 37E9A664 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/11/01 23:34:04 7105F003 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/11/01 23:34:05 7105F003 r (reader) emulator [emu] card detected
2015/11/01 23:34:06 7105F003 r (reader) emulator [emu] found card system emu
2015/11/01 23:34:06 7105F003 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/01 23:34:06 7105F003 r reading key file: /etc/SoftCam.Key
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1773 PROVID: 000000
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 serving srvid 0003 (0E00@000000:0003 unknown) on adapter 0000 camask 0004 index 0002 pmtpid 138B
2015/11/01 23:34:08 37E9A664 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1773 ANY CHID PMTPID 138B VPID 0550
2015/11/01 23:34:11 37E9A664 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2015/11/01 23:34:11 37E9A664 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1773 ANY CHID PMTPID 138B VPID 0550

Finally it is working ...

Once again thanks for your tremendous patience, JimBizkit .

What i did:
I installed the version r 10943

I deleted all the files from oscam (except conf, server and user)

I did both simultaneously, so i don´t know what solved...

Have lot´s of freezes in AFN channel´s and a few on Discovery channel´s...

Can I improve that?

an image with the "Include in ECM http streams" option improved freezes?

Thanks again!

joeuser · Nov 2, 2015

Try a newer version of oscam-emu, those freezes have been fixed since 10943.
And yes, including ecm in streams is better.

joeuser · Nov 2, 2015

kebien said:
It looks like the new patch can access the hardware DES decoder in the chip inside dm800,in which case there is not need to stream out the demux to decrypt offline and stream it back.
If this patch works,it should work as any emulator you been using so far.

Also enables using separate cws for video and audio. Other systems use the same cw for video and audio. (That is why even the csa powervu channels could not be decrypted properly before)

kebien · Nov 3, 2015

joeuser
I see there is a fix for channels using same sid
But no matter what I tried the channels do no clear
I used readme format
Channel #1: P .............
Channel #2

..........
But is not working,also tried removing spaces and the #,no luck.
Also autoroll is not working,or at least i can;t configure it right.
Does anybody has this issues working?

By the way,CSA has also provisions for different CW for video and audio ,is just they never used it.
Do you happen to know what are the dvbapi command set for setting up DES descrambling in the CA device? otherwise I will look at the repository.

Method of Opening PowerVu Channels in Enigma2 Using Oscam

JimBizkit

Registered

fmoreira

Registered

JimBizkit

Registered

fmoreira

Registered

fmoreira

Registered

JimBizkit

Registered

fmoreira

Registered

JimBizkit

Registered

fmoreira

Registered

JimBizkit

Registered

fmoreira

Registered

fmoreira

Registered

glamide

fcs001fcs

JimBizkit

Registered

kebien

Registered

fmoreira

Registered

joeuser

Registered

joeuser

Registered

kebien

Registered