Method of Opening PowerVu Channels in Enigma2 Using Oscam

D

dr_virus

Banned
Messages
35
does anyone has a softcam with all working channels of PowerVu ?

As far i can see the only working keys are those for 1 west
 
G

Ghouri

Registered
Messages
154
dr_virus said:
does anyone has a softcam with all working channels of PowerVu ?

As far i can see the only working keys are those for 1 west
Click to expand...

I will try to upload softcam.key file with all available keys by tonight (then you may check and let me know which are working and which not).
 
K

kalehrl

Registered
Messages
147
dr_virus said:
does anyone has a softcam with all working channels of PowerVu ?

As far i can see the only working keys are those for 1 west
Click to expand...

I added channels on 1W and 9E (v2 or v3 version of my bundle). The problem is, no one makes PowerVu keys in the oscam-emu format so there's a lot of tedious manual work coupled with adding channels via dreamboxedit.
 
L

lider

Registered
Messages
78
humaxboy2 said:
Can somebody confirmed to me that it is NOT working on Vu Solo2 + OpenATV 5.0 ?
I'm getting this in oscam log, the channel seems to be decoded.
This is example on the Animal Planet HD on 1W (SID : A28 HEX, 2600 DEC)

2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1F7C PROVID: 000000
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 found 1 ECMpids and 18 STREAMpids in PMT
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 serving srvid 0A28 (0E00@000000:0A28 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0A82
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1F7C ANY CHID PMTPID 0A82 VPID 0A28
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:6FEC022EE903B7C63B1CB4B58DBC5745): found (2 ms) by emulator
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:F0BF2A7F38526D77B6BBC2BFDDFACC4C): found (2 ms) by emulator
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:02F978EFE36DC0290E79EBE3A8254156): found (2 ms) by emulator
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:0483B55CA62FE15A154467C3BCDB1A6B): found (3 ms) by emulator
2015/07/13 22:16:21 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:C0D7CA6CE75873B32070C0E32DAD5225): found (2 ms) by emulator
2015/07/13 22:16:22 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:84C36F7D446F9047EBE11F89C87EA7E9): found (2 ms) by emulator
2015/07/13 22:16:23 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:D67409F0C32C4843BBA18512A19C5780): found (1 ms) by emulator
2015/07/13 22:16:24 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:214410FB6B5535E9ADA68F15C94A1E28): found (2 ms) by emulator
2015/07/13 22:16:25 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:A4FFCA907D3E9EDFC1F057165BF167A4): found (1 ms) by emulator
2015/07/13 22:16:25 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:4224F80DD38DCD67408D8DDBF439D4C1): found (2 ms) by emulator
2015/07/13 22:16:26 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:0B1A014985973A487EBF0F7261ED3524): found (1 ms) by emulator
2015/07/13 22:16:27 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:C692F91CEE1C78117F7D50E9A61D6FE1): found (1 ms) by emulator
2015/07/13 22:16:28 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:A08821CB902DF6F4BB2DE503AA06577D): found (1 ms) by emulator
2015/07/13 22:16:29 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:BE8B543B55987ED172FE2F87AD953800): found (2 ms) by emulator
2015/07/13 22:16:29 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:0BEB04FBDAD01A8853EF92C7958EB41C): found (3 ms) by emulator
2015/07/13 22:16:30 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:7E83E8E789A97E99776F03F5BA38A8FF): found (1 ms) by emulator
2015/07/13 22:16:31 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:07B32A45BC29ABC864A40CB8411363EB): found (2 ms) by emulator
Click to expand...

my logs :)
and not open
channel is black screen solo2
 
L

lider

Registered
Messages
78
my new files and opens
idx, disco poland, disco history, thx, disco iberia is open

disco hd showcase, animal, science not ok
 
L

lider

Registered
Messages
78
my think vu+solo2 drivers not open
disco hd showcase animal and science hd
but open others ch
 
K

kalehrl

Registered
Messages
147
I'm in the process of adding keys on 4.8E but I don't have signal on:
Code: 
4.8°E 	Astra 4A 	12226.00	H	B27	Europe	DVB-S	QPSK	25540 7/8	Discovery-Europe
Do you guys get it?
 
A

APPLIANCES

Registered
Messages
70
Ghouri said:
Here is PowerVu SoftCam for Oscam Emu for use in Enigma2 Receivers:
PowerVu SoftCam for Oscam Emu-engineerkhan15.rar

Please check it and give me feedback about it that which package is opening and which not.
Click to expand...

Hi, thanks for your hard work on producing the powerVU softcam.key file.
Is there a fix for the issue where the same P Ident appears more than once. E.g.
P 0040 00 6DXXXXXXXXXXXX ;AFN Prime Pacific,9.0E, 11804
P 0040 01 9EXXXXXXXXXXXX ;AFN Prime Pacific,9.0E, 11804
And later
P 0040 00 01XXXXXXXXXXXX ;Snai Sat, 16E, 12699
P 0040 01 97XXXXXXXXXXXX ;Snai Sat, 16E, 12699

So that when your box is trying to open AFN Prime Pacific it end up using the keys for Snai Sat and thus does not open. I added # in front of the Snai Sat key as a temp fix.

REGARDS
 
G

Ghouri

Registered
Messages
154
APPLIANCES said:
Hi, thanks for your hard work on producing the powerVU softcam.key file.
Is there a fix for the issue where the same P Ident appears more than once. E.g.
P 0040 00 6DXXXXXXXXXXXX ;AFN Prime Pacific,9.0E, 11804
P 0040 01 9EXXXXXXXXXXXX ;AFN Prime Pacific,9.0E, 11804
And later
P 0040 00 01XXXXXXXXXXXX ;Snai Sat, 16E, 12699
P 0040 01 97XXXXXXXXXXXX ;Snai Sat, 16E, 12699

So that when your box is trying to open AFN Prime Pacific it end up using the keys for Snai Sat and thus does not open. I added # in front of the Snai Sat key as a temp fix.

REGARDS
Click to expand...
Same thing was also bothering my mind while compiling the softcam. But that has to be like it keeping in view that format of key. I think if oscam tries key for other channel with same SID and it is not working then it should automatically switch to the actual key available in the softcam.
Did you try it first as it is or not? If not tried then do try without modification and see the result and let me know. And if you tried it and it was not working without modification then I am afraid we have to use separate softcam for each package (especially when there are similar SIDs).
 
fiji

fiji

Member
Messages
1,087
Find SID Easy For oscam PVU Softcam

Spacial Thanks For SU Team For Provide This Nice Tool .

4 Steps To Find PowerVU Channels 's SIDs Create Oscam SOftcam Easy This Tool .
SID FINDER

1- Click On KingOfSat
2-Click Satellite
2zpjb00.png


3-Choose Satellite Name Want To Know
4hz5f9.png


4- Check Channels List WIth Require SID
108bhoh.png


Remember Must Online When Find SID .
 
Last edited:
A

APPLIANCES

Registered
Messages
70
Ghouri said:
Same thing was also bothering my mind while compiling the softcam. But that has to be like it keeping in view that format of key. I think if oscam tries key for other channel with same SID and it is not working then it should automatically switch to the actual key available in the softcam.
Did you try it first as it is or not? If not tried then do try without modification and see the result and let me know. And if you tried it and it was not working without modification then I am afraid we have to use separate softcam for each package (especially when there are similar SIDs).
Click to expand...

Yes I did first try your file unedited. It was only when AFN Prime Pacific, 9.0E did not open that I noticed that later in the file the same P Ident occurred. When I added a # in front of this later P Ident AFN Prime Pacific, 9.0E opened.
When trying to open AFN Prime Pacific, 9.0E the box seems to search the softcam file for a key based on the AFN Prime Pacific P Ident. If the box finds more than one P Ident that matches the P Ident it is looking for it uses the key from the last P ident in the list. This could be the wrong key, a key for another channel.

Regards
 
You must log in or register to reply here.
Top