What's new
Sat Universe - The Place To Be

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

tv max 5500 fta (arion/victory clone)

M

michelk

Registered
Hello,

I have one problem with this receiver...
i have normal signal on most H pol programs, but on V pol I haven't signal at all. Lnb is ok, because on other receiver everything works fine. I thought it was tuner, but i was replace it and still have the same problem. what can be? maybe one of condensators or something else?

Thanks!
 
JAKITAKI

JAKITAKI

Super VIP
michelk said:
Hello,

I have one problem with this receiver...
i have normal signal on most H pol programs, but on V pol I haven't signal at all. Lnb is ok, because on other receiver everything works fine. I thought it was tuner, but i was replace it and still have the same problem. what can be? maybe one of condensators or something else?

Thanks!
Click to expand...


Check or replace

- Capacitor (470uF/16v)
C11.C12, C13
 
M

michelk

Registered
JAKITAKI said:
Check or replace

- Capacitor (470uF/16v)
C11.C12, C13
Click to expand...

Power supply isn't problem. i was try with another one from working receiver, but problem was the same. btw...on c11 i have 4,7uF/50V.
later tv max receivers have some different tile power.
 
JAKITAKI

JAKITAKI

Super VIP
michelk said:
Power supply isn't problem. i was try with another one from working receiver, but problem was the same. btw...on c11 i have 4,7uF/50V.
later tv max receivers have some different tile power.
Click to expand...


check the voltage at the output
- On pol.V 14v
- On pol.H 18v
 
M

michelk

Registered
JAKITAKI said:
check the voltage at the output
- On pol.V 14v
- On pol.H 18v
Click to expand...

checked...V pol 15,3V, H pol 20,4V.
But, on some H pol freq. i haven,t signal too (e.g. ORF). All frequencies are updated, so it isn't problem in freq. I have motor, and when i nudge it, signal appears, but as soon as the motor stop, the signal disappears. i repeat, with the same other receiver, everything works fine.
I checked voltage on working receiver now... H - 18,33V, V - 13,89V. Maybe voltage are to high on first receiver?
 
Last edited:
You must log in or register to reply here.
Top