-
Discussion in the Admin room about nightly images, we dont really need or want these posting for the following reasons.
1. We all know where to get them.
2. Never have a change log.
3. The changes if any are not worthy of anyone upgrading there boxes on a daily basis.
4. They clutter the forum up.
Posts will be removed.
Ferret
Firmware for Satycon HD, Argus and Imperial
- Thread starter elgeneral
- Start date
Gracias tani1
Infos
New firm v11.1 earl
Well, we already have the version 11.1_earl for Satycon hd 3000, in this case, thank you very much crab man who wanted to help earl in this firm without it I knew, but even tried to disguise himself and go incognito, with a camera hidden what sat666 has caught and recognized by compiling this new firmware, earl has good friends who help you finish your list
NEWS:
- Fixed small bug internally
- Fixed bar channels in HD signal
- Fixed bug in loss of emulation by sharing newcamd when it is shut down with the remote and then turn on again, that I had to go through a channel free to recover the viewing.
- Fixed bug where emulation loss was to radio channels and then turned to TV channels.
- Cards card system compatible with *** (Sky Italia, British Sky, premier ..)
RECOMMENDED WAY UPDATE
USB TYPE = 9, PenDrive INSERT INTO THE FILES OF THE TWO FILE.
Randy next version 11.2 LOG IN ACTION
gracias Тайна го
Infos
New firm v11.1 earl
Well, we already have the version 11.1_earl for Satycon hd 3000, in this case, thank you very much crab man who wanted to help earl in this firm without it I knew, but even tried to disguise himself and go incognito, with a camera hidden what sat666 has caught and recognized by compiling this new firmware, earl has good friends who help you finish your list
NEWS:
- Fixed small bug internally
- Fixed bar channels in HD signal
- Fixed bug in loss of emulation by sharing newcamd when it is shut down with the remote and then turn on again, that I had to go through a channel free to recover the viewing.
- Fixed bug where emulation loss was to radio channels and then turned to TV channels.
- Cards card system compatible with *** (Sky Italia, British Sky, premier ..)
RECOMMENDED WAY UPDATE
USB TYPE = 9, PenDrive INSERT INTO THE FILES OF THE TWO FILE.
Randy next version 11.2 LOG IN ACTION
gracias Тайна го
Argus & Clones
These 3 boxes are Upd. supportet by 3 teams.
IlTV the team, which the FW of Argus supports, and the team which Sat666 Satycon HD3000 supports.
Generally, you can each BA on each of the 3 boxes flash.
This is the most important foreign currency for each receiver adjusted (fixed) is.
When you flash the firmware, the manufacturer ID of the query box, and only if they match, the software can also easily flash.
Patched the 3 boxes are equal. Analog this guide.
Instructions to restore the EMU firmware via RS232 interface.
You need:
- Null modem cable
- Genuine serial interface from a PC or laptop for ExpressCard (no USB2 serial cable)
- The program Setedit-Argus
- The emu firmware from "I love you TV or a BA from the CloneControl Satycon.
To play the emu firmware:
- Receiver via null modem cable to the PC.
- The program launch Setedit Argus.
- In Setedit on file - Receivers click software update
- In the next window, select the SW (. Bin file)
- The screen displays follow
- Receiver switch off the network.
- Transmission in Setedit start, and the receiver on the power switch back on.
- When you boot up the receiver of this update the FW.
- This may be a certain time, you can update the program Setedit and on the receiver display verfogen.
Important: Even if the Setedit OK message comes, the receiver off or disconnect from power, it will be in the DR processed receiver yet!
This update is successful, then appears on the receiver display the message "GOOD" what the receiver newly bootet.Dieses necessarily wait!
With some versions of firmware after the "GOOD" does not automatically rebooted. If that is the case, then after a short waiting period of approximately one minute at the receiver power switch & again.
If using a USB stick flashed, the receiver remains in "Good" are, then 1 minute wait at the box off the power switch, USB stick off and on again.
Before patching, please list your channel from the receiver read, because when these patches will be overwritten.
Thus, so should your Argus or clone ready to be patched! The emu is on the firmware upgrade enabled
These 3 boxes are Upd. supportet by 3 teams.
IlTV the team, which the FW of Argus supports, and the team which Sat666 Satycon HD3000 supports.
Generally, you can each BA on each of the 3 boxes flash.
This is the most important foreign currency for each receiver adjusted (fixed) is.
When you flash the firmware, the manufacturer ID of the query box, and only if they match, the software can also easily flash.
Patched the 3 boxes are equal. Analog this guide.
Instructions to restore the EMU firmware via RS232 interface.
You need:
- Null modem cable
- Genuine serial interface from a PC or laptop for ExpressCard (no USB2 serial cable)
- The program Setedit-Argus
- The emu firmware from "I love you TV or a BA from the CloneControl Satycon.
To play the emu firmware:
- Receiver via null modem cable to the PC.
- The program launch Setedit Argus.
- In Setedit on file - Receivers click software update
- In the next window, select the SW (. Bin file)
- The screen displays follow
- Receiver switch off the network.
- Transmission in Setedit start, and the receiver on the power switch back on.
- When you boot up the receiver of this update the FW.
- This may be a certain time, you can update the program Setedit and on the receiver display verfogen.
Important: Even if the Setedit OK message comes, the receiver off or disconnect from power, it will be in the DR processed receiver yet!
This update is successful, then appears on the receiver display the message "GOOD" what the receiver newly bootet.Dieses necessarily wait!
With some versions of firmware after the "GOOD" does not automatically rebooted. If that is the case, then after a short waiting period of approximately one minute at the receiver power switch & again.
If using a USB stick flashed, the receiver remains in "Good" are, then 1 minute wait at the box off the power switch, USB stick off and on again.
Before patching, please list your channel from the receiver read, because when these patches will be overwritten.
Thus, so should your Argus or clone ready to be patched! The emu is on the firmware upgrade enabled
Firm 11.1b Hd3000
OK N3-Cards
Card-ACCESS VIA 2.6 and 3.0 OK car
Cards 3 auto-SECA
Irdeto OK-Cards
***-cards PREMIER OK
- Fixed bug of not allowing decimal 1 and 3 in motor-mode data USALS.
- Other purges in compilation firm.
IMPORTANT:
- To marry the card n3 with the receiver must know the data k boxk eyy rsa, once we have these data are in the editor's deco keys with the remote control or by using the caslink that accompanies via com port.
- Enter through usb stick firm option altogether.
OK N3-Cards
Card-ACCESS VIA 2.6 and 3.0 OK car
Cards 3 auto-SECA
Irdeto OK-Cards
***-cards PREMIER OK
- Fixed bug of not allowing decimal 1 and 3 in motor-mode data USALS.
- Other purges in compilation firm.
IMPORTANT:
- To marry the card n3 with the receiver must know the data k boxk eyy rsa, once we have these data are in the editor's deco keys with the remote control or by using the caslink that accompanies via com port.
- Enter through usb stick firm option altogether.
NEW RELASES SATYCON HD3000 VERSION 11.1C:
Code:
- AUTO RUMANIA OK
- CORREJIDO NEGRO CUANDO PULSABAS EN EPG EN UN CANAL EMULADO POR EMU.
- CORREJIDOS ALGUNOS BUG EN SUBTITULOS CANAL D + AHORA ESTABLES.
- CORREJIDO EL PONER PONER ALGUNOS DECIMALES COMO 1 O 3 EN CONFIGURACION MOTOR USALS.
- CORREJIDO SALTOS EN CANALES ORF O ORF HDnew hd3000 v12_01build
Tomorrow version for Argus and Imperial :thum:
Code:
Novedades:
-2 server newcamd funcionales a la vez.
- solucionado ping host
- solucionado lentitud al mover canales tras darle a ok.
- Añadido carga firm por FTP
- otros pequeños bug solucionados en compilacion
BUG OBSERVADOS:
mal funcionamiento del leed del receptor
A ATENER EN CUENTA:
Una vez cargado el firmware por usb opcion 9, si quereis probar la funcionalidad de la carga por ftp, se adjunta junto al firm un programa, parcheais el firm con el lo subis a un ftp y ya lo podreis cargar.Tomorrow version for Argus and Imperial :thum:
New firm para satycon hd 3000.
new hd3000 v12_03build
Fix for Argus and Imperial Comming soon
new hd3000 v12_03build
Code:
NOVEDADES:
- Logueo por puerto Com (para ello podemos utilizar por ejemplo el hiperterminal de windows.
- Carga lista canales por Ftp, ya se pueden cargar listas canales via Ftp, una vez cargado el firm podemos observar que a la hora de cargar un archivo bin nos aparece la opcion data (la podemos usar para cargar listas canales), y la opcion data-img (la podemos utilizar para cargar todo el firm).
A la lista canales tb hay que hacerle lo del crc para que se cargue, os adjunto el firm y una lista canales (ojo a ambos en caso que querais cargarlo por ftp hacer primero el crc a ambos)
1º cargar el firm y luego si kereis probar la carga lista canales por correjis el crc de la lista y luego ya la podeis cargar por ftp.
Un saludo[/B]Fix for Argus and Imperial Comming soon
Nuevo firmware para satycon hd 3000 version 13.
- Opcion pvr ok (pruebas realizadas con usb 4gb), grabaciones ok de mas de una hora
- Posibilidad de log on/off (esta opcion se halla en el menu sharing)
- Opciones antena usals bug solucionados.
- Carga firms y listas canales por FTP ok.
- Otros pequeños bug solucionados
gracias Тайна го
- Opcion pvr ok (pruebas realizadas con usb 4gb), grabaciones ok de mas de una hora
- Posibilidad de log on/off (esta opcion se halla en el menu sharing)
- Opciones antena usals bug solucionados.
- Carga firms y listas canales por FTP ok.
- Otros pequeños bug solucionados
gracias Тайна го
Code:
[B][COLOR="Red"]new hd3000 v14[/COLOR][/B]
New firm para satycon hd 3000 version 14.
- Correjido id e informacion para satycon.
- correjidos otros bug derivados de la depuracion de codigo.
- Ahora en el espacio de la flash del deco dedicado a las listas de canales con este nuevo firm va tambien guardada informacion relativa a las grabaciones de canales, por lo que las listas anteriores a este firm pueden tener un compartamiento defectuoso o producir errores, por lo que es recomendable realizar nuevas listasFix for Argus and Imperial
Gracias una vez mas a sat666