SANTO_DOMINGO
Registered
- Messages
- 479
Dm600pvr + Compactflash + Barryallen
A small manual as I put the barryallen in a CF, so they do not work too hard disks
Requirements:
-- A 44 pin IDE cable
-- A CF-IDE adapter
-- CF
That is very fast, at least 266x.
1) Install all
2) what I found here.
Hard disk: / dev/ide/host0/bus0/target0/lun0 /
CompactFlash: / dev/ide/host0/bus0/target1/lun0 /
So I think FC and the formatting partitions. The formatting and that brings a new fat32. This can be done via computer or from Dreambox menu. Even then I think the barry makes it so that it would not be necessary, but just in case I have done and I have not had any problems.
3) I am an image enigma2 for 600.
4) Download barryallen a shared folder and copy the hard drive of the DreamBox or / var / tmp.
5) installation from Telnet
Code:
ipkg install enigma2-plugin-extensions-barryallen_4.5.6_powerpc.ipk
or
ipkg install /tmp/enigma2-plugin-extensions-barryallen_4.5.5_powerpc.ipk
(Important: In my DM600 only works with the file powerpc.ipk. The mipsel.ipk not working.)
7) Copy all the images you want in the folder / media / hdd / MB_Images a shared folder
8) Unzip the images. From the menu of the image can be done in plugins - BarryAllen.
For Telnet also:
Code: cd /media/ba
./ba.sh extract <nombre de la imagen>
9) Restart from the menu
With gemini flash tried to reformat ..
Thx jesusvell
A small manual as I put the barryallen in a CF, so they do not work too hard disks
Requirements:
-- A 44 pin IDE cable
-- A CF-IDE adapter
-- CF
That is very fast, at least 266x.
1) Install all
2) what I found here.
Hard disk: / dev/ide/host0/bus0/target0/lun0 /
CompactFlash: / dev/ide/host0/bus0/target1/lun0 /
So I think FC and the formatting partitions. The formatting and that brings a new fat32. This can be done via computer or from Dreambox menu. Even then I think the barry makes it so that it would not be necessary, but just in case I have done and I have not had any problems.
3) I am an image enigma2 for 600.
4) Download barryallen a shared folder and copy the hard drive of the DreamBox or / var / tmp.
5) installation from Telnet
Code:
ipkg install enigma2-plugin-extensions-barryallen_4.5.6_powerpc.ipk
or
ipkg install /tmp/enigma2-plugin-extensions-barryallen_4.5.5_powerpc.ipk
(Important: In my DM600 only works with the file powerpc.ipk. The mipsel.ipk not working.)
7) Copy all the images you want in the folder / media / hdd / MB_Images a shared folder
8) Unzip the images. From the menu of the image can be done in plugins - BarryAllen.
For Telnet also:
Code: cd /media/ba
./ba.sh extract <nombre de la imagen>
9) Restart from the menu
With gemini flash tried to reformat ..
Thx jesusvell