NEW Rescue Loader

Why so complicated?

Telnet:

Update-rescue -v

What image do you have?

root@dm7080:~#root@dm7080:~# update-rescue -v
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm7080/release/rescue-image-dm7080.bin.sig'
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm7080/release/rescue-image-dm7080.bin'
[*] Verifying signature of 'rescue-image-dm7080.bin'
gpgv: Signature made Fr 23 Dez 2016 01:44:12 CET using RSA key ID Dxxxx
gpgv: Good signature from "Dreambox DM7080 Recovery <[email protected]>"
[*] Writing rescue image to flash
Manufacturer ID: c2
Memory type : 20
Memory density : 18
read id ok
comparing 2717 sectors...
nothing to do
[*] Done.
root@dm7080:~#

Click to expand...

Linux dosen't like big letter's, use a small "u" in "U"pdate-rescue -v
Works fine her on DE6..

/Spawn

Did you read what @ Spawn32 had written?

root@dm900:~# Warning: Please consider updating your rescue loader!
-sh: Warning:: command not found
root@dm900:~# [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/rescue-image-dm900.bin.sig'
-sh: [*]: command not found
root@dm900:~# [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/rescue-image-dm900.bin'
-sh: [*]: command not found
root@dm900:~# [*] Verifying signature of 'rescue-image-dm900.bin'
-sh: [*]: command not found
root@dm900:~# /usr/sbin/librecovery: line 579: /usr/bin/gpgv: Permission denied
-sh: /usr/sbin/librecovery:: No such file or directory
root@dm900:~# Fatal: Failed to verify signature
What i must to do that run DM900?:clapping:

I got problem where the box just can recognize with putty with serial, there's no ip address detected. How can i flash the box with this case? Thx so much mate

Here's putty log

single board
MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed

Sent from my droid

The box has to be repaired!
To the dealer or send to Dreambox.

Edit: Is that the same error?

Yes it is..is there anyway to repair it before sending it back to dealer or dreambox?

Sent from my droid

If it is the same error, then it must be exchanged / repaired.
Read what @Reichi wrote, this is a Dream Dev

cyberworld23 said:

I got problem where the box just can recognize with putty with serial, there's no ip address detected. How can i flash the box with this case? Thx so much mate

Here's putty log

single board
MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed

Sent from my droid

Click to expand...

i have same problem and logs are same is any slotion before sending to dreambox

The only one solution, send it to dmm

Sent from my place

have you tried the patched version of dreamup

Does not exist dreamup for dm900.