mr.strauss
Well Known Member
- Messages
- 8,414
How to flasht an openatv image for DM900
1) Download the current image
2) Zip File openatv-5.3-dm900-...._web.zip Unpacking in the folder dm900 you can find the following files:
4) Box Turn on then immediately press the standby button and hold it you can see that this red / violet flashes when the button red lights please release again.
5) IP from the TV screen Read or display the display.
7) Now use the Firmware Upload and Browse ... button to select the previously loaded image and start the flash operation.
8) Remove hook for backup and restore We do not want the Dream OS settings to be transferred into the openATV.
9) Reboot now the box restart.
Thx @ Captain
1) Download the current image
2) Zip File openatv-5.3-dm900-...._web.zip Unpacking in the folder dm900 you can find the following files:
3) Switch off the power switch on the rear panel.Info: with the openATV there is also an online updater once you have an ATV image installed you can simply install a new image via the image, Video
4) Box Turn on then immediately press the standby button and hold it you can see that this red / violet flashes when the button red lights please release again.
5) IP from the TV screen Read or display the display.
7) Now use the Firmware Upload and Browse ... button to select the previously loaded image and start the flash operation.
8) Remove hook for backup and restore We do not want the Dream OS settings to be transferred into the openATV.
INFO: The openATV images have a rootfs.tar.bz2 in the folder dm900
Dream OS Images use tar.xz
9) Reboot now the box restart.
Thx @ Captain
Last edited: