scaning transponder nums

try looking in new on the satellite names should be in there

what channels are they if they are red button channels you will need to transfer the settings from your box to your pc with dreambox edit,then change them channels from data to TV Type save them,then send them back to your box,then you should see them in your list.

what are the channels you have scanned in try a reboot and see if they are there afterwards

yeah you need to change them from data to TV Type unless you download some settings with them already done,is it just a fixed dish on 28e or motorised setup

so you will be better off editing them yourself and just changing them few channels to TV Type from DATA

i think there may be a tutoral by Ferret in the tutoral section

download deambox edit then download this tutoral http://www.sat-universe.com/showthread.php?t=174638 the pics from it will help you to setup dreambox edit with your receiver, make a new folder on your desktop and call it SETTINGS,after you have dreambox edit setup correctly you need to get the settings from your box to the SETTINGS folder you created on your desktop

when you have dreambox edit configed click on the icon in pic 1


then follow pic 2


then follow pic 3


after you have done that you should see pic 4


next step is to change the data channels to TV type in pic 5


right click on any data channel then scroll down to change type to TV,after you have done all these make sure you click on the save icon at the top,do it twice to make sure