JACK MODULE

Status
Not open for further replies.

elgeneral

Registered
Messages
7,811
capturagvh.png


Supported systems

Version 1.0

conax
cryptoworks
irdeto
nagra
***
viaccess

Note:

I no have more info about new module cam only this files

saludos
 

elgeneral

Registered
Messages
7,811
Jackcam Modul JMOD1.0.1 2

Supported systems Version 1.0.1

digicrypt
conax
cryptoworks
irdeto
nagra
***
viaccess
 

Haitoku

Registered
Messages
3,933
JackCam

Supported systems Version 1.1.0

SUPPORTED SYSTEMS
digicrypt
conax
cryptoworks
irdeto
nagra
***
viaccess

NEW:
Added support for emulators.
Now it is possible to update the cam with Fausto's keys.bin files.
Just add the BIN file to the programmer and insert in module.
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
Version 1.1.0

Supported Systems

SUPPORTED SYSTEMS
digicrypt
conax
cryptoworks
irdeto
nagra
***
viaccess

Emulator
Now it is possible to update the cam with Fausto's k e y s. bin files.
- clear memory on Jackprog memory.
- Just add the BIN file to the programmer
(note: HW ver. 1.5) and insert in the module.
- green+red LED blinking.

App Update tutorial:

CONNECT THE JACKPROG WITH A USB CABLE TO THE PC KEEPING
THE RESET BUTTON PRESSED. IF YOU KEEP THE BUTTON PRESSED FOR
MORE THEN 5 SECONDS IT WILL PERFORM A COMPLETE FORMAT.

RELEASE THE RESET BUTTON.

WAIT FOR A WINDOW TO OPEN ON THE PC SCREEN
GREEN AND BLUE LED WILL TURN ON.

MOVE (COPY) THE APP.BIN FILE INTO THE OPEN WINDOW (PC).

DISCONNECT THE JACKPROG FROM THE USB PORT.

INSERT THE JACK MODULE IN THE CI OF THE TV OR OF THE RECEIVER.

WAIT FOR INICIALIZE (5-6 SECONDS) MODULE.

INSERT THE JACKPROG IN THE SLOT OF THE JACK MODULE
WITH THE CONTACTS HEADING UP.


WAIT FEW MINUTES TILL THE RED LED STOPS
WITH FLICKERING (BLINKING) AND ALL 3 LEDS START
WITH FLICKERING (BLINKING) TOGETHER.

REMOVE THE JACKPROG.

RESTART TV OR RECEIVER DEVICE.
 

bozomustafa_68

Registered
Messages
16,935
Version 1.2.7
*Small bug corrections

_______________________________

Code:
SUPPORTED SYSTEMS
digicrypt
conax
cryptoworks
irdeto
nagra
***
viaccess
 

bozomustafa_68

Registered
Messages
16,935
JackModule Version 1.3.1 BETA
- TRY AT YOUR RISK!!


Code:
- Fixed the languages
- Added two different controller for the *** emm
- Added a fast Card Init
 
Status
Not open for further replies.
Top