Back Up Vu+ Ultimo Images

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod BlackHole 1.7.1 Vu+ Ultimo


Installation and initial settings::

First, download the latest version of the new image for usb installing cihazımıza: Vu + Ultimo'ya how the image is thrown from USB? (Contacts).

After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.
DHCP on the network.

Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.

To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

Backupda Channel List TurkuazPanel 'loaded from.

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(December 26, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 has been added satellites. Added lists as old satellites.)
@ Galaxy2002

Channel setting is sure to reboot after installing the device.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Add-on (plugin) installs are doing:

Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

Quote:

Add-on manager;
PermanentClock under the System category,
Setpasswd under the System category (the password is assigned),
StartUpService under the System category (Channel D),
VlcPlayer under the Software category,
SimpleRSS under the category of Multi-media (not active),
VirtualZap under the category of Multi-media (press and hold the arrow key),
Multi-media category was established under the Weatheer Plugin.

Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.

In line with our desire to do other simple config for:

Quote:

Menu> Setup> System> Audio / Video settings
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just after the green key to Scale (OK) acknowledge.
Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) We acknowledge with.
Menu> Setup> System> Customize section of the user's experience as an expert in changing the Green Key (OK) We acknowledge with.

Determination of the initial channel:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down options, press the OK button on your remote control set-point as the stratup service.

When you restart your device to open the channel you want.

If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.

Quote:


set as the startup service: Channel D

We can install some plugins that are not BH Panel Addons Manager add-on manager. For this purpose;

Press the green and yellow, respectively Kumandamızın BH Addons Manager and select the rear panel, we come back. Here, while the kumandamızın Addons Download Manager by pressing OK on the pop-up is in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While we want to establish a plug-in on this too, and then the OK button is pressed kumandamızın. Brief explanations about the plugin will display the info. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın on the screen, yes, press OK to carry out the installation.


Quote:

DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v5.0 Sherlock WebMedia was 5.0.

As described above, you can install the Apple Trailer v1.0 addons Mangere. This extension is not Backupta. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This causes the addons panel or the / tmp directory needs to be established.

Whenever you install plugins as external. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow and then drop-down menu, press the "Manual Install Ipk packges" on your remote control, point to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

Quote:

Turkuazpanel_0.5_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

ShowClock established. exit, press the key long-term.

Quote:

BitrateWiewer established.

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

r0_beta2 buyukbangpanel_1.1-founded.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat come first as an e-addons-manager_3.0 livefootball (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was

Emu are doing the installation:

E2_CCcam_2.3.0_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.

CCcam.cfg enter a file server

E2_Mgcamd_138_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

Mgcamd_1.37_E2_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

N, O, and key update installer we also deal with the establishment of:

Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:

Code:
ipkg update
Once installed, the update of k ey are doing.

Kurulumlarımızı our config and do the other.

If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Addons Manager> Addons Download Manager> Skins section of Black Hole E2 image can come in different skins.

Quote:

EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

Quote:

Değişrtirildi bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

Quote:

Uploaded on Eutelsat Picon Turksat set.

Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI

Full backup or usb hdd to the Main Menu BlackHole can backup device.

Quote:

Turquoise Backup Panel are taken from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

Enjoy ...





Image for the customized according to the above description for the link I give Vu + Ultimo. Who want to download and install and inspect:

After the installation can review the bookmarked links to the following:

Easy come.

Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod Official 29.01.2012 Vu+ Ultimo

Installation and initial settings::

First, download the latest version of the new image for usb installing cihazımıza: Vu + Ultimo'ya how the image is thrown from USB? (Contacts).

After the setup wizard after installing the software is encountered. At this stage, I just do the language selection. Other transactions without getting out of the wizard.
Quote:

Language Turkish is selected.

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
User Interface: yes
Use DHCP: yes

We take note of the IP address of the current settings section.

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

I need to do some adjustments in order to install Channel List.

Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
(Menu => System => Customize section) Enable the use of multi-bouquet "yes" to change. Kumandamızın green button to save the changes (OK) is pressed.

Again, we can do with the channel setting, install, and the computer for other tasks "Webinterface" plug-in needs to create.

For this
Menu => Plugins => Green Key (Attachment Download) A is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Here, under the extensions section "Webinterface" plug-in point to the OK button is pressed kumandamızın. "Extensions-Webinterface" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.

"Practice is over" key to exit kumandamızın are going to see the text.

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

Backupda Channel List TurkuazPanel 'loaded from.

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2) was added to the EPG bouquet @ galaxy2002

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Add-on (plugin) installs are doing:

We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plugin from scratch.
Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.

"Practice is over" key to exit kumandamızın are going to see the text.

Us to establish this, more add-ons management (remove more options and add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.

Quote:

İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.


Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will Changeable first attracted our attention. Add-on with setting up and removing the key from the dropdown menu will no longer red.


Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

We are under the System category "StartUpService" i, under the direction of the image "videmode" select plug-ins. With red button (back), she next to red button (Close) are going. "Add-on Management activity information" window, choose plug-in (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.



Because when we started again we set up our device with plug-in power-videomode connection settings will be related to the shape and resolution.

Quote:

DVI is selected.
1080i was chosen

Image configuration.

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed to. Green Key (OK), with the changes noted.


Quote:

Under the System category, hotplug,
PermanentClock under the System category,
PositionerSetup under the System category,
Satfinder under the System category,
Setpasswd under the System category,
VideoEnckancment under the System category,
VlcPlayer under the Software category,
Autoresolution under the category of multi-media,
MyTube under the category of multi-media,
SimpleRSS under the category of multi-media,
VirtualZap under the category of multi-media,
WeatherPlugin under the category of multi-media,
Multi-media category was established under the YouTubePlayer

Quote:

Time zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D

Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.
Code:
ipkg install / tmp / *. ipk
Quote:

Important note: Copy and paste the command can Yıkarıdaki shape. In addition, there is no need to type the name of the plugin. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.

Quote:

Turkuazpanel_0.5_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

ShowClock established. exit, press the key long-term.

Quote:

BitrateWiewer established.

Quote:

Sherlock was 5.0.

Quote:

vu_2.7.10 multiquickbutton-founded.

Quote:

Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

Quote:

enigma2-skin-hdglass16_4_18_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.

Quote:

enigma2-plugin-glasssysutil_4.07_mipsel.ipk established.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo

Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.

Emu are doing the installation:

Note: Emu glasssysutil installation is made of.

Glass in the remotes UnivCam Manager (0) key you want to install other emuları.

In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.

CCcam 2.3.0
Mgcamd 1:37 and
Mgcamd was 1:38.

CCcam 2.3.0 emu Backupda appointed as active. After pressing the Blue button to change the list of the add-on Emu Glass-UnivCam emuları Manager section, select the other active can come.

CCcam.cfg enter a file server

key establishment and key update installer we also deal with:

Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

Quote:

Değişrtirildi bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

Quote:

Picon Turksat set is loaded.

Key assignments:

 Red Short Infobar Record (Record)
 Red Long Unassigned
 Green Short browser plugin (Add-on List)
 Teal Green Long Panel
 Yellow Short Start Timeshift
 Yellow Long Unassigned
 Blue Short GlassUnivCam Manager
 Blue Long Extension Selection (Input)

Settings and add-ons installed, then take the backup:

VU + 'ta Duo & Solo USB and backup at NFI

Quote:

Turquoise Backup Panel are taken from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

Vu + image link in accordance with the above description I give customized for Ultimo. Who want to download and install and inspect:

Easy come ...

Enjoy ...

di-PZTZ.jpg

di-70V4.jpg

di-5O3X.jpg

di-Z6SW.jpg

di-9MJ8.jpg

di-6YIE.jpg

di-3UX9.jpg

di-JUA0.jpg

di-6E3I.jpg

di-R3HA.jpg

di-5F9J00EB.jpg

di-59JU.jpg




Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod Vti.0 Vu+ Ultimo
First, download the latest version of the new image for usb installing cihazımıza: Vu + Ultimo'ya how the image is thrown from USB? (Contacts).

After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.
DHCP on the network.

Where You can call this channel channel list or we can install ready.

(4) Vu + Duo channel search and bookmark create

4 different methods to throw the Channel List (Contacts).

Quote:

Backupda Channel List TurkuazPanel 'loaded from.

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(November 14, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 satellites have been added.)
@ Galaxy2002

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Menu => Add-ons section of the press came and Kumandamızın Green (Download Plug-ins) is pressed. "Plug-in information is being downloaded. Please wait ..." You will receive a message that says. On the screen after a while, "downloadable add-ons" will be listed in the categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Do you want to download any plug-in "..... When you select a plug-in? " A warning will come in the form of knowledge. Here, a "yes" is selected while still accommodating kumandamızın "OK" button to add the establishment can be downloaded. [/ B]

Quote:

Downloadable add-ons => extensions under the "bitrateviewer" was established
Downloadable add-ons => extensions under the "cccaminfo" was established.
Downloadable add-ons => extensions under the "ecasa" was established.
Downloadable add-ons => extensions under the "enhancedmoviecenter" was established.
Downloadable add-ons => extensions under the "multiquickbutton-vu" was established.
Downloadable add-ons => extensions under the "MyTube" was established.
Downloadable add-ons => extensions under the "openwebif" was established.
Downloadable add-ons => extensions under the "permanentclock" was established.
Downloadable add-ons => extensions under the "pzyemail" was established.
Downloadable add-ons => extensions under the "sherlock-vuplus" was established. Press the help key.
Downloadable add-ons => extensions under the "showclock" was established. exit, press the key long-term.
Downloadable add-ons => extensions under the "simplerss" was established. Is not active.
Downloadable add-ons => extensions under the "virtualzap" was established.
Downloadable add-ons => extensions under the "vlcplayer" was established.
Downloadable add-ons => extensions under the "weatherplugin" was established.
Downloadable add-ons => extensions under the "youtubeplayer" was established
Downloadable add-ons => systemplugins under the "positionersetup" was established.
Downloadable add-ons => systemplugins under the "Satfinder" was established.
Downloadable add-ons => systemplugins under the "setpsswd" was established. The password is assigned.
Downloadable add-ons => systemplugins under the "startupservice" was established. Channel D is set
Downloadable add-ons => cccam2.3.0 was established under the cams.
Downloadable add-ons => configirations was established under the CCcam.
Downloadable add-ons => configirations was established under the mgcamd.

I suggest you to restart your device after installing plug-ins.

Determination of the initial channel:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down options, press the OK button on your remote control set-point as the stratup service.

When you restart your device to open the channel you want.

If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.


Quote:

Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D



Whenever you install plugins as external. Ipk file via ftp / tmp directory after a workout, press the blue drop-down menu on your remote control, point the installer manually. Install ipkg option, it can point to press the OK button on your remote control.

Quote:

Turkuazpanel_0.5_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

r0_beta2 buyukbangpanel_1.1-founded.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat manager_3.0 e-addons-plugins-come first under the sport livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" was founded

Emu are doing the installation:

CCcam 2.3.0 downloadable add-ons, has been established.

Note: CCcam.cfg file path / etc dir. Here editleyebilirsiniz information about the server.

1:37 Mgcamd setup:

Mgcamd_1_37.tar.gz file download / tmp folder are sending. By pressing the blue button Kumandamızın Table nu open VTI. We press the OK button, point to the installation manual kumandamızın here. . Tar.gz download kumandamızın the OK button is pressed again, come on. In this way we do our installation.

key establishment and key update installer we also deal with:

Quote:

Hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar download the update, do k.ey.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

Quote:

Değişrtirildi bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

Quote:

Picon Turksat set is loaded.


You can try different skins according to your request: VTi-compatible interfaces


Quote:

enigma2-skin-hdglass16_4_18_mipsel.ipk established.

Key assignments:

 Red Short Infobar Record (Record)
 Red Long Unassigned
 Green Short browser plugin (Add-on List)
 Teal Green Long Panel
 Yellow Short VirtualZap
 Yellow Long Unassigned
 Blue Short VTi Panel
 Blue Long Extension Selection

Settings and add-ons installed, then take the backup:

VU + 'ta Duo & Solo USB and backup at NFI

Quote:

Turquoise Backup Panel are taken from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

If we want to upload the site by installing any Backup dosyamızı open sharing.

Vu + image link in accordance with the above description I give özelleştirlmiş for Ultimo. Who want to download and install and inspect:

Easy come.

di-NVZP.jpg

di-BWMW.jpg

di-0Z1Q.jpg

di-W9UY.jpg

di-1J93.jpg

di-2RAB.jpg

di-HLLZ.jpg

di-9LA6.jpg

di-I4N6.jpg

di-V0AS.jpg

di-XCQZ.jpg

di-WXPJ.jpg


Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod Pli (01.02.2012) Vu+ Ultimo
First of all, the latest version of the Pli Official Site of the new image to usb from the download and installing cihazımıza: Vu + Ultimo'ya how the image is thrown from USB? (Contacts).

After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings


Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.

Where You can call this channel channel list or we can install ready.

To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create

We need to establish Webinterface to install any plug-in Channel List. For this

Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you find the extensions under the category of plug-in webinterface_old kumandamızın on the OK button is pressed while.

Cihazımızı re-launching plug-in order to be effective.

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings when loading the editor need not to enter the value of the rope.)

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

Backupda Channel List TurkuazPanel 'loaded from.

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(November 14, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 satellites have been added.)
@ Galaxy2002

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed to. Green Key (OK), with the changes noted.

Quote:

Time zone: (GMT +02:00) Athens, Istanbul, Minsk

Determination of the initial channel:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down options, press the OK button on your remote control set-point as the stratup service.

When you restart your device to open the channel you want.

If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service as the startup option to stop using the drop-down options, press the OK button on your remote control point.

Quote:


set as the startup service: Channel D

Add-on (plugin) installs are doing:

Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category.

Quote:

Add-on manager;
under systemplugins Autoresolution,
under systemplugins Setpasswd (Password is assigned),
under systemplugins videoenchancement,
backupsuite under the category of extensions (8.3),
bitrateviewer under the category of extensions,
under the category of extensions cccaminfo
under the category of extensions dreamexplorer 7.3,
permanentclock under the category of extensions,
openwebif under the category of extensions,
sherlock under the category of extensions (5.1) (help press),
under the category of extensions showclock (exit, press the key long-term),
simplerss under the category of extensions (supply address has been entered),
under the category of extensions virtualzap (press and hold the OK button),
under the category of extensions vlcplayer
under the category of extensions weatherplugin
under the category of extensions youtubeplayer
established under softcams ccam 2.3.0.

Whenever you install plugins as external. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
Code:
opkg install / tmp / *. ipk
Quote:

Turkuazpanel_0.5_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

vu_2.7.10 multiquickbutton-founded.

Quote:

enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" was

Emu are doing the installation:

Emu downloadable add-ons were setup.

CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.

CCcam.cfg enter a file server

key establishment and key update installer we also deal with:

Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
Code:
Export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

If we want to install the interface as described in Attachment installations can be done.

If you wish to install downloadable add-ons, plug-in interface or external interface as described in the installation setup can do.

Quote:

pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

Quote:

Bootlogo and changed the radio fund.


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

Quote:

Uploaded on Türksat picon file ..

Key Assignments:

 Red Short Infobar Record (Record)
 Red Long Unassigned
 Green Short browser plugin (Add-on List)
 Green Long Unassigned
 Yellow Short Turquoise Panel
 Yellow Long Unassigned
 Blue Short Extension Selection
 Blue Long Unassigned

Image for the customized according to the above description is a shortcut giving Vu + Ultimo. Who want to download and install and inspect:


Enjoy ...

di-93XQ.jpg

di-70V4.jpg

di-52JB.jpg

di-PUAK.jpg

di-XTTKNPOS.jpg

di-8PCC.jpg

di-NNH4.jpg

di-TJ3D.jpg

di-D3JB.jpg

di-NN64.jpg

di-V7N7.jpg

di-MGYJ.jpg



Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod AAF 04.02.2012 Vu+ Ultimo

Installation and initial settings: we do:

First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).

Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

Quote:

Seçilidi HDMI.
1080i was chosen.
Language Turkish is selected.
DHCP on the network.

At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

Network settings: in-house.

Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

For experiencing incompatibility with this version of the image Türksat AAF channel list before loading will remedy the problem by changing the interface. The interface described later external plugin installation (attached) by the method of installation is the same.

Quote:

pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.

Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

TurkuazPanel Backupda Channel List from the installed.

Quote:

VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(January 10, 2012 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 was added to the satellites. Added satellites is outdated lists.)
@ Galaxy2002

Be sure to reboot after installing the device to the channel setting.

Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

Quote:

Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.


Quote:

Menu> Setup> System> Audio / Video settings:
Go to the content of 4:3 as follows: Just Scale
> 16: p Go to the content as follows: Just Scale
Green Key (OK) and recorded.

Quote:

Menu> Setup> System> Button Setup QuickEPG mode of appreciation against the bar as the plugin has been changed to extended.

Extension (plugin) We install:

Menu => Add-ons section to come Kumandamızın Green key (Download Plugin) are pressed. Extension information ... please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control.

Quote:

Downloadable add-ons => systemplugins under "setpasswd" (password is assigned),
Downloadable add-ons => extensions "under the cccaminfo"
Downloadable add-ons => extensions "under the dreamexplorer (7.4)",
Downloadable add-ons => extensions "under the enchancedmoviecenter (3.0)",
Downloadable add-ons => extensions "under the MyTube"
Downloadable add-ons => extensions "under the openwebif"
Downloadable add-ons => extensions "under the permanentclock"
Downloadable add-ons => extensions under the "sherlock (5.1)",
Downloadable add-ons => extensions "under the showclock"
Downloadable add-ons => extensions "under the simplerss"
Downloadable add-ons => extensions "under the subtitleplayer (3.11)"
Downloadable add-ons => extensions "under the VLCPlayer"
Downloadable add-ons => extensions "under the weatherplugin"
Downloadable add-ons => extensions "under the webmedia (5.0)",
Downloadable add-ons => softcams, under the "CCcam 2.3.0"
Downloadable add-ons => under softcams, "mgcamd 1.38" was established.

Quote:

Menu => Setup => System => Extended SYSTEMTIME Setting> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D

Want to install external plugins. Ipk file via ftp / tmp directory, throw, then give the following command, and finally to the device, simply restart telnet.
Code:
ipkg install / tmp / *. ipk
Quote:

Important note: Yıkarıdaki shape and you can copy and paste command is doing. In addition, there is no need to type the name of the plugin in. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.

Quote:

Turkuazpanel_0.5_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk

Quote:

BitrateWiewer established.

Quote:

VirtulaZap established. Long-term press the OK button.

Quote:

Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

manager_3.0 download tunisiasat-addons-founded.

After you restart the device on;

Quote:

Menu => Plugins => tunisiasat-addons-manager_3.0 e-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo

Enigma2 plugin extensions are not included in Backupda appletrailer as described above, I recommend to build 0.1 mipsel.ipk plugin download. Must have on your hdd for this extension to work. Hdd during installation are also folders. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. Ipk should be established by executing the command.

Emu are doing the installation:

Emu downloadable add-ons were setup.

Cccam.cfg file / usr / k e ys are. Here you can edit the server by entering your information.

Glass was selected as the active CCcam 2.3.0 Backupda.

K ey installer do the establishment and key updating procedures:

hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / hacksat *
We give the command.
If the installation fails again, try to give the following command:

Code:
ipkg update
After installation, update k ey are doing.

And other settings: kurulumlarımızı do.

If you wish to install downloadable add-ons, plug-in interface or external interface as described in the installation, you can setup.

Quote:

pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.

If you want link given below and radio fund bootlogo change by taking advantage of threads:

Vu + Bootlogo replacement program, use, ready bootlogolar ...

Quote:

Değişrtirildi Bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

Quote:

Picon Turksat set is loaded.

After you install the backup settings and add-ons get:

VU + 'ta get backup Duo & Solo USB and NFI

Quote:

Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

Vu + image link in accordance with the above description I give customized for Ultimo. Who want to download and install and inspect:

Good luck ...

Enjoy ...

di-C5GL.jpg

di-UHQG.jpg

di-BQJ1.jpg

di-PCRX.jpg

di-JORB.jpg

di-46GOOMTZ.jpg

di-B5A5.jpg

di-AVPP.jpg

di-JEN9.jpg

di-73NM.jpg

di-XWZD.jpg

di-KIW8.jpg




Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod BlackHole 1.7.2 Vu+ Ultimo

Installation and initial settings: we do:

First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).

Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

Quote:

Seçilidi HDMI.
1080i was chosen.
Language Turkish is selected.
DHCP on the network.

At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

Network settings: in-house.

Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

TurkuazPanel Backupda Channel List from the installed.

Quote:

VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(January 10, 2012 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 was added to the satellites. Added satellites is outdated lists.)
@ Galaxy2002

Be sure to reboot after installing the device to the channel setting.

Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

Quote:

Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.

Extension (plugin) We install:

Menu => Add-ons section to come Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog for a while after their stay at the screen a message that says the system will be a list of plugins into categories. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. Dimmer can be installed here ekelentilerdir olanalar installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

Quote:

Extension manager;
PermanentClock under the System category,
Setpasswd under the System category (The password is assigned),
StartUpService under the System category (Channel D),
VLCPlayer under the Software category,
SimpleRSS under the category of Multi-media (not active),
VirtualZap under the category of Multi-media (press and hold an arrow key),
Plugin Weatheer established under the Multi-media category.

Install (or uninstall) you want to restart after the operation istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the devices, reboot, while providing Kumandamızın.

In line with other simple settings: do we want:

Quote:

Menu> Setup> System> Audio / Video settings
Go to the content of 4:3 as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Menu> Setup> System> Customize section, change the user experience as a specialist in Green Key (OK) and acknowledge.

Initial determination of channel:

Quote:

While the point of the channel you want to begin startup the Channel List.

Press the Menu key.

Service options in the drop-down set point as stratup press the OK button on your remote control.

Channel you want your device will restart.

This means the latest on what channel you want to cancel operations kapattıysanız want to open that channel;

While the Channel List, press the Menu key.

Open the options and press OK on your remote control point to reset the startup service option.

Quote:


set as the startup service: Channel D

Panel Addons Manager can install some plugins are not GH Extension Manager. For this purpose;

Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row to come. While here kumandamızın Addons Download Manager by pressing OK on the pop-up in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While this too, we want to install add-on and then we press the OK button kumandamızın. Plugin will display information about where the short explanations. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın by pressing OK on the setup screen, yes, done.


Quote:

DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v5.0 Sherlock WebMedia was 5.0.

You can set up as described above, Apple Trailer v1.0 addons Mangere. This extension has not been Backupta. Must have on your hdd for this extension to work. Hdd during installation are also folders. Caused by addons with this panel or the / tmp directory needs to be established.

Want to install external plugins. Ipk file via ftp / tmp directory of the remote, first green, then yellow after laying the drop-down menu, press the "Manual Install Ipk packges" remotes come on "OK" button. Will want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

Quote:

Turkuazpanel_0.5_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk

Quote:

ShowClock established. Press and hold the exit button.

Quote:

BitrateWiewer established.

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

subtitleplayer_3.11 established.

Quote:

r0_beta2 buyukbangpanel_1.1-founded.

Quote:

manager_3.0 download tunisiasat-addons-founded.

After you restart the device on;

Quote:

Menu => Plugins => tunisiasat-addons-come first livefootball manager_3.0 e (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was

Emu are doing the installation:

As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.

Entering information in the file server Cccam.cfg

As E2_Mgcamd_138_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

As Mgcamd_1.37_E2_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

K ey installer do the establishment and key updating procedures:

hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / hacksat *
We give the command.
If the installation fails again, try to give the following command:

Code:
ipkg update
After installation, update k ey are doing.

And other settings: kurulumlarımızı do.

If you want to install the first green and then yellow skin and press on your remote control. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Skins Image section can come in different skin.

Quote:

EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.

If you want link given below and radio fund bootlogo change by taking advantage of threads:

Vu + Bootlogo replacement program, use, ready bootlogolar ...

Quote:

Değişrtirildi Bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

Quote:

Eutelsat set Picon Turksat loaded.

After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI

Hdd or usb device with the Main Menu BlackHole Full backup can backup.

Quote:

Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

Image for the customized according to the above description for the link I give Vu + Ultimo. Who want to download and install and inspect:

After installation examine the bookmarked links to the following:

Black Hole İmajda HDD & USB Mount Operations

Good luck.

di-PZTZ.jpg

di-70V4.jpg

di-DK78.jpg

di-O0FT.jpg

di-LJ7CWDIQ.jpg

di-YJDE.jpg

di-7S2K.jpg

di-1ZDI.jpg

di-EBBM.jpg

di-XXBK.jpg

di-KWLYUNLE.jpg

di-YB9CINC6.jpg



Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod Vti 4.1 Vu+ Ultimo

First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).

Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

Quote:

Seçilidi HDMI.
1080i selected.
Language Turkish is selected.
DHCP on the network.

At this point you can call the channel list or channel can install ready.

(4) Create the favorite channel search and Vu + Duo

With four different methods to throw the Channel List (Contacts).

Quote:

TurkuazPanel Backupda Channel List from the installed.

Quote:

VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(February 8, 2012 7 Satellite: Turksat, Hellassat, Hotbird, Astra 19.2 and Astra Eurobird9 (Sirius) 4.8) In addition, the EPG was added to the bouquet.
@ Galaxy2002

Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

Quote:

Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 °

Menu => Add-ons section to come Kumandamızın Green key (Download Plug-ins) are pressed. "Plug-in information is being downloaded. Please wait ..." You will receive a message that says. On the screen after a while, "downloadable add-ons" into categories in the system. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. We press the OK button to display the categories on the kumandamızın. Here, those who installed the system will appear in green. We want we want to install or remove plug-ins one by one by pressing the OK button to select kumandamızın point. We press the red button to return to the list of categories kumandamızın. After you have selected we want to establish or remove other kategorilerdende kumandamızın we press the yellow button. We want we want to install or remove plug-ins listed. Launching the process with the green key. We press the OK button is complete when we see the text. Saying yes to the warning of the need to re-completing başalatılamsı GUI.
Quote:

Downloadable add-ons => extensions "under the cccaminfo" was established.
Downloadable add-ons => extensions "under the ecasa" was established.
Downloadable add-ons => extensions "under the enhancedmoviecenter" was established.
Downloadable add-ons => extensions "under the infobartunerstate" was established.
Downloadable add-ons => extensions "under the multiquickbutton-vu" was established.
Downloadable add-ons => extensions "under the MyTube" was established.
Downloadable add-ons => extensions "under the permanentclock" was established.
Downloadable add-ons => extensions "under the pzyemail" was established.
Downloadable add-ons => extensions under the "sherlock-vuplus" was established. Press the help button.
Downloadable add-ons => extensions "under the showclock" was established. Press the exit key long-term.
Downloadable add-ons => extensions "under the simplerss" was established. Is not active.
Downloadable add-ons => extensions "under the VLCPlayer" was established.
Downloadable add-ons => extensions "under the weatherplugin" was established.
Downloadable add-ons => extensions "under the YouTubePlayer" was founded
Downloadable add-ons => systemplugins under "positionersetup" was established.
Downloadable add-ons => systemplugins under "Satfinder" was established.
Downloadable add-ons => systemplugins under "setpsswd" was established. The password is assigned.
Downloadable add-ons => cccam2.3.0 established under the cams.
Downloadable add-ons => mgcamd1.35 established under the cams.
Downloadable add-ons => CCcam under configirations established.
Downloadable add-ons => configirations was established under the mgcamd.

I suggest that you restart your device after installing plug-ins.


Quote:

Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk

Want to install external plugins. Ipk file via ftp / tmp directory after a workout, press the blue remote, manual pull-down menu, point to the installer. Install ipkg option and press OK on your remote control, it can point to.

Quote:

Turkuazpanel_0.6_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

subtitleplayer_3.11 established.

Quote:

r0_beta2 buyukbangpanel_1.1-founded.

Quote:

enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk

Quote:

VirtualZap established. Long-term press the OK button.

Quote:

startupservice established. set as the startup service: Channel D

Quote:

manager_3.0 download tunisiasat-addons-founded.

Quote:

enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.

After you restart the device on;

Quote:

Menu => Plugins => tunisiasat manager_3.0 e-addons-plugins-come first under the sport livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" is founded

Initial determination of channel:

Quote:

While the point of the channel you want to begin startup the Channel List.

Press the Menu key.

Service options in the drop-down set point as stratup press the OK button on your remote control.

Channel you want your device will restart.

If you want to cancel this process, ie if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Open the options and press OK on your remote control point to reset the startup service option.

Quote:

set as the startup service: Channel D

Emu are doing the installation:

Cccam 2.3.0 downloadable add-ons, has been established.

Note: CCcam.cfg file path / etc dir. Here can edit the server with the relevant information.

1:37 Mgcamd setup:

Mgcamd_1_37.tar.gz file download / tmp folder, delivered. By pressing the blue button opening nu Kumandamızın Table VTI. Here, we press the OK button kumandamızın point to the installation manual. . Tar.gz we press the OK button on Load kumandamızın come again. In this way, making our installation.

key establishment and key updating operations installer do:

Quote:

Download hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar k.ey do update.
To set up Hacksatı telnette
Code:
export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / hacksat *
We give the command.

And other settings: kurulumlarımızı do.

If you want link given below and radio fund bootlogo change by taking advantage of threads:

Vu + Bootlogo replacement program, use, ready bootlogolar ...

Quote:

Değişrtirildi Bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

Quote:

Picon Turksat set is loaded.


You can try different skins according to your choice: VTi-compatible interfaces


Picon install if you want to display vfd. Usr/share/enigma2/piconlcd picon folder via ftp and are responsible for sending the downloaded file.


Quote:

vfd_turksat.zip LCD picon file is loaded. There are a few channels piconu Most Common.

Key assignments are:

 Red Short Infobar Record (Record)
 Red Long Bitrateviewer
 Green Short Plugin Browser (Add-on List)
 Green Long Unassigned
 Yellow Short Turquoise Panel
 Yellow Long Unassigned
 Blue Short VTi Panel
 Blue Long Extension Selection

After you install the backup settings and add-ons get:

VU + 'ta get backup Duo & Solo USB and NFI

Quote:

Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

If we want to upload to the site by installing any share dosyamızı opening Backup.

Vu + image link in accordance with the above description I give özelleştirlmiş for Ultimo. Who want to download and install and inspect:

Examine the issues after the installation the following shortcuts:

Mount Operations vti İmajda

Good luck.

di-PZTZ.jpg

di-70V4.jpg

di-TSRF.jpg

di-ODPE.jpg

di-XN6I.jpg

di-7DIW.jpg

di-9L0N.jpg

di-HYLP.jpg

di-JWMK.jpg

di-NRHO.jpg

di-V74U.jpg

di-5DMWF34G.jpg



Download
 

mario sat

Registered
Messages
130
Backup_BlackHole_Solo_1.7.2_CCcam_20120206_USB

Big think s to all blackHole & VU+ team .

* add CCcam 2.2.1 & CCcam info
* Update channels liste 26e, 19e, 13e, 7w to 31/01/2012
* New boot logo
* Change fonction on remote control: ok = channels liste, esc = info, up/down change channels ...
Clique HER
 

elgeneral

Registered
Messages
7,811
Backup BH 1.7.2 Ultimo+ LSK MOD by elgeneral

Backup BH 1.7.2 D+ HD & Sky Germany (V13)

for

ultimot.png


by elgeneral



Ready setup Image for reading Cards Sky Germanys V13 and Digital+(Nagracard 1810) by Oscam6376/CCcam2.1.3


BASEIMAGE:
Blackhole 1.7.2

Backup-Image comes along with beautifull Bootlogo by me and 2 Skins installed, HD Glass by shamann & default skin!

LSK Spinners are installed and made by Aquda too!!



BOOTLOGO:

43021527.jpg



SPINNER




INSTALLED SKINS:


HD Glass by shamann & default Skin

Installed Cams:


Scam 3.60
GBox.net 804 (TNT Sat SD & HD,CW,IRD2,Nagra,Via and Seca Emu OK)
MGcamd 1.38 (CW,IRD2,Nagra,Via and Seca Emu OK)
CCcam 2.3.0 (CW,Nagra,Via and Seca Emu OK)
CCcam 2.1.3 (CW,Nagra,Via and Seca Emu OK)
OscamYmod18-T27 (TNT Sat SD & HD,CW,IRD2,Nagra,Via and Seca Emu OK)(you have to activate DVBAPI for that!!)

Sbox005-2#2
Sbox005-2#2/cccam2.1.3
Sbox005-2#2/mgcamd 1.38



Also following Combos are installed:

Oscam6376/Mgcamd 1.38 (ready setup to read both Cards,especially its needed to do AU on the D+ Card)
Oscam6376/CCcam 2.3.0 (ready setup to read both Cards)

and last but not least
Oscam6376/CCcam 2.1.3 (ready setup to read both Cards)


All Cams are installed on BH Base!!!


INSTALLED PLUGINS :


  • LSK Plugin- you will enjoy the best addons in scene, you no need more always update cams settings plugins skin and etc etc etc :Bench presss:
  • TRR Puglin
  • Airplugin

MAINCONFIGS:

SATSETTINGS: MINE (Diseqc A/B / Port A - 19,2°E; Port B - 13°E)

IP-ADRESS: 192.168.178.22
OSCAMWEBIF-PORT: 16002
OSCAMWEBIF-USER: admin
OSCAMWEBIF-PASS: oscam

CCCAMWEBIF-PORT: 16001
CCCAMWEBIF-USER: LSK
CCCAMWEBIF-PASS: LSK

LOGIN:
USER: root
PASS: LSK

ATTENTION!!!
To run the D+ Nagra Card you must have the Box and RSA-Key of this Card! Otherwise it will not work!
You have to insert them into the oscam.server File which is located at etc/tuxbox/config!


Special thanks to my friend senns69 to help me understanding the linux world, also to the authors all plugins, skins, bootlogo and more

Saludos


Download BH172-BK-LSK-MOD.zip
 

ZYGA

Banned
Messages
2,123
Image "Gotowiec" OpenPLi VuUltimo tuner designed for more for those who do less "know how" by gutosie

Image "Gotowiec" OpenPLi VuUltimo tuner designed for more for those who do less "know how" by gutosie

Put to test backup (ver.beta)
image can be updated daily from the remote control do not need to re-upload
after each update, the OpenPanel use the Script:
Restore GUI before the update image (not to be confused with factory)
we do it with the remote control: red / yellow / red
the image was removed not needed files
I recommend to install the feed (with pilota2x green)) Skin "elegato-hd-metal-transp mod Holi & Gutosie"
very fast skin

b1b08025906bbf66.jpg


1ce984cf838b61ea.jpg


very good speed and image quality set at a plasma
you install the image in flash memory because meoboot not lose much on the speed and stability
immediately after installing the following:
set up a network, time zone, configure the tuner and overdub your own list,
-download package picon, paste to / tmp and install
Download_Picon_piconlcd ****> <<<
or put (paste) on the FTP to the directory / media / usb
password in the image does not have to connect the tuner after the FTP login window and enter the root password "click", do not enter, leave blank and enter the keyboard, as already we can connect to the tuner to change the password to change the type in the console window command: passwd OPIS

7f3128c63e43e8f6.jpg


The image I installed a few plugins available are unlikely to feed the rest of the plugins you can install or remove the discretion of
bootlogo.mvi not like anyone wants it please paste to / etc/enigma2
OpenPanel:

a969df25bf62aa07.jpg


Gracias a gutosie

ps. backup to ver. test

Code:
[url=http://www.datafilehost.com/get.php?file=464e2477][b]Download [color=blue] Backup PLi Ultimo by gutosie.zip[/color][/b][/url]
 

elgeneral

Registered
Messages
7,811
VTI v4.1 BacKup Ultimo+ AllVuplus MOD by elgeneral

VTI v4.1 BacKup Ultimo+ AllVuplus MOD D+ HD & Sky DE HD (V13)

for

ultimot.png


by elgeneral

1098thumb27tku5r60e_thumb.jpg
skydeutschland5zjhmxl92f_thumb.jpg


Ready setup Image for reading Cards Sky Germanys V13 and Digital+(Nagracard 1810) by Oscam 1.00 + CCcam2.1.3 also Sbox 0.0.5.2.3 + CCam 2.1.3

BASEIMAGE:

VTI v4.1

Backup-Image comes along with beautifull Bootlogo by me and Skin installed, Nemesis Glassline by ronaldus & defaults skin

LSK Spinners are installed and made by o meu amigo Aquda

BOOTLOGO:

20647996.jpg


SPINNER:

wait1.png


PLUGINS:

  • LSK Plugin

21093058.jpg


you will enjoy the best addons in scene, you no need more always update cams settings plugins skin and etc etc etc

  • TRR Puglin

82441069.jpg


SKINS:

65908440.jpg


Nemesis Glassline by ronaldus, picons is not installed in backup you need download from LSK plugin, TRR plugin or VTI Panel

SETTINGS

Astra-Hotbird (Diseqc A/B / Port A - 19,2°E; Port B - 13°E)

Installed Cams:

96760822.jpg


Now SBox 0.0.5.2.3 + CCcam 2.1.3 work fine Sky DE HD v13 card

LOGIN:

USER: root
PASS: LSK

ATTENTION!!!
To run the D+ Nagra Card you must have the Box and RSA-Key of this Card! Otherwise it will not work!
You have to insert them into the oscam.server File which is located at etc/tuxbox/config!

Special thanks to my friend senns69 & VTI Team, also to the authors all plugins, skins, bootlogo ....


Download VTI_v_4_1_BacKup_Ultimo+_Allvpuls_MOD.rar
 

sat gr

VIP
Messages
2,382
Vu+ Ultimo Greek mod Images by sat4fun

Black Hole Greek mod Vu+ Ultimo 1.7.2 (media-tree) by sat4fun

bootlogosy.jpg


Thanks to all the authors for all the usefull plugins :

1)mcelliot_g for :

a)VME v8.0 code full Greek

b)enigma2 mo file

c)HandelGotDBol file

b)enigma2-greek-sources-crossepg

2)GSF Team for enigma2 GSF Subtitles Downloader v1.6.0(Latest v1.6.0) for OE 1.6

3)Sat Dream Gr Team for plugins:

a)newmenu_4.2 with nova program quide

b)greeknetradio

c)Foreca gr

d)and Vti panel translate

4)LinuxSK for E2 LSK Plugin

5) mfaraj57 for Tspanel

Menu :

menuugx.jpg



Plugins :

pl1a.jpg


pl2v.jpg


pl3dd.jpg


2xGreen Button = Tspanel

2xgreenbutton.jpg


Cam :



cambli.jpg



-=Download Link=-




Do not forget saving your settings from software manager before flashing any new image


Sat4fun The Satworld Together
 

fushkrujs

VIP
Messages
1,123
Turkuaz Team Mod BlackPole 0.1.1 Vu+ Ultimo

Code:
Installation and initial settings: we do:

First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).

Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

Seçilidi HDMI.
1080i selected.
Language Turkish is selected.
DHCP on the network.
At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

Network settings: in-house.

Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

TurkuazPanel Backupda Channel List from the installed.
VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(March 22, 2012 9 installed in the next 10 satellite list. EPG added bouquet. @ Galaxy2002
Be sure to reboot after installing the device to the channel setting.

Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °
Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.

Extension (plugin) We install:

Menu => Add-ons section to come Kumandamızın Green key (Download Plugin) are pressed. Extension information indiriliyor.Lütfen wait ... The system may display a message that says plugins into categories will be listed after their stay. When you press the OK button on your remote control, point to any category gelecektir.Kategorilerin in that category on the list of add-ons while you can see the contents by pressing OK. Here, too, when you press the OK button on your remote control you want to download the plug attachment point will receive a warning that you want, yes, while on the arrow button on your remote control to download and can be installed.

Downloadable add-ons section;
Autoresolution under systemplugins
setpasswd under systemplugins
videoenchancment under systemplugins
bitratewiever under extensions
permanentclock under extensions
showclock under extensions (press and hold key to exit.)
simplerss under extensions
virtualzap under extensions
VLCPlayer under extensions
YouTubePlayer under extensions
established ..
In line with other simple settings: do we want:

Menu> Setup> System> Audio / Video settings
Go to the content of 4:3 as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Initial determination of channel:

While the point of the channel you want to begin startup the Channel List.

Press the Menu key.

Service options in the drop-down set point as stratup press the OK button on your remote control.

Channel you want your device will restart.

If you want to cancel this process, ie if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service as the startup option to stop using the drop-down options, press the OK button on your remote control point.

set as the startup service: Channel D
Want to install external plugins. Ipk file via ftp / tmp directory, throw, then give the following command, and finally to the device, simply restart telnet.
Code:
opkg install / tmp / *. ipk
Important note: Yıkarıdaki shape and you can copy and paste command is doing. In addition, there is no need to type the name of the plugin in. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.
Established Turkuazpanel_0.6.3_mipsel.ipk ..
Sherlock was 5.0. (Search Press)
MyTube_PLi.tar.gz file downloaded and / tmp directory after sending Turquoise Panel> Install (ipk / tar.gz)> tar.gz file upload> TMP was set using the tar.gz file upload option
enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.
enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.
V.1.2.1 Buyukbang Panel was established. (@ Exenonline)
enigma2-plugin-extensions-subtitleplayer_3.11_mipsel.ipk established.
Netradioturk_2.6-b was
Livefootball (3.5b) was established
Emu are doing the installation:

As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Addons Manager at Black Pole (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.

Entering information in the file server Cccam.cfg

070 v4 Btkcam established manually. btkcam.cfg file / usr / k e y s are. Blink is not available. Need to add yourself.

K ey installer do the establishment and key updating procedures:

hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / hacksat *
We give the command.
If the installation fails again, try to give the following command:

Code:
opkg update
After installation, update k ey are doing.

Biss Keys loaded from the panel for the constant.cw Turquoise.

And other settings: kurulumlarımızı do.

If you want link given below and radio fund bootlogo change by taking advantage of threads:

Vu + Bootlogo replacement program, use, ready bootlogolar ...

If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

Eutelsat set Picon Turksat loaded.
After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI

Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
Image for the customized according to the above description for the link I give Vu + Ultimo. Who want to download and install and inspect:

di-CHRF.jpg

di-0JHC.jpg

di-STO1.jpg

di-GVBE.jpg

di-234M9DOW.jpg

di-ELIL.jpg

di-37O9B6H6.jpg

di-OTM91YOU.jpg

di-934H.jpg

di-NV4X.jpg

di-DQH0.jpg

di-DTHV9S8M.jpg





Download
 

fushkrujs

VIP
Messages
1,123
BlackHole 1.7.3 Backup @isayuksel Vu+ Ultimo

Code:
Installation and initial settings: we do:

First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).

Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

Seçilidi HDMI.
1080i selected.
Language Turkish is selected.
DHCP on the network.
At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

Network settings: in-house.

Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

TurkuazPanel Backupda Channel List from the installed.

VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(April 7, 2012 the 9th ranked list of 10 satellites installed. EPG added bouquet. @ Galaxy2002
Be sure to reboot after installing the device to the channel setting.

Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °
Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.

Extension (plugin) We install:

Menu => Add-ons section to come Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog for a while after their stay at the screen a message that says the system will be a list of plugins into categories. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. Dimmer can be installed here ekelentilerdir olanalar installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

Extension manager;
PermanentClock under the System category,
Setpasswd under the System category (The password is assigned),
StartUpService under the System category (Channel D),
VLCPlayer under the Software category,
SimpleRSS under the category of Multi-media (not active),
VirtualZap under the category of Multi-media (press and hold an arrow key),
Plugin Weatheer established under the Multi-media category.
Install (or uninstall) you want to restart after the operation istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the devices, reboot, while providing Kumandamızın.

In line with other simple settings: do we want:

Menu> Setup> System> Audio / Video settings
Go to the content of 4:3 as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Menu> Setup> System> Customize section, change the user experience as a specialist in Green Key (OK) and acknowledge.
Initial determination of channel:

While the point of the channel you want to begin startup the Channel List.

Press the Menu key.

Service options in the drop-down set point as stratup press the OK button on your remote control.

Channel you want your device will restart.

If you want to cancel this process, ie if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Open the options and press OK on your remote control point to reset the startup service option.

set as the startup service: Channel D
Panel Addons Manager can install some plugins are not GH Extension Manager. For this purpose;

Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row to come. While here kumandamızın Addons Download Manager by pressing OK on the pop-up in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While this too, we want to install add-on and then we press the OK button kumandamızın. Plugin will display information about where the short explanations. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın by pressing OK on the setup screen, yes, done.

Enhanced Movie Center v3.0.0, v6.0 Sherlock WebMedia was 5.0.
You can set up as described above, Apple Trailer v1.0 addons Mangere. This extension has not been Backupta. Must have on your hdd for this extension to work. Hdd during installation are also folders. Caused by addons with this panel or the / tmp directory needs to be established.

Want to install external plugins. Ipk file via ftp / tmp directory of the remote, first green, then yellow after laying the drop-down menu, press the "Manual Install Ipk packges" remotes come on "OK" button. Will want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

Established Turkuazpanel_0.6.3_mipsel.ipk ..
ShowClock established. Press and hold the exit button.
BitrateWiewer established.
subtitleplayer_3.11 established.
V.1.2.1 Buyukbang Panel was established. (@ Exenonline)
manager_3.0 download tunisiasat-addons-founded.
After you restart the device on;

Menu => Extensions => tunisiasat-come first to addons-manager_3.0 livefootball (3.6b), and then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the plugin was CCcam Info V1.3c
Emu are doing the installation:

As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.

Entering information in the file server Cccam.cfg

As E2_Mgcamd_138_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

070 v4 Btkcam established manually. btkcam.cfg file / usr / k e y s are. Blink is not available. Need to add yourself.

K ey installer do the establishment and key updating procedures:

hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / hacksat *
We give the command.
If the installation fails again, try to give the following command:

Code:
ipkg update
After installation, update k ey are doing.

And other settings: kurulumlarımızı do.

If you want to install the first green and then yellow skin and press on your remote control. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Skins Image section can come in different skin.

EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.
If you want link given below and radio fund bootlogo change by taking advantage of threads:

Vu + Bootlogo replacement program, use, ready bootlogolar ...

If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

Eutelsat set Picon Turksat loaded.
After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI

Hdd or usb device with the Main Menu BlackHole Full backup can backup.

Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
Image for the customized according to the above description for the link I give Vu + Ultimo. Who want to download and install and inspect:

isayuksel_backup_BH_1_7_3_ult

After installation examine the bookmarked links to the following:

Black Hole İmajda HDD & USB Mount Operations

Blackhole (1.7.0 +) and use the Multiboot

Vu +, this black hole with the Tuner Server Support

Good luck.

di-7O95T162.jpg

di-W1BH.jpg

di-MLWW.jpg

di-2FSUAFR8.jpg

di-BI1DI329.jpg

di-RRBY.jpg

di-L9V6IHXP.jpg

di-LVTI.jpg

di-PED1.jpg

di-YTP8.jpg

di-SK75CXHU.jpg

di-1JQ5.jpg



Download
 

ZYGA

Banned
Messages
2,123
VU+Ultimo Backup PLI Beta Gotowiec by Grubasek W zwiazku z tym ze Image Pli jakiego uzywam na ULTIMO nabral dosc pozytywnej zawartosci na dodatkach i zmianach postanowilem go udostepnic jako:[/B]
Backup Gotowiec by Grubasek (Mod). Narazie nazwe tego Backupa jako BETA

Z nowosci jakie sa zaimplementowane to:
Zmieniony Splash i Boot-Fotos zrobione przezemnie.


c3b7150db7b9f2ec.jpg
4b5076d49892e916.jpg


VTI-Panel z mozliwoscia instalacji SoftCamow i reszta zawartosci.
Szczegulnie Funkcja Backupa wybranych komponentow z Image jest bardzo przydatna.
UWAGA: plik znajdujacy sie w Katalogu pluginia VTI-Panel o nazwie packetmanager.cache czasem zostaje nadpisany co uniemozliwia instalacje SoftCamow, trzeba wtedy znajdujacy sie w tym Katalogu plik o nazwie packetmanager.cache_KOPIE wykopiowac nadac nazwe packetmanager.cache i wkopiowac spowrotem na miejsce tego wadliwego.

007e731b6a32a876.jpg


Ppanel w kturym jest dodatek mojej (podukcji) umozliwiajacy zmiane VFD-Skina, momentalnie sa cztery do wyboru z opisem zawartosci tychze, dwa dosc powarznie przezemnie zmienione, miedzy innymi z pokazaniem miesiaca i dnia Tygodnia Literowo (Alfabetycznie).

9cdb55127d5f76de.jpg
bc7063b33d2890e3.jpg


OpenPanel ktury zawiera czesc zawartosci z Panela kol. @gutosie dodatkowo z mojej reki podobny jak poprzednio wymieniony VFD-Skin Selektor, wybur tych samych VFD-Skinow.

25234fe9eeff43da.jpg


Dosc sensowne moim zdaniem Pluginy miedzy innymi:
Lcd4Linux ustawiony dla Ramki Pearl.
DVD-Backup Umozliwia Skopiowanie Plyt DVD jako ISO na HD Tunera, oczywiscie musimy miec podlaczony odtwarzacz DVD-Usb
Spiner-selektor
ShoutCast z Lista Polskich i Niemieckich Stacji Radiowych.
I wiele innych.

Ze Skurek zainstalowane sa dodatkowo HD-Glass 16 ze wszystkimi Dodatkami kture znajduja sie w Katalogu Ram jego zawartosc jest w pamieci, zawiera on tez Picony i coolPicony oraz Lcd-Picony.
Jako druga dodatkowa SimpleHD by Holi.

b2ecb891d786e3b2.jpg
f8be6bb5ab299628.jpg


Zainstalowany jest Glass-System-Utility kturego UCM, UniwersalCamManager jest jako standart dla SoftCamow, ustawiony pod Niebieskim.

a8b56ff9924615dd.jpg


Zainstalowane sa:
Cccam 213
Mgcamg 1.36
3 Oscamy w tym 5953, 6073, 6608 Konfigi z aktywnym DVB-Api
Oscam Ymod
Jesli ktos chcialby zainstalowac i uzywac SoftCamow z VTI-Panela to oczywiscie wtedy wylaczamy wszystko w UCM i uzywamy albo jednego albo drugiego.
Napewno Image to zawiera jeszcze jakies "niedorubki" z mojej strony (narazie nie mam czasu sie tym zajmowac) czesc jeszce z tego co dolozylem nie jest dobrze jesli wogule przetlumaczona na Polski, chodzi mi np. o Opisy VFD-Skinow w PPanelu itp. Jak ktos chce to moze przetlumaczyc i Niemieckiego na Polski, w Niemieckim jest to dosc dobrze przezemnie opisane.


Download Link
 

fushkrujs

VIP
Messages
1,123
Code:
Black Hole Vu + 1.7.4 Parallel Universes-memo-can backup Ultimo


PermanentClock,
Setpasswd
Channel D set StartUpService ..
VLCPlayer,
SimpleRSS
VirtualZap
Kuruld Weatheer Plugin.

panel was established emular turquoise
V3.0.0 Enhanced Movie Center,
WebMedia was v7.0.
Sherlock 5.0
42/13 The Channel turquoise panel established
Thank you to those who labor in the turquoise panel

1234567899874.png

ekranalntsrt.png

ekranalntsxf.png

ekranffffffffffuu.png

75510170.jpg

66666666666666.png

777777777777.png

1234567899874.png



Download
 

fushkrujs

VIP
Messages
1,123
Turkuaz Team Mod Black Hole Vu+ Ultimo 1.7.5 "Multiple"

Code:
Regards,
I would hesitate to give the backup file to the EPG for the problem to occur, would also say if you give it.
The backup project, Jesus (brother) I'm dedicating Yüksel, I hope you'll be among us a moment ago abi
.SETTINGS:
--------------------------------
Tuner A: 4lü Diseqc: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °Tuner B: (Advanced) Disegc 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °
Channel list: May 19, 2012 Galaxy2002
EPG added Bouquet of Turksat. Here you must add the other bouquets because they do not crush the EPG channels here.
Opening Channel: Channel D
Audio / Video:
HDMI.720p.
multi.Pillarbox.
Just Scale.
Other things are standard.
Image Enhancement:
All the standard.
Otoçözünürlük: (passive case, you can activate when you want.)
576i SD Interlace.
Progressive 576p SD.
Interlace 1080i HD.
HD 720p default.
Others are standard.
Language: Turkish.
Customize:
Record the beginning and end of an additional 5 minutes.
Use of Multi Bouquet: Yes.T
ransition between Bouquets: Yes.
Alternative Radio mode: Yes.
Information bar standby: 6 seconds.
Time Zone: Istanbul, Turkey.
Network: DHCP Off. IP: 192.168.2.33
DNS server which will: set as 8.8.8.8 and 8.8.4.4.
OLED Settings:Brightness: Latest.Hibernate: Minimum.
Interface:Own.
Information Bar: Expansion.
Support for High-Bitrate: Active.
Root password: vuplus
Hibernate Bekletmedeki Fan Status: Open.
OpenWebIf safety: Yes
Picon has been added. (Thanks Veyselcan.)
Picon VFD added.
Additives:
--------------------------------
HDMI-CEC. (Commander to control the TV.) (Kapattım.)
SimpleRSS. (RSS reader.)
VirtualZap. (What news from other channels.)
Weather. (Weather forecast.) (Kayseri, Ankara, Istanbul, Izmir has been added.) 
(Add-in to see the Mavi-hold.)
Apple Movie Trailers 0.1. (Netten video to watch.) (For film trailers.)
ARSwitch. (To change the aspect ratio of the channel and videos.) (Help key was appointed.)
LiveFootball 3.8. (Football live scores, fixtures, and for news.)
2.7.4 Multi Quickbutton. (Color keys to assign tasks, such as a shortcut.)
Permanent timeshift 1.0. (Always be open to Zamanbükücü'nün.) (Closed, open, select Menu> Setup> System> Timeshift Settings tool has to be activated.)
TS-SatEditor 2.0. (Satellite, TP to edit.)
WebMedia 7.0. (Netten video to watch.) (Multi-Source.)
D-Explorer 7.3. (Without a computer plug-in, script, run the media files, delete, copy, move, change, to.)
Transmission 2.52b1. (Torrent client.)
CCcaminfo 1.3c. (For detailed information on CCcam client-server.)
nStreamVOD 1.01. (Video On Demand, thank you, folks.)
Movie Center 3.0 enchanced Beta708 (Advanced Media Player.) (Settings were performed.)
Subtitle DDamir 3.18. (Live movie subtitle to find, set, and to show.) (Settings were performed.)
System Time 1.0rc1. (Netten time to fix.) (Menu> Setup> System> System Time'dan set.)
NetRadioTurk 2.5. (To listen to streaming 10larca netten Turkish Radio.)
Bouquet Gizleyici 0.2 rc1. (Bouquets do not want to hide.)
Pyload Infrastructure. (The net with File Servers (Hotfile, Rapidshare, Netload.in, etc, etc) to download the file.) (Hard Disk installed Green> Mavi pyload-Start the run command is sufficient.) (@ Omergorur thanks to my brother.)
Turquoise Panel 0.6.3. (No need for words, İsayüksel Thank you very much.)
BuyukBang Panel 1.2.1. (EPG for Turksat.) (Bigger Exeonline.)
SubsDownloader2 0.31. (To download Videolarımıza subtitles.)
0.5.2 Pyzemail. (E-mail to send or receive an email.)
PrayerTimes 1.0. (Prayer Times.) (Fsenes smith mercy, respectfully pay tribute.)ChartPlayer 0.8. (Online Music Playback MyVideo Top100 List.)

I did not write that image and add-ons.

EMULAR:
----------------------------------
Oscam 6929 + CCcam 2.1.3
MGCamd 1.38 (installed on the cfg file.)
6929 + MGCamd 1:38 Oscam 
CCCam 2.3.0 (/ etc / CCcam.cfg orj installed, you can modify to suit yourself.)CCcam 2.1.3
BTKCam 0.80 (installed on the cfg file.)
Scam 3.60 (installed on the cfg file.)
Oscam 6253 + CCcam 2.3.0 (installed Oscam + CCcam cfg files.)
Oscam 6921
Local encryption system is ready. (TRT1 HD Added)Änderungen rückgängig machen

01bootlogo.th.jpg














Download
 

sat gr

VIP
Messages
2,382
Black Hole Vu+ Ultimo 1.7.6 Greak mod by LSK

BlackHole-1.7.6-Vu Ultimo Greek mod by LSK

bootlogot.jpg


Extras:


LSK Plugin 2x green button

TRR Plugin

all Greek plugins [thanks to all Athors]

Cccam 2.3.0

menuvh.jpg


pl1c.jpg


pl2yz.jpg


pl3i.jpg


pl4i.jpg


lskl.jpg


trrm.jpg


camzb.jpg


infou.jpg




Download USB file



We hope you like LSK Team
 
Top