multiboot-cfe version public beta [expérimental & novice] for ET9000
Good evening This is the public beta version, intended only for Those Experienced
equipment required an internal hard Disu, one of gb usb least one cable rs232 equipment required internal hard Disu year, one of gb usb least one cable rs232
Attention first made a backup as the economy tutorial that I note in the archive first made a backup as the tutorial I Have bread in the archive
connected to the first installed your demo with RS232 cable and blocked the boot console on the document as RTF formatted your USB flash drive and flashed like and downloaded the file and unzip the flash.zip and transferred the file in flash et9000 directory, then you can plug your USB key once the demo stuck on the cfe connected to the first installed your demo with RS232 cable and blocked the boot console on the document as RTF formatted your USB flash drive and flashed the like and Downloaded and unzip the file and flash.zip Transferred the file in flash et9000 directory, then plug your USB You Can ounces the demo key stuck on the cfe
Once the flash file flashed rebooted the demo included a minimum of 2GB USB key and USB key with your paritionné "paritionneur-multiboot-cfe-et9000" Once the flash file flashed rebooted the demo included a minimum of 2GB USB key and USB key with your paritionné "paritionneur-multiboot-cfe-et9000"
to install as its for the usb to install 2GB of STIs as for the usb to 2GB
and as for the 4GB and 4GB as for ITS
Once installed multiboot-partitioned as its cfe Once installed multiboot-cfe partitioned as icts
to its low 5 to 10 for the set, once installed, restart dvbapie2 all alone and are emerging in the cfe-multiboot plugins. icts to low 5 to 10 for the set, ounces installed, restart dvbapie2 all alone and are in the Emerging cfe multiboot plugins.
to extract an image file transfers occur in rootfs.bin / hdd / image to extract an image file transfers Occur in rootfs.bin / hdd / image
to completely uninstall the NRAM download the file flashvide.zip unzip it and rename it to flash and emptied the réptoire et9000 the usb flash and transferred the file in the directory et9000, plug your USB key and the demo, and let the flash demo for 1 minute, then restart your demo and your demo returned to the original state to Completely uninstall the NRAM download the file and rename it flashvide.zip unzip it to flash and the EMPTIED réptoire et9000 the usb flash and the Transferred file in the directory et9000, plug your USB key and the demo, and let the flash demo for 1 minute, then restart your demo and your demo Returned to the original state
readme readme of version 6 of version 6
update xml menu, the menu is nothing that served it was deleted update xml menu, the menu is nothing That It Was Served deleted
update the kernel of plaice to 3.1.0, 3.0.3 kept a careful flash nandsim otherwise be unable to extract the image UBIFS update the kernel of plaice to 3.1.0, 3.0.3 Kept A Careful flash nandsim Otherwise Be Unable to extract the image UBIFS
for the tutorial or instructions see PDF files.zip rebuilt by démosat for the tutorial instructions or see PDF files.zip rebuilt by démosat
Here the correction of the nvram for those working in usb "nvram-usb.zip" nvram enabled to use well the flash file that is in the package is only for those who work with 2 usb, watch your second usb must be mounted on / hdd or / media / hdd and have 2 GB minimum, an external hard drive but it also works the same principle, for the second USB key or external drive, put it on the rear USB port and the first usb port put forward for what is recognized as sdb, once this is done, the first paritionné usb, multiboot-cfe and install, once installed the patch nvram-usb.zip in the first USB flash drive to from all installed, just install the images Here the correction of the nvram For Those working in usb "nvram-usb.zip" nvram enabled to use well the flash file That Is In The Package Is Only for Those Who work with usb 2, usb watch your second Must Be mounted on / hdd or / media / hdd and have 2 GB minimum, an external hard drive it aims Also works the Same principle, the second for the USB key or external drive, put it on the rear USB port and the USB port first put forward for What Is Recognized As sdb, oz This is done, the first paritionné usb, multiboot-cfe and install, installed the patch nvram oz-usb.zip in the first USB flash drive to from all installed, just install the image
---------------------- ----------------------
for those traveling on wheels that they not go through rs232 there was solution flash image "fold-nvram.zip" based on 2.6.18, Installed initialized image as usual and select nvram tool in the plugin , in 1 First the script will save your nvram to / media / hdd / personal-nvram and then flash the new nvram it allows multiboot, once installed reflash an image based on 3.0.3 For Those traveling on wheels That THEY rs232 not Go Through There Was solution flash image "fold-nvram.zip" based on 2.6.18, Installed initialized as usual and select image tool nvram in the plugin, the script in a First Will Save your nvram to / media / hdd / personal-nvram and then flash the new nvram multiboot allow it, installed ounces reflash an image based on 3.0.3
method to method 2 usb to usb 2
for those traveling on wheels that they not go through rs232 there was solution flash image "fold-nvram.zip" based on 2.6.18, Installed initialized image as usual and select nvram tool in the plugin but first replace the flash file located in / usr / nvram and replace it with one that is in itself package nvram-usb.zip, in 1 First the script will save your nvram to / media / hdd / nvram Personal-and then it flash the new nvram which allows multiboot, once installed reflash an image based on 3.0.3 For Those traveling on wheels That THEY not Go Through There Was rs232 solution flash image "fold-nvram.zip" based on 2.6.18, Installed image initialized as usual and select the plugin nvram tool in order first replace the flash file Located in / usr / nvram and replace it with one That Is in Itself package nvram-usb.zip, a First in the script Will save your nvram to / media / hdd / nvram Personal-and then it flash the new nvram Which allow multiboot, installed ounces reflash an image based on 3.0.3
--- ---
A tutorial for beginners has been added: tutorial for beginners tutorial for beginners et9x00.zip A has-been added: tutorial for beginners et9x00.zip
----
update version 6d
readme 6d
add kernel hdf 3.1.0 ,add kernel openvix 3.0.3
By loulou2000
multiboot-cfe-clarteck-et9000v6d.ipk
plie-nvram.zip
Good evening This is the public beta version, intended only for Those Experienced
equipment required an internal hard Disu, one of gb usb least one cable rs232 equipment required internal hard Disu year, one of gb usb least one cable rs232
Attention first made a backup as the economy tutorial that I note in the archive first made a backup as the tutorial I Have bread in the archive
connected to the first installed your demo with RS232 cable and blocked the boot console on the document as RTF formatted your USB flash drive and flashed like and downloaded the file and unzip the flash.zip and transferred the file in flash et9000 directory, then you can plug your USB key once the demo stuck on the cfe connected to the first installed your demo with RS232 cable and blocked the boot console on the document as RTF formatted your USB flash drive and flashed the like and Downloaded and unzip the file and flash.zip Transferred the file in flash et9000 directory, then plug your USB You Can ounces the demo key stuck on the cfe
Code:
flash-noheader usbdisk0: et9000/flash flash0.nvram
Code:
flash-noheader usbdisk0: et9000/flash flash0.nvramOnce the flash file flashed rebooted the demo included a minimum of 2GB USB key and USB key with your paritionné "paritionneur-multiboot-cfe-et9000" Once the flash file flashed rebooted the demo included a minimum of 2GB USB key and USB key with your paritionné "paritionneur-multiboot-cfe-et9000"
to install as its for the usb to install 2GB of STIs as for the usb to 2GB
Code:
opkg install / tmp/paritionneur-multiboot-cfe-et9000-v3-2gb.ipk
Code:
opkg install / tmp/paritionneur-multiboot-cfe-et9000-v3-2gb.ipkand as for the 4GB and 4GB as for ITS
Code:
opkg install / tmp/paritionneur-multiboot-cfe-et9000-v3-4gb.ipk
Code:
opkg install / tmp/paritionneur-multiboot-cfe-et9000-v3-4gb.ipkOnce installed multiboot-partitioned as its cfe Once installed multiboot-cfe partitioned as icts
Code:
opkg install / tmp/multiboot-cfe-clarteck-et9000v6.ipk
Code:
opkg install / tmp/multiboot-cfe-clarteck-et9000v6.ipkto its low 5 to 10 for the set, once installed, restart dvbapie2 all alone and are emerging in the cfe-multiboot plugins. icts to low 5 to 10 for the set, ounces installed, restart dvbapie2 all alone and are in the Emerging cfe multiboot plugins.
to extract an image file transfers occur in rootfs.bin / hdd / image to extract an image file transfers Occur in rootfs.bin / hdd / image
to completely uninstall the NRAM download the file flashvide.zip unzip it and rename it to flash and emptied the réptoire et9000 the usb flash and transferred the file in the directory et9000, plug your USB key and the demo, and let the flash demo for 1 minute, then restart your demo and your demo returned to the original state to Completely uninstall the NRAM download the file and rename it flashvide.zip unzip it to flash and the EMPTIED réptoire et9000 the usb flash and the Transferred file in the directory et9000, plug your USB key and the demo, and let the flash demo for 1 minute, then restart your demo and your demo Returned to the original state
readme readme of version 6 of version 6
update xml menu, the menu is nothing that served it was deleted update xml menu, the menu is nothing That It Was Served deleted
update the kernel of plaice to 3.1.0, 3.0.3 kept a careful flash nandsim otherwise be unable to extract the image UBIFS update the kernel of plaice to 3.1.0, 3.0.3 Kept A Careful flash nandsim Otherwise Be Unable to extract the image UBIFS
for the tutorial or instructions see PDF files.zip rebuilt by démosat for the tutorial instructions or see PDF files.zip rebuilt by démosat
Here the correction of the nvram for those working in usb "nvram-usb.zip" nvram enabled to use well the flash file that is in the package is only for those who work with 2 usb, watch your second usb must be mounted on / hdd or / media / hdd and have 2 GB minimum, an external hard drive but it also works the same principle, for the second USB key or external drive, put it on the rear USB port and the first usb port put forward for what is recognized as sdb, once this is done, the first paritionné usb, multiboot-cfe and install, once installed the patch nvram-usb.zip in the first USB flash drive to from all installed, just install the images Here the correction of the nvram For Those working in usb "nvram-usb.zip" nvram enabled to use well the flash file That Is In The Package Is Only for Those Who work with usb 2, usb watch your second Must Be mounted on / hdd or / media / hdd and have 2 GB minimum, an external hard drive it aims Also works the Same principle, the second for the USB key or external drive, put it on the rear USB port and the USB port first put forward for What Is Recognized As sdb, oz This is done, the first paritionné usb, multiboot-cfe and install, installed the patch nvram oz-usb.zip in the first USB flash drive to from all installed, just install the image
---------------------- ----------------------
for those traveling on wheels that they not go through rs232 there was solution flash image "fold-nvram.zip" based on 2.6.18, Installed initialized image as usual and select nvram tool in the plugin , in 1 First the script will save your nvram to / media / hdd / personal-nvram and then flash the new nvram it allows multiboot, once installed reflash an image based on 3.0.3 For Those traveling on wheels That THEY rs232 not Go Through There Was solution flash image "fold-nvram.zip" based on 2.6.18, Installed initialized as usual and select image tool nvram in the plugin, the script in a First Will Save your nvram to / media / hdd / personal-nvram and then flash the new nvram multiboot allow it, installed ounces reflash an image based on 3.0.3
method to method 2 usb to usb 2
for those traveling on wheels that they not go through rs232 there was solution flash image "fold-nvram.zip" based on 2.6.18, Installed initialized image as usual and select nvram tool in the plugin but first replace the flash file located in / usr / nvram and replace it with one that is in itself package nvram-usb.zip, in 1 First the script will save your nvram to / media / hdd / nvram Personal-and then it flash the new nvram which allows multiboot, once installed reflash an image based on 3.0.3 For Those traveling on wheels That THEY not Go Through There Was rs232 solution flash image "fold-nvram.zip" based on 2.6.18, Installed image initialized as usual and select the plugin nvram tool in order first replace the flash file Located in / usr / nvram and replace it with one That Is in Itself package nvram-usb.zip, a First in the script Will save your nvram to / media / hdd / nvram Personal-and then it flash the new nvram Which allow multiboot, installed ounces reflash an image based on 3.0.3
--- ---
A tutorial for beginners has been added: tutorial for beginners tutorial for beginners et9x00.zip A has-been added: tutorial for beginners et9x00.zip
----
update version 6d
readme 6d
add kernel hdf 3.1.0 ,add kernel openvix 3.0.3
By loulou2000
multiboot-cfe-clarteck-et9000v6d.ipk
plie-nvram.zip