AzUp tool for Azbox

[B]Change log :[/B]

** Better safety while flashing Enigma 2 and new kernel versions

** Changed a way how Enigma 2 files are transferred to a AzBox HD device 

** Possibility to install Enigma 2 on USB ( It install on same USB where patch.bin file is located, so there is no need to use 2 USB :) ), and HDD.

** Fixed problem with memory space on USB ( before approx. ~50MB was needed for extracting of Image, now is not problem )

** If You install on HDD, You can turn off Format of extended partition, and Your data on HDD will stay untouched !!!

** You can Turn OFF option copy kernel, if kernel in current version is not changed

** We suggest that KERNEL is always changed, and don't touch this when You are updating to the FIRST BETA version of Enigma 2 for AzBox.

** Added DHCP Server, which will lease IP address in same range where is IP address of Your PC, ofcourse if on Your network there is not existing DHCP Server, this will help that Your AzBox HD get valid IP Address when he is in Rescue mode.

** You can list all devices which You have on network and by that way to get which IP address is from AzBox HD.

** Find IP in LAN

** For AzBox HD Ultra, model without VFD , easiest way is to use crossover cable , so directly to connect Your PC/Laptop with AzBox Ultra HD without using LAN, and with that You will be sure that DHCP which is running with AzUP will lease IP address to Your device , and You can list it by clicking on DCHP IP ?

How to use AZUp
Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App :)))) realy funny because AZUp manage partitions of your AZUp ;)
Ignore quasi instructions and use this official instruction from the author of AZUp


We have 3 situation :
   I) You have Official FW in your AZBox andyou want to install E2
  II) You have E2 in  yourAZBox and now you want to install official FW
 III) You have E2 in your AZBox and now you want to install new/update of E2


I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


II) You have E2 in  yourAZBox and now you want to install official FW

Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)



III) You have E2 in your AZBox and now you want to install new/update of E2

Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully

*** Please use AzUP v1.2.6 to Flash this new RTi core 1.0.3 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***

 Use AzUP v2.0.1 to Flash this new RTi core 1.0.5

AZUp v.2.0.4