Dreamelite E2 webinterface not saving settings on restart

T

torres2009

Registered
Messages
44
hi, Could someone have an answer to why my webinterface settings are not saved on restart.
On my dm500hd webinterface, i changed the following:
HTTP port access to NO
Webinterface access to No

after that i pressed the green button for OK and on restarting again its going to the default settings on the webinterface. Is there some "write" access for this to work or on which file and folder are these settings so that i can ftp and change it.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
How are you restarting the 500. It could loose the settings if for instance your putting the box into standby and then turning the power off.

Set up your webinterface again and then do a soft reboot from the restart menu this will force e2 to use and save your setting so if you ever power of the 500 egain the setting should be saved.

If you still have the problem maybe try a later version of the webinterface

Ferret
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
The same principles apply to any settings changes. A soft reboot will save them.

Ferret
 
You must log in or register to reply here.
Top