ACTIVE : CANALSAT & BIS TV
- The program run without internet connection
2 - Link your computer with the receiver
3 - Click and type in (GboxCom SSSP)
4 - Port: Port 1 (if it works not change ports)
- Baud rate: 115200
- Data bits: 8
- Stop Bits: 1
- Parity: None
- Flow Control: None
5 - Press OK
6 - Click on Log
7 - After it works directly
Do not forget to activate vplug in the program
Tested by me On Ali B == Alpha
- The program run without internet connection
2 - Link your computer with the receiver
3 - Click and type in (GboxCom SSSP)
4 - Port: Port 1 (if it works not change ports)
- Baud rate: 115200
- Data bits: 8
- Stop Bits: 1
- Parity: None
- Flow Control: None
5 - Press OK
6 - Click on Log
7 - After it works directly
Do not forget to activate vplug in the program
Tested by me On Ali B == Alpha
Last edited: