oscam on nslu2

NSLU2 with on Disk2 a memory stick with the OS and on Disk1 a Smartreader.
I am using oscam version=0.99.4svn, build #2387, system=arm-nslu2-linux.

In oscam.server
[reader]
label = reader2
protocol = mouse
detect = CD
device = /dev/ttyUSB0
group = 1
emmcache = 1,3,2
caid = 0100

2010/06/15 11:45:51 1865 s reader started (pid=1869, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/06/15 11:45:51 1865 s waiting for local card init
2010/06/15 11:45:53 1869 r02 card detected
2010/06/15 11:45:57 1869 r02 ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2010/06/15 11:45:59 1869 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/06/15 11:46:00 1869 r02 card system not supported
2010/06/15 11:46:00 1869 r02 Normal mode failed, reverting to Deprecated Mode
2010/06/15 11:46:04 1869 r02 ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2010/06/15 11:46:05 1869 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/06/15 11:46:06 1869 r02 card system not supported
2010/06/15 11:46:06 1869 r02 card initializing error

With the following in oscam.server:

[reader]
label = mysmartreader
protocol = smartreader
device = 001:001
group = 1
caid = 0100
emmcache = 1,3,2

2010/06/15 11:39:08 1854 s reader started (pid=1858, device=002:001, detect=cd, mhz=357, cardmhz=357)
2010/06/15 11:39:08 1854 s waiting for local card init
2010/06/15 11:39:08 1858 r02 Smartreader device 002:001 not found
2010/06/15 11:39:08 1858 r02 Cannot open device: 002:001

I could not get the device right. (neither could I find a list-smargo for this OS).

Is there someone who could help me with this??