Pauli Neutrino Keymap für die DM7025, 500HD, 800 +8000 by romeo-golf

Pauli Neutrino Keymap V6.3 for DM7025 and DM800 by romeo-golf
powered by gutemine and AliAbdul from 29.08.2008
===============================================
Thanks to theflashor23 for the Neutrino keymap idea and basic
input and Thanks to AliAbdul for the keymap switching code
===============================================
Pauli is FREEWARE, but this means also that nobody takes
responsibility if anything goes wrong ;-)
===============================================
Version History
===============================================
[B]Version 6.3 - use enigma2 resolution for SD/HD zapping[/B]
Version 6.2 - bugfixes to prevent crashes
Version 6.1 - add SD/HD resolution switch list
Version 6.0 - add Radio startup channel
Version 5.6 - add audio delay
Version 5.5 - add Plugin List reload and PVR Play symbol patch
and artwork from Nemesis
Version 5.4 - add zapping with OK in EPG and < > in Listbox
Version 5.3 - add forgotten BACK/FORWARD, and pageUp/Down
Version 5.2 - add keymap save/restore
Version 5.1 - add more Neutrinos
Version 5.0 - Use AliAbdul's code for keymap switching
Version 4.9 - Up/Down swappable in Neutrino Mode
Version 4.8 - Page </> changeable in Listbox
Version 4.7 - Page Up/Down changeable in Listbox
Version 4.6 - Keymap switch without restart - thanks AliAbdul!
Version 4.5 - enigma2 restart optional, default Timer action
deepstandby
Version 4.4 - fix Channel on Boot bug
Version 4.3 - support Power Down short also with new images,
and add Standbyonboot
Version 4.1 - use all config.tv settings
Version 4.0 - Change Systemtime
Version 3.0 - Current Channel as Startservice
Version 2.1 - enabel/disable the Record Timer Info
Version 2.0 - toggle the Powerbutton between Standy and
Deepstandby
Version 1.0 - first version
===============================================
Der Englische Text ist unterhalb des Deutschen Text !
The English text is below the German text !
===============================================
HOW-TO
===============================================

Hallo Freunde der Neutrino-FB Tastenbelegung. Mit dem Pauli
Neutrino Keymap Plugin fuer die DM7025/800 kannst du bequem
zwischen Enigma2 und Neutrino Tastenbelegung wechseln.
Du kannst aber auch viele anderen Kleinigkeiten
damit verändern wie die Funktion des Powerschalters
tauschen oder das Aufnahme Fenster aus- bzw.einschalten.

Wieso Pauli? Pauli war ein Physiker aus Oesterreich und
gilt als der Entdecker des Neutrinos.

Neutrino Keymap (Tastenbelegung der Fernbedienung):
---------------------------------------------------------------------------

diverse Möglichkeiten die Fernbedienung seinen Gewohnheiten
anzupassen. Außer den zwei fertigen Belegungen "Enigma2" und
"Neutrino" sind noch einzelnen Anpassungen verfuegbar die aus
dem Menue leicht abzulesen sind.
===============================================

ein-/ausschalten Standby beim booten:
---------------------------------------------------------------------------

die Box startet und bleibt jedoch im Standby Modus
===============================================

ein-/ausschalten Deepstandby mit Power lang/kurz:
---------------------------------------------------------------------------

Wer seine Dreambox lieber gleich in den Tiefschlaf legt
===============================================

ein-/auschalten des Aufnahme beginnt Fenster:
---------------------------------------------------------------------------

auf besonderen Wunsch fuer die, die das Aufnahme beginnt
Info Popup nervt
===============================================

Standard Timeraktion deepstandby
---------------------------------------------------------------------------

wer moechte, dass nach einer Aufnahme standardmaessig die Box
in den Tiefschlaf geht findet hier den Menuepunkt dafuer.
===============================================

Aktueller Kanal als Startservice:
---------------------------------------------------------------------------

aktueller Sender wird als Startsender festgelegt. Interessant
fuer Uhrzeit ! Jetzt auch mit der Moeglichkeit den letzten
Radiosender als Startsender auszuwaehlen. Stichwort:
Radiowecker (z.B. in Verbindung mit dem Elektro Plugin)
===============================================

Aendern der Systemtime:
--------------------------------------------------------------------------
erlaubt die Eingabe des Datums und der Uhrzeit
===============================================

Audio Delay:
---------------------------------------------------------------------------

User die das digitale Audiosignal ueber ein Toslink Kabel zum
Verstaerker bringen klagen haeufig ueber eine nicht Lippen-
synchrone Uebertragung. Jetzt kann mit der Audio-Taste ein
erweitertes Menue aufgerufen und dort Delays/Verzoegerungen
zur manuellen Korrektur ausgewaehlt werden
===============================================

SD/HD Aufloesung:
---------------------------------------------------------------------------

Standardmaessig wird die Aufloesung im Enigma2
Menue/Einstellung/AV-Einstellung fuer alle Kanaele festgelegt
Nun waere es aber wuenschenswert fuer jeden Kanal,
insbesondere HD Sender die passende Aufloesung eingestellt
zu bekommen. Mittels Menue/Information/Kanal kann man die
benoetigten Werte (Service referenz,..) im Enigma2 ablesen.

Pauli wertet jetzt eine "*.channels" Liste aus, in welcher
a) die Service reference (sowie zu Informationszwecken
beinhaltet die Liste auch den Sendernamen) und b) ueber
den Filenamen der Liste (720p.channels oder 1080i.channels)
die dazugehoerige Aufloesung identifiziert werden. Nach
dieser Liste werden dann die Aufloesungen in der DM800
eingestellt wenn man zappt.

Diese /etc/enigma2/*.channels kann selbst editiert/ergaenzt
werden nach dem Schema welches sich aus den bereits
eingetragenen Werten leicht ablesen laesst.
===============================================

******************* !! Achtung !! ***********************

fuer Audio Delay und SD/HD Aufloesung wird die Datei
/usr/lib/enigma2/phyton/Plugin/Screens/InfoBarGenerics.py
gepatcht (angepasst)

Bei einem Softwareupdate deines Images wird diese Datei
ueberschrieben und alle Aenderungen vom Pauli darin gehen
damit verloren. Ihr muesst nachher Pauli einfach
nochmals installieren um sie wieder zurueck zu bringen.

===============================================
Und nun viel Spass mit der Pauli auf Deiner DM 7025 / DM800!
===============================================




===============================================
Here comes the English Version of the Documentation ...
===============================================
HOW-TO
===============================================

Hello, hard-core fans of the Neutrino style remote control
keys layout. With the Pauli Neutrino Keymap Plugin for the
DM 7025/800 you can easily toggle in an Enigma2 image
between the Enigma2 and the Neutrino style keys.
You can also change lots of other small things like toggle
the Standby with DeepStandby Funktion and you can disabel
or enable the Record Timer Info Popup.

Why Pauli ? Wolfgang Pauli was an Austrian physicist who
discovered the Neutrino particle.

Neutrino Keymap for the Remote control:
---------------------------------------------------------------------------

various possibilities to adapt the remote control to your
needs. Besides the 2 predefined key layouts "Enigma2" and
"Neutrino" are other minor changes possible which you can
find in the menu screen.
===============================================

Enable/Disable Standby on boot:
---------------------------------------------------------------------------

the box starts, but goes directly into standby mode
===============================================

Enable/Disable Deepstandby with Power long/short:
---------------------------------------------------------------------------

If you prefere to put your dreambox directly into deep standby
===============================================

Enable/Disable of the Record Timer Info popup:
---------------------------------------------------------------------------

on special request for the people who are annoyed by this
info popup when a timer starts a recording
===============================================

Standard Timeraction deepstandby
---------------------------------------------------------------------------

who preferes that after a recoding the box goes into
deepstandy as the default action when adding a timer here is
the possibility to change it this way.
===============================================

Current Channel as Starting Channel:
---------------------------------------------------------------------------

current Channel will become the starting channel which is
tuned on booting the box. Interesting for example to get the
current system time properly ! Now also with teh possibility
to choose the last radio channel as starting channel. So you
can use the box as a radio clock (e.g together with the
Elektro Plugin)
===============================================

Changing of System Time:
---------------------------------------------------------------------------

allows you to manually change the date and the time of the box
===============================================

Audio Delay
---------------------------------------------------------------------------

Users who use the digital audiosignal via a Toslink cable to
a an amplifier offen have complaints about non-lip-synchronity.
Now you can get by presing the audio button an extended audio
menu where you can choose some delays for manual correction.
===============================================

SD/HD resolution
---------------------------------------------------------------------------

The standard way to change the resulution is within the
enigma2 Menu/Settings/AV-Settings for all channels. It would
be great if the resolution could be set for every channel,
especially the HD ones. Via Enigma2 Menu/Information/Channel
you can ged the needed informations (Service reference,...)
out of Enigma2

Pauli now usesa "*.channels" liste from which it gets
a) the Service reference (and for information purpose it
contains also the channel name) and b) via the filename
of the liste (720p.channels or 1080i.channels) it identifies
the correct reslution. Based on this lists it then changes
the resolutions in the DM800 when you are zapping.

These /etc/enigma2/*.channels files can be edited/adapted
by yourself in the scheme which you can see from the
existing values.
===============================================

********************* !! Attention !! ********************

for adding the Audio Delay and SD/HD resolution feature the
file /usr/lib/enigma2/phyton/Plugin/Screens/InfoBarGenerics.py
is patched.

If you do a Softwareupdate of your image this file will be
over written with a new one and hence all changes that Pauli
did to it get lost. You have to re-install Pauli to get this
Patches back in this case.

===============================================
And now have fun using Pauli on your DM 7025 / 800 !
===============================================

PS: für E2 Images auf der DM7020 oder DM600 kann diese Version
ebenfalls genutzt werden.

Plugin for DM7025/800

31.08.2008

[B]Version 6.4[/B] 
- bugfixes to prevent crashes

Version 6.5 - workaround for standby on boot

[B]1) Prerequisites[/B]
Any Image should work, but the DreamboxHardware.py
is replaced, so be aware that this could cause
Troubles !

But original DreamboxHardware.py is now saved,
so ipkg remove will bring back the original state.

Power Save should be compatible to the Sleeptimers
available, but don't take this for sure !

[B]2) Installation[/B]
First copy the elektro*.ipk file from elektro*.zip
to /tmp with ftp (TCP/IP must be working already).

If you have flashed an image that offer in Blue
Pannel Manual Addon Install you can use this
functionality to install the ipk file.

If not, then install Elektro by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/elektro*.ipk

The ipkg install will also restart enigma for
you to get the Elektro Plugin shown in addons
menu. If it doesn't show up try to reboot
manually.

[B]3) Usage[/B]
In the addons menu of Elektro you can specifiy
the Time at which the box should go into
Deepstandby and the time when it should wakeup.

Currently only full hours are supported and the
default suggested time is 23h for Deepstandby
and 7h for wakeup.

Be aware that if you enable the Standby on
boot feature with Elektro, that after
wakeup/boot the box will go to Standby
- short Press of the Power Button 2x will
get it fully awake.

The Elektro Power save should be able to
handle that the box awakes properly if there
is a timer planned during the Power Save Time
(this is the reason why DreamboxHardware.py
is patched).

When you plan Timers during the Powersave
time don't forget to plan them with Standby
after Recording, or Dreambox will stay online.

If there is a timers/recording running when
Sleeptime occures the Elektro Plugin will do
a normal Standby instead of Deepstandby
to prevent harming the recording.

After this recording is finished NO delayed
Deepstandby will occure, unless you have
planned your timer with Deepstandby when
finished.

Have Fun to let Elektro Save Power and the
Environment with your Dreambox 7025 !!!!

22.09.2008

for DM7025 and DM800 

[B]New:[/B]
fix 50/60 Hz problem (hopefully) 

by romeo-golf
powered by gutemine and AliAbdul from 

Thanks to theflashor23 for the Neutrino keymap idea and basic
input and Thanks to AliAbdul for the keymap switching code

[B]Pauli Neutrino Keymap V6.8 for DM7025 and DM800 [/B]
04.10.2008

[B]New:[/B]
fix mediaPlayerActions - thanks southside

[B]Pauli Neutrino Keymap V6.10 for DM7025 and DM800 [/B]

06.10.2008

[B]Version 6.10[/B] 
- make Timer action patch more flexible -thanks weiherer

 for DM7025, DM500HD, DM800 and DM8000
by romeo-golf powered by gutemine and AliAbdul from 13.06.2010

I have to note on my DM500HD that the audio portion of the plugins in the current experimental DMM OE.16 Image to halt. Since Pauli solved various functions before on other, mostly better plugins / routines, these are now removed from the Pauli-plugin.

 so "back to the roots" ...

Pauli Neutrino Keymap V7.1 for DM7025, DM500HD, DM800 and DM8000
by romeo-golf powered by gutemine and AliAbdul from 13.06.2010

Version 7.1 - EPG Switch added: Simple-EPG or EPG Plugins 

Thx romeo-golf