Canal Digitaal with Fausto & newcamd in VU + Duo
Condition:
- A PC
- Dbox2 / Dreambox / q-box One / VU + Duo with a functioning network
- Diablo Key bin
- Fausto 1:43
Method
1st Fausto 1.43 install
2nd Fausto start
3rd Language select (Settings-Language German.sil)
---> Settings -> Language -> German.sil click -> Open
4th Fausto Emulator (Welkugel enlarge)
5th current KEYS.BIN Shop (always best to copy the root directory Fausto, they can be found quickly)
---> Tools -> Emulator -> indicate there under the tab "Monitor" the appropriate path to KEYS.BIN
5th then open under the tabs "Server" -> "Configuration" FaustoServers.cfg
The contents of this file, I've cleared and re-fed with my own data:
Example:
Go to Definition:
192.168.1.11 = IP address of the PC
6001 = one in the router shared TCP port
0622 = channel ID of C + NL
00000 = provider used by C + NL
U: dummy dummy = User & Pass indiscriminately used for server access to Fausto
7th CCcam.cfg at Dream Edit
Example:
Where the information is the same here as in the FaustoServers.cfg. The declaration of the 256 is optional. So you can bring in the newly created "virtual" card in a sharing network.
8th Launch Manager (Manager tab, press the Load, then click Start)
Among clients you can see whether you are connected, if it is not the same, just in hiss broadcasters can switch back and forth, it takes a few seconds.
Mil gracias a k98
Condition:
- A PC
- Dbox2 / Dreambox / q-box One / VU + Duo with a functioning network
- Diablo Key bin
- Fausto 1:43
Method
1st Fausto 1.43 install
2nd Fausto start
3rd Language select (Settings-Language German.sil)
---> Settings -> Language -> German.sil click -> Open
4th Fausto Emulator (Welkugel enlarge)
5th current KEYS.BIN Shop (always best to copy the root directory Fausto, they can be found quickly)
---> Tools -> Emulator -> indicate there under the tab "Monitor" the appropriate path to KEYS.BIN
5th then open under the tabs "Server" -> "Configuration" FaustoServers.cfg
The contents of this file, I've cleared and re-fed with my own data:
Example:
Code:
N: 192.168.1.11 6001 0102030405060708091011121314 0622/000000 ()
U: dummy dummyGo to Definition:
192.168.1.11 = IP address of the PC
6001 = one in the router shared TCP port
0622 = channel ID of C + NL
00000 = provider used by C + NL
U: dummy dummy = User & Pass indiscriminately used for server access to Fausto
7th CCcam.cfg at Dream Edit
Example:
Code:
N: 192.168.1.11 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256Where the information is the same here as in the FaustoServers.cfg. The declaration of the 256 is optional. So you can bring in the newly created "virtual" card in a sharing network.
8th Launch Manager (Manager tab, press the Load, then click Start)
Among clients you can see whether you are connected, if it is not the same, just in hiss broadcasters can switch back and forth, it takes a few seconds.
Mil gracias a k98