CCcam 2.1.4 trouble, some help please.

Satfun

Registered
Messages
7
Here is the deal.

I just bought a Technomate 9100S and flashing a new image (Edge Nemesis 4.4) and installing CCcam was no problem. Works fine over the network with my Dreambox 7020 so CS definitely works. I did downloaded and installed the CCam trough the blue panel so I might have installed a CCcam file meant for the Dreambox. I am not sure if it makes any real difference but I saw in the CCcam section of this site that there is also a special 2.1.4 version posted for the TM9100S.

Now here is my problem: THE EMULATOR DOESN'T WORK WITH SOFTCAM KEYS:mecry:.
I double checked, tripple checked everything but I can't make CCcam look at the SoftCam. Key file, the Autoroll file and the constant.cw file in var/keys directory. I activated the lines in the Ccamconfig but all to no avail. Does anybody have any suggestions / solutions or similar experiences. I used the same config file as on the DM7020 (just altered the OSD username and OSD password) which by the way doesn't read the keys either. So I think it is rather a CCcam settings related problem than that it has anything to do with the boxes themselves.

Please have a look at my config:

# SERVER LISTEN PORT : #
SERVER LISTEN PORT : 12000
# ALLOW TELNET INFO : #
ALLOW TELNETINFO: no
# ALLOW WEB INFO : #
ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
WEBINFO USERNAME :
# WEBINFO PASSWORD : #
WEBINFO PASSWORD :
# TELNETINFO USERNAME : #
TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME : #
ZAP OSD TIME :0
# OSD USERNAME : #
OSD USERNAME :******
# OSD PASSWORD : ******* #
OSD PASSWORD :
# OSD PORT : #
OSD PORT :80
# PHOENIX READER PATH : #
#SERIAL READER : /dev/sci1 phoenix
#SERIAL READER : /dev/sci0 phoenix
# EMM Blocker #
# SHOW TIMING : #
SHOW TIMING : yes
# DEBUG : #
DEBUG : yes
# NEWCAMD CONF : #
NEWCAMD CONF :no
# DISABLE EMM : #
DISABLE EMM : no
# EXTRA EMM LEVEL : #
EXTRA EMM LEVEL : yes
# Mini OSD #
MINI OSD : yes
# CAM KEY #
# CAMDATA #
# BOX KEY #
# BEEF ID : #
# PINCODE : #
# SOFTKEY FILE : #
SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : #
STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE : #
CAID PRIO FILE : /var/etc/CCcam.prio
# LOG WARNINGS : #
LOG WARNINGS : /tmp/warnings.txt
# #
# LOADBALANCE : #
# TRY ALL CHIDS : #
# POSTINIT : #
# DVB API : #
# #

Your help is greatly appreciated.

Cheers.
 

Satfun

Registered
Messages
7
A little intstuctions on the Telnet thing please.

Thanks for the quick response, but I am not to familiar with telnet though.
Could you give me a few hints or a page were I can find instructions on what to do? Thanks again.
 

Satfun

Registered
Messages
7
The channels I tried are Baby TV and BBC knowledge on Hotbird (13 degrees) because with GBox the emu works perfectly with just softcamkeys.
 

picodepaperis

Registered
Messages
5
File Name

I had a similar problem and I solved cheching the name of the k** file and the line in the config file: they are case-sensitive and SoftCam.K** or softcam.k** are different. Hope you can solve.
 

Satfun

Registered
Messages
7
Telnet log

@pisodep
The problem isn't the names of the caption of the K** files.
That's the first thing I checked but thanks for the input.
Rather it has something to do with the bin file is my best guess.
I did as Bellof told me and try to activate CCcam trough telnet.
When CCcam -df didn't work I checked the name in the bin file and it states CCcam_2.1.4. When I changed it to CCcam the telnet activation worked but everything else stopped even the communication with my DM7020. I changed the name back to CCcam_2.1.4 and in telnet typed in CCcam_2.1.4 -df

Now CCcam did start and I got a log of all the k**s it picked up from var/k**. @Bellof Please view the telnet log (PM'd it to you).
But still no luck. I know it has something to do with this but am not sure were the problem lies.
 

bellof

Registered
Messages
1,791
what you send me is only the starting log!
everything seems to be fine there!

try with deleting that in your cfg!

SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : #
STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE : #
CAID PRIO FILE : /var/etc/CCcam.prio

make # for every active line of that!only for testing!
 

Satfun

Registered
Messages
7
I do not quite understand your last post.
Bellof could I sent you my CCcam config? That you change what needs to be change to test it again. The starting log is all I got when I input CCcam -df. Ich Danke Ihnen nochmals für Ihre Bemühung. MFG Satfun
 

bellof

Registered
Messages
1,791
try that

# SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : #
# AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : #
# STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE : #
# CAID PRIO FILE : /var/etc/CCcam.prio

keyfiles will load automaticly without that!
 

Satfun

Registered
Messages
7
Bitte um die Auswertung meines logfiles - herzlichen Dank im Voraus!

Banging my head against the walls.
Nothing works anymore with CCcam, no network, no softcamk*ys, not even my own cardreader.
Bellof could you help me out.
I'll send you the telnet logs by pm.

Thanks again.
 
Top