Hi forum readers,
I was very lucky when I found out that NewCS now runs on ARM Coretex, this by using the QNAP binary.
I'm using a configuration that works under Windows, but whatever NewCS QNAP version I try on the OMAP it keeps freezing when you ask for the keys (either by webpage or by e.g. newcamd).
Update: V<1.66 only crashes when camd gets the keys (tried mbox and newcamd), webpage displays them correctly.
Using Smargo cardreader.
Log:
[ 19:32:35 ] [ Serial ] Write on fd 8 (len=71)
[ 19:32:35 ] [ Serial ] Read on fd 8 (len=71 timeout=2181ms)
[ 19:32:35 ] [ Serial ] Read on fd 8 (len=8 timeout=3300ms)
[ 19:32:35 ] Phoenix_read:
0000: 01 02 57 00 09 03 00 00 ..W.....
[ 19:32:35 ] [ Serial ] Read on fd 8 (len=1 timeout=3300ms)
[ 19:32:35 ] Phoenix_read:
0000: 61 a
[ 19:32:35 ] [ 0604 ] Init took: 0.989563
[ 19:32:35 ] [ Loader ] Card 0604 on port /dev/ttyUSB0 ready
[ 19:32:35 ] [ Card queue /dev/ttyUSB0 ] Starting...
[ 19:32:35 ] [ Loader ] Starting Newcamd Server on port 15050
[ 19:32:35 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 19:33:10 ] [ Newcamd ] new connection from 192.168.1.67 on socket 10
[ 19:33:10 ] [ Newcamd:15050 ] Connection from 192.168.1.67
[ 19:33:10 ] [ Newcamd ] new connection from 192.168.1.67 on socket 11
[ 19:33:10 ] [ Newcamd:15050 ] Connection from 192.168.1.67
[ 19:33:10 ] [ Newcamd:15050 ] User username1 logged in, client: Mgcamd
[ 19:33:10 ] [ Newcamd:15050 ] User username2 logged in, client: Mgcamd
[ 19:33:11 ] [ Newcamd:15050 ] Command E3 from username2 len 3
[ 19:33:11 ] [ Newcamd:15050 ] Sending Card Information to username2:
[ 19:33:11 ] [ Newcamd ] ProvID 0 Key XXXXXXX on caid 0604 type 0
<Freeze>
Have to reboot the board to recover (process can't be killed by kill).
Someone any idea how to fix this? NewCS guys -> please advice I'd like to test this (the Beagleboard is very lowpower/powerfull/cheap/popular).
Wkr,
Joep
I was very lucky when I found out that NewCS now runs on ARM Coretex, this by using the QNAP binary.
I'm using a configuration that works under Windows, but whatever NewCS QNAP version I try on the OMAP it keeps freezing when you ask for the keys (either by webpage or by e.g. newcamd).
Update: V<1.66 only crashes when camd gets the keys (tried mbox and newcamd), webpage displays them correctly.
Using Smargo cardreader.
Log:
[ 19:32:35 ] [ Serial ] Write on fd 8 (len=71)
[ 19:32:35 ] [ Serial ] Read on fd 8 (len=71 timeout=2181ms)
[ 19:32:35 ] [ Serial ] Read on fd 8 (len=8 timeout=3300ms)
[ 19:32:35 ] Phoenix_read:
0000: 01 02 57 00 09 03 00 00 ..W.....
[ 19:32:35 ] [ Serial ] Read on fd 8 (len=1 timeout=3300ms)
[ 19:32:35 ] Phoenix_read:
0000: 61 a
[ 19:32:35 ] [ 0604 ] Init took: 0.989563
[ 19:32:35 ] [ Loader ] Card 0604 on port /dev/ttyUSB0 ready
[ 19:32:35 ] [ Card queue /dev/ttyUSB0 ] Starting...
[ 19:32:35 ] [ Loader ] Starting Newcamd Server on port 15050
[ 19:32:35 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 19:33:10 ] [ Newcamd ] new connection from 192.168.1.67 on socket 10
[ 19:33:10 ] [ Newcamd:15050 ] Connection from 192.168.1.67
[ 19:33:10 ] [ Newcamd ] new connection from 192.168.1.67 on socket 11
[ 19:33:10 ] [ Newcamd:15050 ] Connection from 192.168.1.67
[ 19:33:10 ] [ Newcamd:15050 ] User username1 logged in, client: Mgcamd
[ 19:33:10 ] [ Newcamd:15050 ] User username2 logged in, client: Mgcamd
[ 19:33:11 ] [ Newcamd:15050 ] Command E3 from username2 len 3
[ 19:33:11 ] [ Newcamd:15050 ] Sending Card Information to username2:
[ 19:33:11 ] [ Newcamd ] ProvID 0 Key XXXXXXX on caid 0604 type 0
<Freeze>
Have to reboot the board to recover (process can't be killed by kill).
Someone any idea how to fix this? NewCS guys -> please advice I'd like to test this (the Beagleboard is very lowpower/powerfull/cheap/popular).
Wkr,
Joep
Last edited: