Hi I heard some saying mentioned that SRT4910 is a clone of CT5000C plus. I am wondering whether I can convert my srt4910 into CT 5000 C plus and enable my 4910 to do cardshare. My srt4910 is Australia version and just seams not compatible with the middle east version firmware. There is no a third part firmware for australia version now.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
CT 5000 C plus and SRT 4910
- Thread starter ydqcau
- Start date
Hi,
If it is really a clon you will be able to make it with spoofed firmware version.
First of all you will need to open with hex a srt firmware to get the boot device code, and then update the clarke firmware with this code.
To make it probably you have to put a "22" on the 0x10h position of the clarke-tech firmware.
You can use any hex editor.
If it is really a clon you will be able to make it with spoofed firmware version.
First of all you will need to open with hex a srt firmware to get the boot device code, and then update the clarke firmware with this code.
To make it probably you have to put a "22" on the 0x10h position of the clarke-tech firmware.
You can use any hex editor.