MPCS-ftv for CoolStream HD1

Status
Not open for further replies.

juli13

Staff member
Administrator
Messages
10,198
09.09.2009

MPCS - 1.0ftv for CoolStream - not confirmed
Here in the Annex, a version for the MPCS CoolStream.

so far not been confirmed.

If i.o. then she comes into the DB

Have fun and success during testing.
 

marce

VIP
Messages
7,115
mpcs-1.0ftv MSP cccam and Nagra3


Code:
Changelog:

cod.016
- Client-staff preliminary cccam
- Preliminary staff papers nagra3 (evaporation)
- FTV 1.4 (alpha) extends for new keys

cod.015
- The amendment to the monitor (cutting line logos)
- Changes in the log Emm (you can enter the catalog)
- Changes in the server local card

cod.014
- Fixes in the cache & reader
- EMM logs are placed in different files - separately for each reader
- Added option EMMLogs specifying directory where logs will be placed EMM
- Implemented TRANSITIONAL FTV 1.3a
- Fixes in the client FTV

cod.013
- Fixed error termination process
- Changes in the server protocols based on UDP


cod.012
- Removed group affiliation error
- Added display preference level key (L & GID)
- Added support for automatic resynchronizacji protocol error
- Remove multiple display message, the key is no longer valid


cod.011
- Fixed several bugs enlarge ... connected with double charge measurement jnym ³ ³ Å º pressure networks
- Revised ba, Ä ™ floor playing old key (sometimes for no reason pokazywaÅ, BA, Ä ... d Key
instead of information from is too old)
- A few minor amendments to newcamd and mpcs core (internal communication)
- Removed ™ ™ you next available major pojawjania in August ³ d-ow alarm


cod.010
- Totally changed inter-process communication (network sockets)
- Fixes in the kernel MPCS - should improve performance on slower machines
- Amendments to this Protocol newcamd
- Amendments to this Protocol pandora-ecm
- Added compilation for SH4 (QBoxHD) and ARM (CoolstreamHD1)
- Preparing for the introduction of color TV 1.3 and 1.4


cod.009 (second edition)
- Optional repeat requests to the readers (new option).
- Show the client's IP instead of PID (new option)
- Changes in the algorithm searches in the cache (accelerated)
- Changes in the processing engine queries
- Fixed error in handling the extended keys
- Improved detection of failed keys / password
- Added filtration duplicating ECM containers (elimination of unnecessary requests)


cod.008
- Graduating to FTV1.2 (which provides a number of new features)
- Added support for network messages (for the time being entered in the log)
- Steering delayed orders (should significantly improve liquidity image)
- Key staff of public and personal
- Improved measurement of network latency - is now done for many servers reference
- Fixed some bugs related bugs przywieszaniem August newcamd during merge some servers
- Fixed error index of orders


cod.007
- Lot of changes especially in the use of keys so we can not use the old
- Marauders asked to change the new parcels. Old no longer properly handle the new
protocol and will they lose.
- Additional stuff for holders of Dreambox (& clones) in the form of filtering requests
- Please volunteer to include options SkipSendDW = 1 in their configach reducing
amount of data through your przewalanych join together
- Natapila change website - to find a new scheme as previously


cod.006
- And yet (!) Added client DVB for Dreambox (thanks to Digital)
This is the first version but now it does not need to watch the PC or the second instance mpcs.
Wwystarczy copy everything to a directory on the Dreambox and run the script.
Must trigger setup is included with the program.
- Next amendment to the keys
- Changing the data format, timing - unfortunately be added soon will force a change posobu uploading of information
which will, with the new servers will not be compatible with old programs.
- Changed the DNS staff-ow (authentication may accelerate in the end)
- New keys on the side - remember to change it because it will eventually stop working for me!



Thx evil-3x6
 

elgeneral

Registered
Messages
7,811
MPCS - 1.0ftv for CoolStream

cod.017
- Fixes in Nagra3
- Test changes in DVB Client (API v5)
- Fixes in serial ports
- Fixes in protocol cccam
 

elgeneral

Registered
Messages
7,811
MPCS - 1.0ftv for CoolStream

09.12.09


cod.019
- The amendment in DVB Client (DVB API for DM800)
- Changes in FTV (FTV migration to 1.5)
- Fixes in core
- Build fixes in your system (versions MIPS)
 

elgeneral

Registered
Messages
7,811
ver 0.28
- Newcamd: Added client identification,
improved co-operation with a tuner error Ariva200 (arivaworkaround parameter = 1) (THX Eneen for the tests)
keepalive messages received from the client
- Improved auto-reader to find AU
- Added sending of ECM as FTV1.5 (works only with the new server)
- Changes in the core (less)
- New staff readers (with OSCam)
 

elgeneral

Registered
Messages
7,811
MPCS for CoolStream

20.02.10

ver 0.33

- Fixed error in camd35 ation problem with acceptance of some DCW
- Load balancing switches to measure the response time reader

Gracias a BestOfTheBest
 

elgeneral

Registered
Messages
7,811
mpcs-ftv_ver 0.35c

ver 0.35c

- Added filtering to the newcamd protocol uniq greater than zero
helps in cooperation with the tuners sensitive to multiple responses
eg Opticum
- Processing nagra EMM / Conax in DVB Contd. (the incomplete)
- Fix option waitforcards
- Improved option for StayDetached reader - now that StayDetached = 1
the reader being taken at all the matches correctly ECMy (the reader is not attributable to
none clientowi)
- Protocol amendment camd35 - returns not found when the ECM is incorrect
 

elgeneral

Registered
Messages
7,811
mpcs ver 0.39b

ver 0.39b


-CCcam: automatic transmission operated vers and build-in if not specified or correction / addition to the build-in version of the book unless I know the correct module
- CCcam: card added to the search entered manually CAID - adds readerow Camd3 Ident without options (the provider is set to 000000)
- CCcam: rader - added option cccMaxHop and cccReshare - to be determined how far the reader to be made available on or off it from sharing wogole cccMaxHop = 0 or cccReshare = 0
If you do not specify this parameter, subject to a value entered in the conf. CCcam server
- Improved filtering of multiple requests
 

elgeneral

Registered
Messages
7,811
mpcs-ftv_ver 0.42

20.03.10


ver 0.42
- A new filter CAID for multiple connections. Bu activate it you must type in the [global]
Filter options for the zcaem bigger than zero eg Filter = 2000 Values can be administered individually
each user, for Opticum must enter a value close to prevent any ClientTimeout
CAID with long responses
- Added option User in [DVB] - enter the cortex where the user is defined in the [account]
Allows you to configure the DVB-CAM, adding a dozwoloneych CAID, Ident and the Services may be determined
what channels are to be seen for what CAID
Jezlei this option is not there, you use the default internal user

Gracias a misqkrk
 

juli13

Staff member
Administrator
Messages
10,198
22.03.2010

mpcs-ftv_ver 0.43b

Code:
[B]ver 0.43b [/B]
- Changed the filter operation - now what odzsyla NOTFOUND kiedys 

ver 0.43A 
- CCcam - patch bugs that cause unexpected application termination errors, and the master-lock 
- Newcamd - fixes in functions referenced connection to the server. Prevent the obstruction of longer than 10 sec.
 

juli13

Staff member
Administrator
Messages
10,198
26.03.2010

mpcs-ftv_ver 0.43e


Code:
- Cccam server - code for a new experiment papers reporting 
- Core - the keel dorobnych amendments
 

juli13

Staff member
Administrator
Messages
10,198
26.04.2010

ver 0.44
- Cccam - change the connection cycle (to prevent fake DW)
- Core - further amendments in the code assigning readers
- FTV - Complete service mode
- DVB - correction ecm.info Enigma2 correctly so that it displays the data encoding and combination
- New file mpcs.srvid
 

juli13

Staff member
Administrator
Messages
10,198
27.05.2010

mpcs-ftv_v0.47k_MPP for coolstream hd1

- Autosid - works for both local papers and for readerow proxy for added autoclean
end, or draw cards
- Cccam - EMM staff
- DVB - change to Nagra EMM maintenance
 

juli13

Staff member
Administrator
Messages
10,198
mpcs-ftv_v0.48_MPP for coolstream hd1

ver 0.48

- Core - simplify internal communication
- FreeTV - elimination of repetitive Dcw updatu, adding to automatically check the condition of the network.
corrected error updatowania Dcw
 

juli13

Staff member
Administrator
Messages
10,198
mpcs-ftv_v0.48f_MPP


Code:
- Core - improving productivity, calculation error corrected time.
* Added tag to the reader when Dcw name comes from "repeat" (ECMA fallback feature.)

- Telnet - revised version (logs, permissions, information)
The user on which he can login, telnet interface must have a parameter set MonLevel = 4

- DVB - Improved selection and change of CAID for ECM "on the fly" (adapted to the new FTV)
- FreeTV - partial adjustment to the new version of the servers (fast authentication, repeated requests, service nodes)
- Readers - a new option in the [reader] - BlockEMMpat
EMM allows blocking of the given fragment.
Format: [1 byte - position counted from 0] [byte pattern] for example:

BlockEMMpat = 017082000000003B
EMMA blocks, which since 1 byte is 7082000000003B sequences (ie, a byte at position 0 is ignored)
For example, EMM-S Conax cards from the beginning of the address SA 003B

BlockEMMpat = 00840077006800
Lock all SECA EMM-S provider for 0068
 

elgeneral

Registered
Messages
7,811
mpcs-ftv 0.49b for CoolStream HD1

ver 0.49b

- Cccam - new, experimental mantalny code. Mix all the amendments (and not my my)
- Core - a few amendments in the communications and logs
 

tani1

Staff member
Super Moderator
Messages
17,767
Ver 0.49d

- Config - new parameter in the [account] ResponseDelay. Allows the addition of a short delay for the customer who requires it. Some tuners react badly when the return time is below 100ms Dcw.
- Time is given in milliseconds.
- Telnet - zmieny in the communications, the new command:
- User (ban / unban / enable / disable) - Blocks (ban, disable) or unblock (enable, unban) Selected Account
- Grep (pattern) - turns on a simple filter logs based on a text pattern
- Grepoff - disables filtering logs
- Core - code cleaning - part 2
 

tani1

Staff member
Super Moderator
Messages
17,767
Ver 0.49f
- Core - reader automatically assign to the client (reducing the load readerow - AutoReaderAssign = 1) can be activated independently of the filter options. With this option enabled Filter works as before.
A lot of testing to modify the blocking problem and the termination of the program in August because of this.
- Reader - autosid more "smart" - it should start to differentiate completely blocked channels (none of the package) from the "temporary" inability to decode.
- Cccam - changed card search engine, complemented with the communication protocol server cccam

Unofficial Options:
- Config - new parameter in the [global] checkecmlength = 0 / 1
Option to check whether the length of Ecma fits given in mpcs.guess CAID
This results in a decline pales selected ECMow eg ECM CAID 1803 the length of 0x64 (hex)
It is required to define the correct file mpcs.guess otherwise the option is turned off automatically.
Not support more than one CAID for the length (a length of Ecma CAID 1)
 

elgeneral

Registered
Messages
7,811
Mpcs-ftv v0.50

- Core - the next several additional anti-lock program
- Newcamd - supplement protocol - Linking / query / display version,
sending a communication to OSD customers who log on if it is defined.
This option is used to in section OSDMsg server [newcamd]. The use of the sample configuration file.
- Cccam - improvements in the new implementation & control Dcw
- Complemented file mpcs.srvid
- Reader - autosid also check the length of the ECM to avoid such mistakes in the case CONAX - a CAID 0B00,
ECMow several lengths: 47 and 6C
 
Status
Not open for further replies.
Top