What is it? This is a modified firmware from the official DGS, which, however, the closest alternative to the firmware to the official. When modifying the following approach: minimal invasion of the "factory" code, a minimum of additional startuemyh scripts and services, only the most necessary. From this point of view, the most famous alternative firmware (SifTeam and NLB), there are some bad things. Not going into jungle, suffice it to say that scripts run in softkamov SifTeam realized baldly, and in some places and quite wrong. In the NLB (which is not illicit initial developer, a beginner, do not seem to quite know what the), there are lots of unnecessary cumbersome, which can solve one or two teams in the Telnet. In short, the firmware 'UFM' solves the problem of minimal invasion of the receiver, while adding interesting opportunities for those who need them.
For minimalism have to pay so that you will not have a "control panel softkamom or access to the receiver on the SSH and all other" types of luxury goods "(which every year is used in the initial setup, and then hangs unnecessary goods). If you want to change skin color or reassign action buttons, you have to give a couple-three teams in the Telnet. So I just want to say to those who expect that the firmware will "steepen" the other (otherwise why would it do?): "Will not be steeper." More precisely, will be, but not for all. Because each person their ideas about how it is "cooler". This firmware - one. If you like the fact that the receiver's two (!) Web server, SSH, FTP, Telnet servers, SoftKey, software for the card reader, etc., etc., and it works by default, and at the same time - take courage LNB. If you like klatsane colored buttons in the toolbar SifTeam, and as a result you get a left foot prikruchennye scripts and iskromsannye official scripts - take SifTeam. If you need a minimum "set of gentlemen", implemented correctly, and you're not afraid to give another team-from the command line, you will here.
In UFM firmware updated just a couple of lines in the native script. Everything else is sitting and waiting in the wings (if you want to use them).
The difference from the official firmware (the language of ordinary users)
- Added sofkamy / emulators mgcamd v1.31, incubusCamd v0.90, mbox v0.6 build 10 with the opportunity to autostart one when running
- Is it possible to switch between different softkamami "on the fly" on a color button
- All configuration files softkamov is still in / var / keys (any key is not there - only the sample files)
- Added option to install alternative skins in the folder / var / skins (there is no additional skins, works correctly with this version of software)
- Added the ability to toggle between screen cyclically 4:3 / 16:9 / 14:9 for the colored button (mode is not saved when switching channels)
- Updated version of the plugin and added a plugin FavPIP Script (to run their scripts from / var / bin)
- Updated database transponders (10.08.2009) all satellites from 4W up to 40E, inclusive, plus 53E, 75E, 80E, 90E
- Updated web interface DGS to the latest version 1.3.8
- Service is disabled by default Samba (used to see the contents of receiver via Windows Sharing)
The difference from the official firmware (the language is closer to linuksoidnomu)
- Подчищена midden in the folder / var
- In / var / bin there are all the binaries softkamov: mgcamd, incubusCamd.sh4, mbox.sh40
- In / var / bin scripts are nextcam.sh and softcam for managing softkamami
- In / var / bin is a script nextzoom.sh to switch between screen
- In / var / bin / init.d script is 3.softcam.start for auto softkama at startup. See the README file there.
- In / var / etc configuration files are my.softcam (the name chosen softkama) and my.softcams (list softkamov for cyclic switching between them)
- In / var / etc is the configuration file my.skin, which contains the name of the skin of the / var / skins
- In / var / etc is the configuration file my.zooms, which contains a list of the screen to switch between the two cyclic
- In / var / etc file softcam.enabled or softcam.disabled, which affects the Softkey will run at startup or not the receiver
- In / var / etc file smb.disabled or smb.enabled, which affects the Samba service will be launched at startup or not
- Added binary tcpdump in / usr / bin - network packet sniffer, for those who need (taken from the depths of the Internet)
- Cosmetics: change UID = 502, GID = 502 in / etc / passwd and / etc / group for the user and group "relook" (all files in the receiver with ID = 502, but no such user)
- Modified the script / etc / init.d / sbox to support skin change (using the file / var / etc / my.skin) and to respond to the file / var / etc / smb. [Enabled | disabled]
- / Etc / profile was moved to / var / etc / profile by using the character links, so that you can freely edit this file
- / Usr / share / sbox / image (where the skin) diverted through the character link to the / var / skins
- / Usr / share / sbox / image / cool (from the skin DGS) is now stored in / usr / share / sbox / skins / cool, and it shows the character Link from the / var / skins / cool
After installing the firmware is already configured autostart softkama mgcamd. You will need to just put your configuration files in / var / keys, as before.
Quote
Username / password for Telnet and FTP: root / relook
Username / password for the Web interface: relook / relook
