• Discussion in the Admin room about nightly images, we dont really need or want these posting for the following reasons.

    1. We all know where to get them.
    2. Never have a change log.
    3. The changes if any are not worthy of anyone upgrading there boxes on a daily basis.
    4. They clutter the forum up.

    Posts will be removed.

    Ferret

NEXT 2000 HDTV 06.07.09 CCcam TEST Yazýlýmý(CCcam ok)

ADRESS34

Registered
Messages
1,276
NEXT 2000 HDTV 06.07.09 CCcam TEST Yazýlýmý(CCcam ok)


- Digi TV auto-update added.
- Automatic updates for Nat Geo Wild (11785 H 28000) on hold. Does not open the Menu> Entries> emu *** section with the yellow button to enter resetleyin.

- CCCamd Support has been improved.
- Test is for both software and server-based problems can be seen.

- USB PVR added.
- USB PVR function to work seamlessly with existing equipment, some operations should be done)
Need to change some of the condenser on --- Motherboard. (Actions to be described later)
--- If the motherboard is not making changes on the record during the "Record fail" error may be, in this case the error window OKleyip continue.
- To use the software after updating the HDD should be formatted necessarily.
--- The old information will be deleted. Recording format will change the old records can not follow.
Acronis software is available for --- HDD formats.
- Register to track your computer must have the appropriate codecs installed.
--- Codecs can be downloaded here: http://www.mediacodec.org/
- USB PVR function smoothly and all functions are not guaranteed work, the existing equipment is a feature added to the extras.

- Wireless home to share in Card Cas> Com Port> Off gönderim gold was added to the ZigBee.
- ZigBee (ext) rs232 connected to the wireless apparatus.
- ZigBee devices in the wireless equipment for future models will.

Some of my friends having trouble installing software with RS232 mode STBLink2.03 editor can install Boot vazýtasýyla.

Warning: Your device to be able to run more stable return to factory settings after you install any software to use and ready-to-channel file is recommended.

Is SOFTWARE TEST, ONLY TEST PURPOSE you want to use the UPLOAD.
 

MIKAME

Super VIP
Messages
5,429
New firmware for NexPro 2012HDMI

Firmware new model for NexPro 2012HDMI with emu, usb recording, managing keys, activation reading various encodings including our "cielo Italiano "


Load the file with usb memory stick by going on the menu of the decoder in the "update via usb.

Warning! Do not use more than one file. Abs in the same key!

For an easier upgrade procedure to insert a file into memory stick that is free without any folder and of course correctly decompressed. The file must have estesione. Abs

Select the mode of loading ALLCODE + Bootloader OK.

Choose start pressing Ok and wait for the end of 'upgrade.

Have fun
 
Top