Ctech 5000C+ 158p + Diablo

Hi there, Why Diablo Cam 2.3 (underworld 1.60) works fine with Ctech 2100+ (all softwares) And don't work with Ctech 5000C+ (158p? (I don't try yet an old software for Ctech 5000C+).

Thank you very mutch...

Ctech 5000C+ 158p and Diablo

I ask again if somebody have the same problem (incompatibility between Ctech 5000C+ and diablo cam Underworld 1.60).

Thank you...

Ctech 5000C+ 158p and Diablo

I will explain my problem in detail : my receiver 5000C+ can not recognize the diablo cam ; I have always this message in french (I use french language with my receiver) "Initialisation cam en cour" , it goes and reappears and in the Menu "CI" it sltill "Slot #1 or "2".

With my ctech 2100+ theire is No problem at all with my diablo cam.

Thanks a lot

The problem is solved : The receiver can't read at the same time Predator and Diablo cams. but this version 1.58p is not very stable because many time when I try to configure the decoder or edit channels, the receiver reboot...

Anyway, thanks a lot guys for your response....

Thank you "anterocouto" for your response, but I have no problem with diablo cam because it works fine with another receiver (Ctech 2100+). Now I understand that I can't use both of Diablo and Predator on Ctech 5000C+ and it's not normal.

And I think that the firmware 1.58p needs an amelioration because it's not very stable (the receiver reboots when i do some setup in the menu). so i'm waiting for the specialistes or professionnals to do something.

Thank you again and goodnight