Strong Firmware < Discussion >

Pages : 1 2 3 [4] 5 6

iron2011@fastmail.[email protected]
10-01-2011, 00:04
please can someone help me with how my srt 4669x can open infinity channels.please help me

ank_yaw
10-01-2011, 13:03
please can someone help me with how my srt 4669x can open infinity channels.please help me

Point your Dish to Astra 2B satellite[ Astra 28.2E} and using the Transponder parameters below

1) I am getting 11 Channels from Multitv { 12550V & SR:19531}
2) One GTV Channel { 12572V & SR 2854}
3) 16 Channels from Infinity {12543H & SR20800}
NB:Three channels are scrambled; SKY NEWS INT'L, INF VIVE & CEC Channel

The third channel which is NIGEZIE indicates No Audio/Video

My Set Top Box (STB) is strong 9x. I updated it with the last update for December 24 2010.

[email protected]
10-01-2011, 14:46
But some people are saying srt 4669x can unlock the 3 scrambled channels on infinity if it is update with a particular software. Can some help me

[email protected]
15-01-2011, 01:52
You may use 1 of 2 methods.

1. Copy your firmware to a USB Flash drive, plug to your receiver and go to USB Menu on the Main Menu and select Data Transfer then enter your stb file.

2. Use a serial cable to connect your Receiver to your PC. Run SRTLoader file and browse to your stb file to run it.

I hope your Receiver is not the 'imitation' type.

[email protected]
15-01-2011, 01:58
RE:DOWNGRADING PROCEDURE
You may use 1 of 2 methods.

1. Copy your firmware to a USB Flash drive, plug to your receiver and go to USB Menu on the Main Menu and select Data Transfer then enter your stb file.

2. Use a serial cable to connect your Receiver to your PC. Run SRTLoader file and browse to your stb file to run it.

I hope your Receiver is not the 'imitation' type.

@geefivez, please note that the 2methods in my earlier post is for upgrading and downgrading.

[email protected]
16-01-2011, 19:26
Please is there any software for strong mytv srt 4669x that can help it crack some channels

lezardo
17-01-2011, 18:39
i hve dish 90 cm and receiver strong srt 4900
but at the sat 28.2 no channel has received only 12 channel
all the other chanels no signal can someone help me and tell me if the dish or the lnb must be chnged?
and i'm in lebanon 10x

[email protected]
17-01-2011, 23:51
Delete all the channels and rescan.if that fails then it means you need to realign your dish

kunlebrown
21-01-2011, 12:52
There is 27 new channels on STRONG SRT 4663X decoder,pls can anyone help me on how i will do it on my decoder

ig0r
21-01-2011, 12:59
What is the atellite?
What is the package?

Give more full ask and i can give you more full answer :)

julius-femi
22-01-2011, 10:55
i upgraded 4669x for infiniti wit 502 boot version but it not stil workin i need 4.9 boot version

amgidado2001
23-01-2011, 14:16
Pls can anyone tell me the steps to use in installing the software for SRT4669X. Thanks Its opening DSTV but no sound.

[email protected]
24-01-2011, 01:56
is your receiver strong my tv?

kman7000
24-01-2011, 02:08
helpp my 4663 x is not booting

amgidado2001
24-01-2011, 02:10
[QUOTE=[email protected];738311]is your receiver strong my tv

Yes my receiver is strong myTV

[email protected]
24-01-2011, 09:26
ok. then check the strong threads and go to this thread. NEW SOFTWARE FOR STRONG MYTV. NOW DOWNLOAD THE 121P. IT IS A ZIP FILE SO OPEN it and copy the software in it onto your flash drive. insert the drive in your decoder.now go to , menu-usb- data transfer.u will see the software there, select it and press ok.
note: power MUST not go off until u finish

[email protected]
24-01-2011, 09:30
how is it not booting, did u try to upgrade it or u just woke up to see that it is not booting. explain so that u can be helped

amgidado2001
31-01-2011, 16:38
ok. then check the strong threads and go to this thread. NEW SOFTWARE FOR STRONG MYTV. NOW DOWNLOAD THE 121P. IT IS A ZIP FILE SO OPEN it and copy the software in it onto your flash drive. insert the drive in your decoder.now go to , menu-usb- data transfer.u will see the software there, select it and press ok.
note: power MUST not go off until u finish

I've done that but its not opening DSTV. I updated with 4669X of 12/1/2011. is it off?

lastdon
31-01-2011, 23:18
hw do insert emu soft in srt 4669x

[email protected]
01-02-2011, 09:44
please it solves sound problem but I dont think it opens dstv. The free dstv is off

RICH8
14-02-2011, 18:22
All.please i need a new patch for 4899x please anyone wit the patch ro if u have idie where get it please..

[email protected]
15-02-2011, 09:14
Try and google it

aliyushuaibu
15-02-2011, 12:21
please i need firmware that open jsc sport

meena
16-02-2011, 12:40
chesk the previous pages 4 download

meena
16-02-2011, 12:48
pls which vision do u update Ur receiver with it ?
4669x1/11 works with 110 perfectly ,but not all channels are opening.

rochen
18-02-2011, 14:03
hey, i search last emu firmwae for srt 7335 ci

pleas help!

simple87
20-02-2011, 10:35
my srt 4669x11 is working just d first light

akpojevighe70
22-02-2011, 12:47
I HAVE SRT 4669Z WITH ETHERNET PORT. I CONNECTED IT TO THE NET VIA THE PORT BUT THE JSC 1-9 ON HOTBIRD THE OPEN. BUT THE SYSTEM WORKS WELL WITH MY TLINK 600HD. DOES THE RECEIVER REQUIRE ANY ADDITIONAL SETTINGS OR SOFTWARE TO OPERATE THE 4669Z IDENTIFIES THE IP ADDRESS OF MY NETWORK PROVIDER VERYWELL

hafsat
24-02-2011, 20:43
I HAVE SRT 4669Z WITH ETHERNET PORT. I CONNECTED IT TO THE NET VIA THE PORT BUT THE JSC 1-9 ON HOTBIRD THE OPEN. BUT THE SYSTEM WORKS WELL WITH MY TLINK 600HD. DOES THE RECEIVER REQUIRE ANY ADDITIONAL SETTINGS OR SOFTWARE TO OPERATE THE 4669Z IDENTIFIES THE IP ADDRESS OF MY NETWORK PROVIDER VERYWELL

Yes Tlink 6000 HD, Openbox Hd,Hi-Tech Hd all come with the Free sever for Nilesat,Nssku, W4ku,for good one year, but in Strong 4669z the case is not like that.

sunati
03-03-2011, 01:25
I also need to know how to install cccam on srt4669z please help

giovi
05-03-2011, 19:57
I have a STRONG SRT 6202 receiver and i can't view ABSAT with id 020810 and 020820 on Hotbird. What can i do? Thanks

godsent
25-03-2011, 15:19
HI GUYS WHY IS THAT 4669X CANNOT PLAY BACK RECORDED FILES LIKE TS AND MPG AND 499Z HAS THE CAPABILITY TO PLAY BACK ONLY MPG FILES. THE 4663X IS VERY ROBUST AND CAN READ ALL FILR FORMAT AND PLAYBACK SAME. IS IT AN ISSUE OF SOFTWARE YHANKS

feras6
26-04-2011, 16:39
UPDATE 22 04 2011

Bulsat/Polaris (39°0E)


Will it work on Sturnq hd 4930 thanks:cool:

M_a_X
10-05-2011, 22:55
Hello all,
Can you tell me is there is a firm for str6006, that decrypt Bulsat?
thanks

Rebel J
20-05-2011, 16:55
Hello all. I'm new here. Been searching endlessly for a solution to my problem. My SRT 4663X seems to have packed up. It comes up for one second with four ---- and goes blank. How can I revive it again? Data transfer from another 4663 says it is turned off but that isn't true. Please help.

godsent
08-06-2011, 12:00
THE RAM OF YOUR 4663X IS FAULTY AND NEEDS REPLACEMENT FROM AN APPROVED STRONG MTCE OR REPAIR OUTLET. IF U ARE IN NIGERIA PLEASE CALL ME ON 08034958688

francesco
08-06-2011, 12:20
@godsend
ok.. but there is no need for you to shout!

macao100
13-06-2011, 20:44
hello
witch model i need to have NSS7
Thank you

olablessing
26-06-2011, 16:05
all those software is for spilliting 3strong receiver with r232 cable

tantony
30-06-2011, 20:01
please i need software for my strong srt4669z to enable my 8281 please help

[email protected]
30-06-2011, 23:00
please i need software for my strong srt4669z to enable my 8281 please help

pm me and lets talk

bamboutos
01-07-2011, 11:47
Hi @ all!
Is it possible to record TS file on SRT4910? If yes then how?

Regards

stephan1970
15-07-2011, 21:51
Need EMu Firmware for SRT6201

sipione
17-07-2011, 10:23
Good day to you all
Any hope to get patch for srt 4930 HD to work with TvSat Card. (Italian bouquet)
As the srt 4663x do as from the patch143p_20100409 > up (Patch Software Support Canal + NL on ASTRA & VIASAT on Sirus)
Unfortunately Strong is the only HD receiver that is found here in West Africa.
Thanks in advance

Predator45
19-07-2011, 11:03
possible to use the strong Card Sharing?
if so what model and what software

OLAREVO
20-07-2011, 05:48
possible to use the strong Card Sharing?
if so what model and what software

pls. go to chat section to ask any question. thanks

tojewax
03-08-2011, 21:56
Sory, I know that this has been answered 2 years ago, but is there still not possible to patch Strong srt 6015?
I know that there is patch for srt 6016, but probably is not good since is not his clone. One other very similar is Strong srt6020.
Strong srt6015:
Max. 3200 channel memory capacity for 64 satellites
System and Memory:
Flash Memory: 16 Mbits
SDRAM: 64 Mbits
Strong srt6020:
Max. 4.800 channel memory capacity for 64 satellites
System and Memory:
Flash Memory: 16 Mbits
SDRAM: 64 Mbits
Since they have the same memory (difference is that srt6020 have SD Card reader) is possible to install firmware from srt6020 to srt6015 and then patch it?(since there is patch for srt6020)

Warriort
04-08-2011, 04:59
hi, i have a strong 4661x and can`t see all chanels.
update whit diferent patchs but doesn`t work.
appear "scrable chanel".

if someone can helpe me... thks

garbai
04-08-2011, 15:53
hi, i have a strong 4661x and can`t see all chanels.
update whit diferent patchs but doesn`t work.
appear "scrable chanel".

if someone can helpe me... thks

Say the channels that you are unable to watch and on which satellite.
Strong 4661x is not mpe4 of HD compliant and as such if the channels you are hoping to watch are transmitting in any of the stated video format then you can't watch those channels. Hope the information helps.

newton
12-08-2011, 22:54
hello gurus in da house,
plz i need software for str 4669x and 4651x receivers
thks

turbodot2k
15-08-2011, 09:40
the recall list in 245p for 4900HD doesn't work properly
when choosing a previously viewed channel on a
different satellite. back to 244p.

ekonibaje
18-08-2011, 08:05
All major ssn.supersport are nt workg  strong decoder.wat are d remedy.

hoha
20-08-2011, 16:56
halla at me lets talk

bounju
22-08-2011, 14:39
The supersport 10 is working but pls anybody wit any solution yet....cause i have tried everything i could.

jamine
23-08-2011, 00:52
quelles sont les améliorations que apporte les mis à jours des firm

uzoya01
23-08-2011, 12:23
I really want to thanks those who have put more efforts to make this site alive, for people like me, the site has been really helpful...............

uzoya01
23-08-2011, 12:29
Ss3n, Ss7n,etc All Gone On Strong decoder With Subscription on ur account with dstv... pls so many people need help

Bawasani
23-08-2011, 12:38
Ss3n, Ss7n,etc All Gone On Strong decoder With Subscription on ur account with dstv... pls so many people need help

Pls can you say exactly what you want.

uzoya01
23-08-2011, 12:53
I have strong decoder 4669xii and am using a dstv smart card with a premium banquet the Ss3n, Ss7n,etc All Gone On Strong decoder, haven't try to upgrade the decoder with the latest software still not working. the Ss3n, Ss5n, Ss7n, scrambled. i need help pls

komez
24-08-2011, 13:59
I ve a strong 4663x receiver,i upgraded to 166p in july.right now i cant upgrade it to 168p/167p,when i insert d flash drive on d receiver i dont c d saved .stb file infact it doesnt show d stb file.pls wat do i do coz i want 2 upgrade 2 d latest version

kobbyrein
03-09-2011, 02:18
STRONG SOFTWARE FOR DSTV SMART CARD RELEASED

isfat
03-09-2011, 22:51
GUYS USE NEW SOFTWARE 4661X-4663X-4664X VERSION 124 AU RELEASE ON 28-8-2011. TRY IT 100% IS WORKING

ekonibaje
04-09-2011, 08:54
Av never Ơ̴̴̴̴͡.̮Ơ̴͡ au 124...pls give us d link..wat is available is au123.

Bentanko
06-09-2011, 10:23
GUYS USE NEW SOFTWARE 4661X-4663X-4664X VERSION 124 AU RELEASE ON 28-8-2011. TRY IT 100% IS WORKING

Pls. can u provide the link for this software ?

bozomustafa_68
06-09-2011, 10:59
Pls. can u provide the link for this software ?

here australia 123

http://www.sat-universe.com/showthread.php?p=823760#post823760

here 124

*Software_Softwares_Middle East & Africa

*Version:124 - 14.07.2011

daysat2free
06-09-2011, 15:19
Pls how do i get the new A u for 4669x

daysat2free
06-09-2011, 15:24
Pls am in need of it am a new member pls...

bozomustafa_68
06-09-2011, 15:31
Pls how do i get the new A u for 4669x

hi


Currently Not available australia...:cool:

daysat2free
06-09-2011, 18:08
Pls i tried A U for 4663x but is not workin with dstv smart card v.5.,but is wokin v.2

osemann
06-09-2011, 18:47
Pls i tried A U for 4663x but is not workin with dstv smart card v.5.,but is wokin v.2

Same problem here. I have a 4663x with DSTV version 5 card and so far nothing seems to work. Can any one help please.

primsattv
06-09-2011, 20:27
Goodevening all,pls can anyone give me a working software for4669XII,4663x strong machine that can play Dstv smartcard.

darexworld
07-09-2011, 09:12
plz i need the link that i can easily download latest software to my 4663x and 4669x in other to work for dstv smart card

oramaster
08-09-2011, 09:33
please is there a new software to open DSTV paid card?

darexworld
08-09-2011, 11:47
plz where cab i upgrade mysrt4663x and 4669x

Akokoba
10-09-2011, 09:28
Der All,
I am new to this forum and sattelite technology in general.
I have a strong technologies set up as follows:

Receiver:

Model: SRT 4669Z
S/W Version: 1.07p (Apr 14 2011)
H/W Version : 1.00
Boot Version : 5.00
CH Version : MAR 03 2011

And a strong FTA 99X DONGLE.

I used to have the DSTV full bouquet but I have not been able to watch thesd channels as they have been scrambled. What do I do to unscramble these channels.
Any help will be high appreciated.
Thanks.

Bawasani
10-09-2011, 13:53
Der All,
I am new to this forum and sattelite technology in general.
I have a strong technologies set up as follows:

Receiver:

Model: SRT 4669Z
S/W Version: 1.07p (Apr 14 2011)
H/W Version : 1.00
Boot Version : 5.00
CH Version : MAR 03 2011

And a strong FTA 99X DONGLE.

I used to have the DSTV full bouquet but I have not been able to watch thesd channels as they have been scrambled. What do I do to unscramble these channels.
Any help will be high appreciated.
Thanks.

DSTV is protecting its market and as such blocked cards that are not officially release from them. Also remember this is an educational forum not a place for hacking paid channels.

satwatche
10-09-2011, 22:24
pls i need software for old dstv smartcard on strong[for supersport to work.]

mikeobitsat
11-09-2011, 05:33
if you are in need of the dstv software for mat cards call me on 08032501913.

meena
12-09-2011, 19:16
sir we paid for our smart card and still we are unable to view their services. with the valid smart card.becouse we are using strong box .

oramaster
14-09-2011, 22:49
http://wizkid.persiangig.com/Strong%20Patch%20Software/SRT4620XII_4661X_4664X_169p_20110901.zip
Try this all dstv user.

I already tried this, it did not work for dstv smart card

oramaster
14-09-2011, 22:53
here australia 123

http://www.sat-universe.com/showthread.php?p=823760#post823760

here 124

*Software_Softwares_Middle East & Africa

*Version:124 - 14.07.2011

I tired these, and they worked quite fine but the only shortfall is that you're not allowed to share using rs232 sharing

Kinmen2004
14-09-2011, 23:49
i need the software 1.22p for srt 4663x.

coolsegun
28-09-2011, 00:31
Please can this software update open super sport?

Bawasani
28-09-2011, 09:34
Please can this software update open super sport?

No. you need an official DSTV card.

mohammed tanko
28-09-2011, 12:05
No. you need an official DSTV card.
as stated, New Software Support DSTV & Canal Sat Official Smart Card

easycom
11-10-2011, 12:06
Hello, i just finish using the srt 171p software but is not sharing with Dstv.... help pls

godsent
12-10-2011, 19:25
Memebers srt 4663x 172p has a defect when using the rs 232 system. It works on the same same station both on the master and the slave receivers. srt 4669x is still sleeping with dstv cards while 4669x11 is not confirmed perfect as srt 4663x which is 100% okay with dstv cards but not for sharing now till the system software is updated . thanks guys for the interest

pitodenz1
16-10-2011, 13:50
use 4669x as master

pitodenz1
16-10-2011, 13:52
lets wait for a new software release

asensoelect
19-10-2011, 02:57
Is there any hope for srt4899x? May som1 have a way of bringing it alive.

ss5020
19-10-2011, 03:40
please help to guide me on how to use dstv smart card on strong receiver 4669xII

abu nature
19-10-2011, 15:28
http://www.sat-universe.com/showthread.php?t=105973&page=6

tantony
20-10-2011, 00:51
I tired these, and they worked quite fine but the only shortfall is that you're not allowed to share using rs232 sharing

upgrade your receiver with the latest update and use 4669x/4669xii/4669z as master and slave 4663x it will share properly.i tried three ways and its working fin

akpojevighe70
20-10-2011, 12:02
upgrade your receiver with the latest update and use 4669x/4669xii/4669z as master and slave 4663x it will share properly.i tried three ways and its working fin
please confirm if the 4669x11 will slave the srt 4663x receiver using the 3 way cords

akpojevighe70
20-10-2011, 12:04
please guys where can i get the software for srt 4669x for dstv cards mine is sleeping and my valid subscription is ruuning

tantony
21-10-2011, 05:07
please confirm if the 4669x11 will slave the srt 4663x receiver using the 3 way cords
srt4669xii master and srt4663x slave 3ways confirm working OK

mocosh
29-10-2011, 16:43
SRT 4663X not sharing to the same model SRT 4663X, any new update for that please?

oramaster
01-11-2011, 16:47
SRT 4663X not sharing to the same model SRT 4663X, any new update for that please?

Get a SRT4669XII decoder to share with

oramaster
01-11-2011, 16:50
please guys where can i get the software for srt 4669x for dstv cards mine is sleeping and my valid subscription is ruuning
check out dstv upgrade for SRT4669XII on http://www.sat-universe.com/showthread.php?t=105973&page=6

oramaster
01-11-2011, 16:52
please help to guide me on how to use dstv smart card on strong receiver 4669xII
upgrade your decoder to the latest upgrade file. you can get it on http://www.sat-universe.com/showthread.php?t=105973&page=6

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum