Latest firmware for Openbox

All old Softwares you are can find here:
http://www.sat-universe.com/showthread.php?t=122019

In this topic last or good SW...

Correct problem with Vi@s@t package (double ident)

Tested SoftWare for 770 modele with Dre-Crypt without module... only cardslot

Openbox share modifided v 1.1.0.0(English version)

Software 5.46 from 17.11.2008

bugfixes sharinga package Orion (PROV. ID 0602)

to locate bug in the software fills dumped in the factory settings option of video, audio, menu language ..

to reactivate EMU needed after casting software 5.46 on / off. it (the menu - 1117 EMU off / on)

P.S. if you dont use package Orion (80*East) no use this Software

New Software v1.17.32 - 300109

1. The activation of new cards NTV + (IDENT 023700 serial 032488 **)
2. The extension of the rights of subscription for the next month.
3. Activation of the right to "Kinodrom"
4. Fixed receiver package Digi TV (Thor 0.8E, no AU)
5. A new feature in the recording of events - an opportunity to set the delay (1-5, 10, 15 minutes) before the record and off-time receiver to complete the event on time provider ...
6. Added new option in the installation options, operational records, push the button "Rec" - an opportunity to set the record upon completion of the interruption of the "current events" or "the next event ...
7. The menu timers added to the calendar.



If your reciever are not original not update this soft!!! can be problem

The same points 1 - 7 from latest Version + fixed

Addition to point 6. .... if there is EPG on channel

8. Menu> Settings> Search Channels> Time Calibration (Off, Simple, Full)

PS: Before update the software do not forget to save the settings!

If your reciever are not original not update this soft!!! can be problem

OpenBox X800,Õ820 5.47 fix DiGi TV(No AU):thum:

OpenBox Õ810 5.47 fix DiGi TV(No AU):thum:

OPENBOX Õ730,Õ750,X770,Õ790
v 1.17.47


K@rdsharing- Improved stability
(added official support. kards RAduga TV-75* in the slot)

Openbox F-300 tu X-800-5.46 sw

Openbox_X-810 Firmware 5.47 New Software

This firmware for openbox x-810 is a modified software, the basis used for firmware 5.46 Openbox H800,h810, H820 without AC for DIGI TV 1W, in the rest of the software / Firmware / same firmware version 5.46
localization bug in the process of filling software reset factory settings option in the video, audio, menu languages ...
for re-activation of EMU must be after filling software 5.47 on / off. it (The menu - 1117 EMU off/on) it (the menu - 1117 EMU off / on).

27.05.2009


v 1.17.63


description of software v 1.17.63 dated 26 May 2009.

Assigning ID encoding a particular channel, a new feature Submit ID on the list of K @ S. ..

a) In the new version of software. added bind ID to the channel ... How does this function:

1 - to start you need to add the channel to which you want to assign the CAID / PROV ID
2 - entry in the menu K @ W the same menu-8282-"blue" button (now the menu is called IDENT)
3 - in the menu K @ W, click on "yellow" button in the window, select the correct CAID / PROV ID and then click "OK" (Channel ID will have to enter manually, or to correct 00 00 00 which gives the receiver).
4 - get out of the emulator menu "Exit"
5 - when the channel press and hold 2-3 seconds, click "Exit"
6 - in the window select the desired ID and zhmete "OK" (the window will show only those ID that you previously chose in the menu ID "yellow button").
7 - all the channels with the same CAID / PROV ID can bind not going to emu K @ V (see para 5-6)

Attention! depending on the number of identity and diversity coding systems to bind the channels, the time of attachment may be from 1 to 15 seconds, do not rush!

- If the channel does not open after attachment, you can enable the receiver to pick his own, for which:
- Press and hold 2-3 seconds, click "exit"
- In winning the window choose No and click OK.

in the new software is still a normal K @ W + Syfra provider needed emu on the menu to add a new slot SECA (0100) PROV 00000068

b) to the numerous requests back to its former status indicators signal levels / quality

c) Fixed bug with the "escape" antenna system, which is set by protocol DiseqC 1.2 and has an additional stationary antenna mounted on a protocol DiseqC 1.0

g) when setting the turning of a long button press <<**** initiates the continuous movement of the antenna, if you signal the motor stops (you need at the beginning of the search set 100% accurate data workshop desired satellite transponder).

New Software 5.57

bug-fix version of 5.56 ...

- Optimizing cache EPG and teletext ...
- Edit bug version 5.56
**********************************************

5.56

This version of the software is designed those who were observed hovering in the receiver when the long-term continuous work on channels with the EPG and teletext ...

also optimized the processor workload by reallocating the arrays of memory, which now list the channels and teletext pages occurs 3-4 times faster .. The same applies to the speed of switching between channels (this is particularly well illustrated by the channels with low bitreydom) ...

- Digi Tv auto

For activation of a mode of automatic updating keys it is necessary in " MENU-8282 to include mode AU for the provider 00 00 21 11 (№1 in the list)
.

New Software 5.58

OPENBOX ( 1.17.70 от) 30.06.2009

Openbox X-800 & Openbox X-820 (Update NTV+(040600)

Boot Loader 1.00
S/W Version:0910
H/W Verion: 5:49

Openbox X-810 (Update NTV+(040600)

OPENBOX ( 1.17.73 от) 03.07.2009

*Update NTV+(040600)

New Software 5.59

New Software 5.60

- Fundamental changes in software (new database drivers and algorithms for signal processing) ...
- Mode supersglazhivanie fonts
- Mapping EMM RDA (for professionals)
- Turned off for AU Digi TV
- In the options menu added new item ..

menu-setting system settings, video-color menu

Soft 5.61 from 08.09.2009

- Fixed bug with persistence of plants left / right channel audio ...
- Fixed minor bugs and optimization ..

OPENBOX ( 1.17.86 от) 19.09.2009

Soft 5.62 from 23.09.2009



- Fixed all bugs related to sorting, moving, and deleting channels ..
- Fixed conversion receiver to the last channel after removal ...
- After scanning receiver is switched on for the last scanned channel ..
- Installation and USALS DiseqC automatically saved when you exit the menu ...

OPENBOX ( 1.17.87 от) 20.09.2009

OPENBOX ( 1.17.88 от) 24.09.2009

Soft 5.63 from 29.09.2009


Fixed bug with selecting and switching the channel on the serial number of infopaneli
- Fixed network search
- Fixed blind search (step change

Soft 5.64 from 02.10.2009

Fixed a bug related to the work of the card reader and w **** n
- Save in memory the last channel in the receiver's return (back) of any list of any sorts ..
- Transfer the detailed TV gide
- The main changes relate to the regime of domestic sharinga (from receiver to receiver) in the DRE Crypt

changes and modifications using the new software shall be a system in which customers are used as receivers Openbox F-500, F-540, X-540, 560.590
enter data in section N **** ha now we have so

4AE0 (4AE1) - 000011

Soft 5.65 from 07.10.2009


- In the new software adds another encoding, or rather there was division encoding DRE for type 2: DRE 1 and DRE 2

DRE 1 - for the old cards DRE version 1.2 (4AE0) and zelenok on glass fiber
DRE 2 - for the new DRE card version 2.4 (4AE1) and "protein" in the plastic

- Fixed receiver. on earlier versions, when during scanning accidentally switched off the receiver, then it hangs .. now on the scan team Power ON / OFF the receiver is not perceived ..

Soft 5.67 from 02.11.2009


- A new software update fixes a "white" and "green" cards encoding DRE

- Added a function for decoding teletext (example - Inter + channel from Sirius 5,0 E, whose telekst encrypted with the same key BISS)

Soft 5.68 from 02.12.2009



EPG completely redone for the following providers

- Cyfra + (HB 13.0E)
- Polsat (HB 13.0E)
- Sky Link (Astra 23.5E)
- CS Link (Astra 23.5E)

openbox 820 11.12.2009 ver. 5.50

http://fileshare.in.ua/3068940

Soft 5.69 from 28.12.2009

1) The emulator under "Strawberry channels" S1-S7

- 11727H 27500 3 / 4 (HB 13.0E)

Warning! for normal functioning of EMU for these channels should be done after casting software reset keys in the EMU (menu-1117-any encoding blue button), or finish in the EMU in the encoding Viaktsess provider

023b08 any key ...

If you use a card reader receiver official map for this package, then this ID should be removed!

2) Optimized the work card reader with card Cryptoworks (provider SkyLink Astra 23.5E)

3) Completely redesigned ticker ECM / EMM Pid Selector

English ....

a new software 5.69

1) the Emulator under "strawberry channels" S1-S7

- 11727H 27500 3 / 4 (HB 13.0E)

Attention!! For normal work EMU under these channels it is necessary after to make a software dump of keys in EMU (the menu-1117-any the coding-dark blue the button), or to add in EMU in coding Viaccess of the provider

023b08 with any key ...

If you use in cardreader receiver an official card on this package this ID should be removed!!!

2) work cardreader with cards Cryptoworks (provider SkyLink Astra 23.5E) Is optimized

3) All it is altered informer ECM / EMM Pid Selector

OPENBOX (v1.18.13 от) 06.01.2010


first of the new --

1) "strawberry" with 13.0 E (11727V)
2) AU Digi TV
3) updated the list BISS keys
4) added to the Games ..

Soft 5.70 from 29.01.2010

in EMU added service providers

020810 -> AB SAT / BIS
020820 -> AB Sat / BIS
021110 -> ART / JSC 1 -> 8
021120 -> ART / JSC 1 -> 8

OPENBOX (v1.18.19 от) 06.02.2010

Software is not tested
in the EMU should be added providers
020810 -> AB SAT / BIS
020820 -> AB Sat / BIS
021110 -> ART / JSC 1 -> 8
021120 -> ART / JSC 1 -> 8

21-02-2010

OpenboxF500_Ver5.70Fac_orginal_no_emu

Soft 5.71 from 23.02.2010

*Code optimization processor
*Removed unnecessary tasks to speed up
*Optimize all drivers (including the input RF power)

Soft 5.71 from 23.02.2010


- Code optimization processor
- Removed unnecessary tasks to speed up
- Optimize all drivers (including the input RF power)
- Fixed bug com port

Soft 5.72 from 03.03.2010

fix bugs of 70 and 71 version

1. The bug of definition of a card in the input reader of cards is corrected at transition from mode Standby when in properties of the input reader of cards submission of a feed on a card in mode Standby for Home share is included..

2. The bug of definition and work of a card in the top input reader of cards Х-560 and Х-590 is corrected at inclusion of a receiver by the switch on the back panel of a receiver.

3. The bug of an autoupdate of keys (prolongation of a subscription and activation of a card) package Sky Link (c is corrected
Cryptoworks).

4. The bug of switching of channels with alternating transmitters is corrected

Example - in the list channels cost

1-st channel - with 11727Н
2-nd channel - with 11642V
3-rd channel - with 11727H

At fast switching from the first on the third channel through the second, the tuner (the entrance block) was adjusted on the channel automatically (because of features of the channel of it could not occur (low speed, non-standard)). In the new version adjustment of the entrance block occurs only after pressing button OK.

Soft 5.73 from 22.03.2010


fix bugs 72-second version

Soft 5.74 from 30.03.2010

added

possibility to enter new keys for OP provider Canal Digitaal NL (19.2 ° E, Ird # to2, ID0000)

Soft 5.75 from 12.04.2010

added input of ECM IV (in EMU - IV) and ECM Seed (in EMU - SD)

16-byte ECM Seed divided into two pairs of 8 bytes
for IV entered only the first 8 bytes, the second half - insignificant ..

- In the new version is fully disabled at AU encoding Irdeto

- A new feature avtoperebora validity of the key providers for 0604

Attention! in software workers ECM IV, ECM Seed and keys only for the provider Bulsatcom (Hellas Sat 39.0E) ...

Soft 5.76 from 20.04.2010

*Fixed bug off LNB supply mode "Standby"

new software v 1.18.38 for the line of X-7xx ...

Fix audio and subtitle bugs
Fix the frequency of search
Bugfix Cryptoworks card
Updated list of TP 16 ° E



íîâûé ñîôò v 1.18.38 äëÿ ëèíåéêè Õ-7ÕÕ...

Èñïðàâëåíèå îøèáêè àóäèî è îøèáêè ñóáòèòðîâ
Èñïðàâëåíèå îøèáêè ÷àñòîòà ïîèñêà
Èñïðàâëåíèå îøèáêè Cryptoworks êàðòû
Îáíîâëåí ñïèñîê TP 16 ° E

New SW for Openbox 7x0 PVR 1.18.40

1. Fix of taym-shifta for models with built-in nano-flash...
2. Fiks apdeyta card of Cryptoworks

Soft 5.78 from 14.06.2010

Soft 5.79 from 16.06.2010


- Fixed editor of channels (in 5.78 allocated 2 channels at once, and favoritism in general it was impossible to allocate channel)
- Fixed start the bootloader (in 5,78 started without checking RAM)

ñîôò 5.80 îò 18.06.2010 äëÿ 500-é ëèíåéêè...

-óñòðàí¸í áàã ðåäàêòîðà êàíàëîâ, ïðè ïðîâåäåíèè ëþáîé îïåðàöèè ñ êàíàëàìè â âñïëûâàþùåì îêíå ïîäòâåðæäåíèÿ ê-âî ñåðâèñîâ ðåñèâåð îòîáðàæàë "0"

- óñòðàí¸í áàã íåîáíîâëåíèÿ äèíàìè÷åñêîé èíäèêàöèè ïîñëå íåêîòîðûõ îïåðàöèé ñ ðåñèâåðîì

à) ïîñëå çàëèâêè íîâîãî ñîôòà è ñòàðòà ðåñèâåðà íà äèñïëåå íå èñ÷åçàëà íàäïèñü boot

á) ïîñëå ñêàíèðîâàíèÿ êàíàëîâ ñ èíäèêàòîðà íå èñ÷åçàëà íàäïèñü "scan"

è ò.ä.

- óñòðàí¸í áàã ðåèíèöèàëèçàöèè êàðòðèäåðà

- óñòðàí¸í áàã ðåèíèöèàëèçàöèè scart ðàçú¸ìîâ (ðåñèâåð çàâèñàë ïîñëå ðåñòàðòà, åñëè ïîäêëþ÷åí êàáåëü ê ë

Âíèìàíèå!!! ïåðåä çàëèâêîé ñîôòà âåðñèè 5.80 ïðåäâàðèòåëüíî ñîõðàíèòå íà êîìïüþòåðå âàøè ôàéëû êàíàëîâ, óñòàíîâîê è êëþ÷åé ñ ïîìîùüþ ïðîãè Pobedit.. Ïîñëå ðåñòàðòà âîçìîæåí ñáðîñ ðåñèâåðà â çàâîäñêèå óñòàíîâêè!!!



software 5.80 from 18.06.2010 for the 500-th line ...

-Corrected bug editor of channels during any operation with the channels in the popup window to confirm the services of the receiver displays "0"

- Fixed bug unpatched after the dynamic display of some operations with the receiver

a) after pouring the new software and start the receiver to the display disappeared inscription boot

b) after scanning the channels with the indicator does not disappear inscription "scan"

etc.

- Corrected bug card reader reinitialize

- Fixed bug reinitialize the scart connector (receiver hangs after restart, if the cable is connected to l

Attention! before pouring the firmware version 5.80 pre-save your files on your computer channels, facilities and keys with progi Pobedit .. After the restart can reset receiver to factory settings!

Soft 5.81 from 22.06.2010


- Added input keys for providers

020,810 (020,818 in EMU)
020,820 (020,828 in EMU)
021100 (in EMU 021118)
021,120 (021,128 in EMU)


Attention! for normal operation of EMU is necessary after casting software to reset the keys in the EMU or flood ready key file for the data providers ..


keys are available in soft opening following channels ...


Package BIS Hot Bird 13.0E

11034 V SR 27500 FEC 3 / 4

Game One

11411 H SR 27500 FEC 5 / 6

Dorcel TV

11681 H SR 27500 FEC 3 / 4

RTL 9
AB 1
AB Moteurs
Animaux
Chasse & Pêche
TF 1
Escales
Toute l'Histoire
NT1
Action (France)
Mangas
Encyclo
XXL
France 5
France Ô
LCP
BFM TV

12149 V SR 27500 FEC 3 / 4

Equidia

12692 H SR 27500 FEC 3 / 4

M6
NRJ 12
France 2
W9
TMC
Ciné Polar
Ciné FX
Virgin 17
AB 3
AB 4
Gulli
Luxe TV
Orange sport info
France 3 Sat
France 4
Ciné First

Package CanalSatellit Astra 19.2E


12285 V SR 27500 FEC 3 / 4

AB Moteurs
AB 1
Animaux
Encyclo
XXL
Escales
Toute l'Histoire
NT1
Dorcel TV
Action (France)
Mangas
Ciné Polar
Ciné FX
RTL 9

Package BIS Atlantic Bird 5.0W

11054 V SR 29950 FEC 7 / 8

Equidia

11096 V SR 29950 FEC 7 / 8
France Ô

11512 V SR 29950 FEC 7 / 8

RTL 9
Mangas
AB 1
AB Moteurs
Orange sport info
Game One
Escales
Animaux
Encyclo
Toute l'Histoire
Chasse & Pêche
Action (France)
Ciné First
Ciné FX
Ciné Polar
XXL
Dorcel TV
TV 5 Monde FBS


11554 V SR 29950 FEC 7 / 8

TF 1
M6
Direct 8
W9
NT1
NRJ 12
France 4
BFM TV
Virgin 17
Gulli
ARTE Français

Soft 5.82 from 24.06.2010

new software with added 5.82 EMU under viaccess 3

- Added 08 key and to input keys for provider Canal Satellit France (Astra 19.2E)

032,820 (032,828 in EMU)

- Fixed bug with disconnect power converter for the 590-th model ...

OPENBOX (v1.18.45 от) 25.06.2010

Since no one has identified the desire to test new software, I spread it in public ...

Innovations and changes in software are many, there will be many questions that I probably will not answer ... Anyway, lion's share of functions I protest myself ...

So, we meet an entirely new software v 1.18.45 [/ color] [/ b] [/ url] - it would be better or worse, time will tell ..


from novelties

- A new type of emulator MCAS support irdeto2 and Via 2,6 / 3,0 (keys in software)
- Separate emulsion under Const CW and BISS
- Modem: Home networking, Satellite, Ethernet, SSSP (still no comment)

etc. etc.

tested and works

- Package BIS HotBird 13.0E (via 2.6)
- Package BIS Atlantic Bird 3.0 ° W (via 2.6)
- Package CanalSat France Astra 19.2E (via 3.0)
- Package Bulsatcom Hellas Sat 39.
0E (Irdeto2)
- BISS works as before, the initial search and binding, and then opened quickly .. (In memory of the receiver is virtually all the new keys)
- Quick update keys on maps Tricolor 13-series (ID 4AE1)
algorithm is as follows - insert card, do the restart through a switch on the back of the rez, and after 5 minutes we get the keys on all packages (base + Optima + night)
- Transition to EMU on the ball and back - 1 second ...
- Binding ID in CS is required ...

- New file format keys - keydata (no illusions expansion as a softcam) blends / filled as before via USB ...
- At this soft keys Const CW and BISS are not included in the key file, and enter manually ...

- New menu entry in the EMU, the old algorithm - Menu-8282
Further pop-up menu with three items
1) The editor of keys (the entrance to the editing menu keys MCAS - all encodings except Const CW and BISS)
2) Const CW - the EMU entry for editing, and manual input Const CW and BISS keys
3) Modem - login menu CS

is difficult

opened three additional menu

1) Model - if not connected to the Comport no specials.
modem - then you will simply default Home Networking (for other modes later ...)
2) User ID - Enter the CAID and PROV ID to link channels in CS, as before (the principle of same) ...
3) Speed RS-232 - Set the speed Comport for external modems

new software 5.83 from 06.07.2010 for the 500-th line ....

- Fix of cards Tricolor 52-Series in card reader ...

Attention! if you have a home CS map is used 52-series, then the client receivers introduce 4AE0/000015

Openbox F-300_Ver(0810).wsw tu X-800-5.49

Translited to russia
Information from wuk, who can come in handy.

I'm playing with here at your leisure with green stuff - share my experience ....
If you have a wild desire to look at your favorite striped Openbokse 800, and it does not take up the soldering iron - a method!

1. Altering your pet nizhepodveshennym software - is 5.12 for MaksimumTV. It almost turns into 540 Open. Current stsuko, native console does not recognize ...

2. We find in the store next door sat a universal remote - I used the one that in the picture - the price is about $ 5.
Drives in the remote code 142 (for the fact that in the picture) or 042 (were the same as in the picture, only the earlier versions)

3. The menu card choose DRECRYPT - pokes back dual-GPU (4ae0) green "- and - lo and behold - it seems
And it appears at all sorts of updates and there our football and night Murzilki

Cons methods - in this software is no EMU - so that porn does not look to Sirius
ps maybe - I do not know how to include EMU - 1117 is not exactly rolls .....
pps dual-GPU green stuff drunk photolithography made shortish - they are up against mikruhami in the face with a tuner and not enclose mikrik in card reader ... need to modify a file.

http://westsat.com.ua/attachment.php?attachmentid=9811&d=1279784891

OPENBOX (v1.18.51 от) 29.07.2010

Boards of software for Openbox X-600, correct operation editor Biss keys, the first key on TV Kiev with Amos. Skipping through AUChEdit, ie completely ready for pouring.