TPS in any firmware with Home Share

TPS in any firmware with Home Share. You need SBCL_v1.0i + vPlug1.7.0 + mpcs-0.8k-rc13n-i386-pc-cygwin. 100% work in golden interstar. Must work in other recivers.
1. Take new zip files.
2 Install in c://SBCL
3 Find in internet todays files tps.fns and v_tps.db, install in c://SBCL/Plugins
4. Install in sbcl-Tuner-tcp you ip № port 6001 and press start.
5 press vPlug-aktive twice
6 Configure mpcs.conf via mpcs-i. Copy in mpcs 2 files:

mpcs.server
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = 127.0.0.1,6001
Account = test,test
Fallback = 0
Group = 1

mpcs.user
[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
IDENT = 0500:007C00


7 Run mpcs
8 Go to TPS chanel & enjoy

TEST you own home share program if mpcs not work

TPS in any firmware with Home Share. You need SBCL_v1.0i + vPlug1.7.0 + mpcs-0.8k-rc13n-i386-pc-cygwin.
For LINUX user use mpcs (linux version).
Write to mpcs.conf you own com-port.
You must configure reciver protocol (may configure all with mpcs-i wia WINE in GUI).
Copy all config in /usr/local/etc.
Make mpcs executable, give right for user:
# chmod 777 mpcs-*
and copy file to /usr/sbin
SBCL work in linux under WINE (my version is 0.9.30)
Copy "SBCL" to c: drive for wine in .
Copy "SBCL.ini" and directory "Plugins" in user home directory.
Download from internet actual files "v tps.db" and "tps.fns" to "Plugins" directory
Go to c://SBCL/ and run
# wine SBCL
Press TUNER and write ip 127.0.0.1
Press Vplug - aktive twice
Start mpcs
# mpcs
Go to any TPS cannel & enjoy.
(SBCL for linux is a SB4L, but not work with plugins. If it is not right report me pls! Add to arhive)
My system is Slackware 11.0 relise of Wine 0.9.30

Solution for linux users:
http://www.sat-universe.com/attachm...share-tps-via-comp-linux.tar.bz2?d=1179318359
For LINUX user use mpcs (linux version).
Write to mpcs.conf you own com-port.
You must configure reciver protocol (may configure all with mpcs-i wia WINE in GUI).
Copy all config in /usr/local/etc.
Make mpcs executable, give right for user:
# chmod 777 mpcs-*
and copy file to /usr/sbin
SBCL work in linux under WINE (my version is 0.9.30)
Copy "SBCL" to c: drive for wine in .
Copy "SBCL.ini" and directory "Plugins" in user home directory.
Download from internet actual files "v tps.db" and "tps.fns" to "Plugins" directory
Go to c://SBCL/ and run
# wine SBCL
Press TUNER and write ip 127.0.0.1
Press Vplug - aktive twice
Start mpcs
# mpcs
Go to any TPS cannel & enjoy.
(SBCL for linux is a SB4L, but not work with plugins. If it is not right report me pls! Add to arhive)

I test in interstar. All ok. But today not find tps.fns and v_tps.db