OSCam_ymod v18

OSCam_ymod is a special version of OSCam developed by yuriks.

OSCam_ymod is the emu version of OSCam
i.e. it can read softcam.key ( It should be renamed as oscam.keys)

It can handle Clines without problems.

OSCam_ymod = CCCam + good Emu support ( I2 is ok ;) )

Attached are different versions.

please download the suitable one 2 your box

I Tested only the E1 version on Gemini image and EMU is ok and my clne is ok

I didnt test the other versions...test it on ur own risk

Please no Keyfiles in this thread and this section

All the credit goes to yuriks

Enjoy ;)

Config files :
Extract the attached file

copy whole folder "config" to /etc/tuxbox
change permissions to 644

if u have /etc/tuxbox/config in ur box
So copy the contents of the attached folder there
"don`t overwrite the config folder"
change permissions to 644

update ur keys (check the dreambox keys section for updated keys)

Restart ur box, start OSCam_ymod

now u have ur OSCam emu running :)

Thanks 2 testi for help :thum:

Enjoy ;)

Running Cline on OSCam_ymod

open oscam.server ( /etc/tuxbox/config/) using any linux editor

copy the following :

[reader]
label = server
enable = 1
protocol = cccam
device = dyndns of cs_server,port
account = user,password
group = 2
CAID =
Ident =
Services =

Start OSCam_ymod

Now ur cline works on OSCam_ymod

enjoy ;)

HI!
Is canal digitaal prov 0622(Astra 19°) runnig with keys ? Only Austria Sat, Orf and TNT are running with keys by me.
flgh

Running Cline on OSCam_ymod

open oscam.server ( /etc/tuxbox/config/) using any linux editor

copy the following :

[reader]
label = server
enable = 1
protocol = cccam
device = dyndns of cs_server,port
account = user,password
group = 2
CAID =
Ident =
Services =

Start OSCam_ymod

Now ur cline works on OSCam_ymod

enjoy ;)

This works on normal oscam, can you explain what is different about using a cline in this version?

HI!
Is canal digitaal prov 0622(Astra 19°) runnig with keys ? Only Austria Sat, Orf and TNT are running with keys by me.
flgh

u need to update C+NL keys
go to dreambox keys section and download the latest oscam.keys file
C+NL should work then ;)

This works on normal oscam, can you explain what is different about using a cline in this version?

yes, this works on normal OScam
but normal oscam is not EMU...it s only for Card Sharing
OSCam_ymod = normal OScam + EMU :)

Tested works fine but not with seca emu 0030..
(keys are correct )
Can be used as dvbapi or only as cardserver+emu?
Greetings

IS TV GLOBO OK

no it isnt!
if you start it with telnet oscam will say that no reader is there for tvglobo althought that the keys are in there!

yes, this works on normal OScam
but normal oscam is not EMU...it s only for Card Sharing
OSCam_ymod = normal OScam + EMU :)

Thanks for your quick reply, so only difference is it can use keys.

Hd channels on TNT not clearning ..

test on dm800hd ,and on qboxhd

sorry guys
Seca and nagra not supported at the moment :(

but what about TNT HD???

tested with both sure hd encryption keys!
cam shows encrypted but black screen!

on gbox work!!

u need to update C+NL keys
go to dreambox keys section and download the latest oscam.keys file
C+NL should work then ;)
HI!
Thanks for your answer. I used the oscam keys (05.01.2012 09:34) from dreambox section. But Canal Digitaal is black. austria and tnt sat are running. do you use a special oscam.dvbapi for Canal Digitaal?

regards flgh

take a look at the webinterface and you will know why c+nl is not working for you.

take a look at the webinterface and you will know why c+nl is not working for you.
I have this here:


2012/01/07 23:38:34 1820 C004 c dvbapi: found pmt file /tmp/pmt.tmp
2012/01/07 23:38:34 1820 C004 c dvbapi: [ADD PID 0] CAID: 0622 ECM_PID:
056D PROVID: 000000
2012/01/07 23:38:34 1820 C004 c dvbapi: [ADD PID 1] CAID: 1817 ECM_PID:
0711 PROVID: 02006A
2012/01/07 23:38:34 1820 C004 c dvbapi: [ADD PID 2] CAID: 0100 ECM_PID:
0649 PROVID: 00006A
2012/01/07 23:38:34 1820 C004 c dvbapi: [ADD PID 3] CAID: 0100 ECM_PID:
0711 PROVID: 00006A
2012/01/07 23:38:34 1820 C004 c dvbapi: new program number: 07D6 (RTL 7 Nede
rland)
2012/01/07 23:38:34 1820 C004 c dvbapi: Found 3 IRDETO ECM CHIDs
2012/01/07 23:38:34 1820 C004 c dvbapi: trying irdeto chid index: 1
2012/01/07 23:38:34 1820 C004 c dvbapi (0622&000002/07D6/056D/0002/34:2F84/0
0-00): rejected group (81 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:34 1820 C004 c dvbapi: trying irdeto chid index: 2
2012/01/07 23:38:34 1820 C004 c dvbapi (0622&000009/07D6/056D/0009/34:2E8F/0
0-00): rejected group (95 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:34 1820 C004 c dvbapi: try pids again #1
2012/01/07 23:38:34 1820 C004 c dvbapi: trying irdeto chid index: 1
2012/01/07 23:38:34 1820 C004 c dvbapi (0622&000014/07D6/056D/0014/34:2D92/0
0-00): rejected group (88 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:34 1820 C004 c dvbapi: trying irdeto chid index: 2
2012/01/07 23:38:34 1820 C004 c dvbapi (0622&000009/07D6/056D/0009/34:2E8F/0
0-00): rejected group (83 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:34 1820 C004 c dvbapi (0622&000014/07D6/056D/0014/34:2D92/0
0-00): rejected group (85 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:40 1820 C004 c dvbapi: try pids again #2
2012/01/07 23:38:40 1820 C004 c dvbapi: trying irdeto chid index: 1
2012/01/07 23:38:40 1820 C004 c dvbapi (0622&000014/07D6/056D/0014/34:3F79/0
0-00): rejected group (77 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:40 1820 C004 c dvbapi: trying irdeto chid index: 2
2012/01/07 23:38:40 1820 C004 c dvbapi (0622&000009/07D6/056D/0009/34:3C64/0
0-00): rejected group (118 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:41 1820 C004 c dvbapi (0622&000014/07D6/056D/0014/34:3F79/0
0-00): rejected group (85 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:50 1820 C004 c dvbapi: try pids again #3
2012/01/07 23:38:50 1820 C004 c dvbapi: trying irdeto chid index: 1
2012/01/07 23:38:50 1820 C004 c dvbapi (0622&000014/07D6/056D/0014/34:E7C2/0
0-00): rejected group (74 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:50 1820 C004 c dvbapi: trying irdeto chid index: 2
2012/01/07 23:38:50 1820 C004 c dvbapi (0622&000009/07D6/056D/0009/34:E4DF/0
0-00): rejected group (85 ms) (of 0 avail 0) (no matching reader)
2012/01/07 23:38:50 1820 C004 c dvbapi: can't decode channel
2012/01/07 23:38:50 1820 C004 c dvbapi (0622&000014/07D6/056D/0014/34:E7C2/0
0-00): rejected group (86 ms) (of 0 avail 0) (no matching reader)
My oscam.dvbapi:
I: 0100:00006A
I: 0100:00006C
I: 0100:00006D
P: 0622

I have no idea. Austria Sat, tnt OK. But only 0622 Canal Ddigitaal don't work. Can anybody help me per PN.

regards flgh

update the 06 key from today and it will work!

update the 06 key from today and it will work!
I did it. Don't work. Mgcamd is OK.
flgh

I did it. Don't work. Mgcamd is OK.
flgh

I have this in oscam.keys
I 0622 M1 9.....
I 0622 M2 6......
I 0622 06 DD......

amigo check the strucure of the key which is needed for oscam y mod!

06key seems to be ok but,

I 0622 06 is wrong for the ymod!!!

you have to use I 062200 06 for this oscam!

take my keyfile from attachment and it will work you will see!!

tested in E2 mipsel box ...

french HD channels oki , but no SD channels then ...

uses aes round keys :)

New version 18t-23 of oscam mod from yuriks
- using external keys (from file softcam.keys) for provider TNTSat
- Added emu Nagra2
- Config reader in a single row Edit:no links to other forums

The configuration of readers in a single row
In test mode
To make configuration setting oscam.server made ​​in a single row

[protocol server, port user, password group]

for example
[newcamd server.com,1111 user,password 1]

this are the main parameters - the rest you can specify the names of the parameters
for example
[newcamd server.com,1111 user,password 1 label=reader1 ident=0500:040600]

In one parameter notallowed no spaces, ie
label = reader1 - not

Download (http://www.megaupload.com/?f=XQDOKS9V)

New version 18t-24 of oscam ymod from yuriks

In latest version you can add newcamd reader in format:
[newcamd s.server.com 10001 testuser testpassword]
[newcamd s.server.com 10002 testuser testpassword]
[newcamd s.server.com 10003 testuser testpassword]

Download (http://www.filedropper.com/18t-24)

New version 18t-25of oscam ymod. All thanks to yuriks!!!
- Fixed a bug in setting up a single line
- Corrected the work emulyator Via3 on channel NT1 (TNT)
- adaptation oscam-linux-pc to work with vdr-dvbapi-plugin

New Version 18_27

What is new :

in Russian
- исправил ошибку падения на sh4 при настройке ридеров в одну строку
- понимает .xpl скрипты без модификации (необходимо чтобы в названии было расширение .xpl) (тестировал на скрипте для зелени)

in English (using google translate :D..better translation s welcome)
- Fixed a bug in the fall when you configure sh4 readers on a single line
- Understand. Xpl scripts without modification (it is necessary that the title has been expanding. Xpl) (tested on a script for the greens)

All credit goes to Yuriks

for DDD Image
OscamYmod18-T27
put in the panel DDD

New version 18t-t30 of oscam ymod. All thanks to yuriks!!!
- Fixed AU on DRE
- Added search for config folders
- Redesigned choice irdeto chid and AU for this encoding
in oscam.dvbapi just add p:0652::::15 1
and do not need to change channels for picture appearing

Oscam Y mod 18-T30

for BH Image and also Nabilo E2

Oscam Y Mod 18 T 30

for EDG Nemesis and also New DE Image

Tested on my good old New DE 1.0

OScam Ymod forGP3 OE2

oscam_ymod_v18t30_plugin


Full version incl Webif, monitor and all the usual card reader


Tested positive for Single Spark + triplex

Installation Instructions:
Unpack the archive, then "plugins" folder and its contents contained on a USB flash drive (FAT32) copy.
On the infected machine, then a pop-up message.
Follow the instructions - that's it.

The Oscam configs are located by default in / var / tuxbox / config /

The Webif is accessible via the IP-box: 88
there you can see all the predefined reader, it can switch on and off.
To enable simple in Webif> READERS Click on LOCK!

e2-oscam-ymodv18-t33

Reader for S02 ,V13 HD01, HD02 Card

in / usr / bin permissions 755

gracias a Jopis

e1-oscam-ymodv18-t33

oscam-ymodv18-t33

by yuriks

OScamYMod M3 OE20

OScam YMod 18t33 for Merlin 3 OE20

OScam YMod 18t33 for Newnigma 2 OE20

origin post 39 (http://www.sat-universe.com/showpost.php?p=934676&postcount=39) by elgeneral :clapping:

OScam YMod 18t33 for Newnigma 2 OE20

revision 2 for Newnigma 2 OE2.0

- Changed script so that the cam is properly terminated.
- Removed debug script.

file for Gemini3 OE2.0 :thum:

oscam-ymodv18-t34


1834

[Global]
fallbacks - die Anzahl der Wiederholungen

[Reader]
reconnecttimeoutsec - Setzen Sie den Wert in Sekunden reconnecttimeout

oscam.keys

das Format der Schlüssel für biss
F [] 00

+ Es wurde ein Fehler in der Definition videopida biss Kanälen mpeg4

+ Bei der Einstellung der Leser in einer Zeile
[Newcamd sharing.server.com 99.999 testuser testpassword]
generiert automatisch ident-Filter gewährleisten Leser aus der Liste auf dem Server Provo


orginal


1834

[global]
fallbacks - количество повторных запросов

[reader]
reconnecttimeoutsec - устанавливает значение параметра reconnecttimeout в секундах

oscam.keys

изменен формат ключей для biss
F [<onid>]<sid><video pid> 00 <ключ>

+ исправлена ошибка определения видеопида на biss каналах mpeg4

+ при настройке ридера в одну строку
[newcamd sharing.server.com 99999 testuser testpassword]
автоматически формирует ident фильтр на етом ридере из списка провов на сервере

thx yuriks

Oscam y mod 18 T34 DVBAPI for BH Image and also Nabilo E2(if you have right kind of libs onboard)

oscam_ymod V18 T34

openPLI openAAF openVIX Image incl Reader S02/V13 and HD01/HD02


thanks to postla

oscam_ymod V18 T34 for:


Merlin3 OE20
GP32 OE20
Newnigma2 OE20


thanks to MiRoMOMO

OoZooN OE2.0 Images

Oscam Y MOd18-T35 only mips

+

OSCAM ymodv18-t35-nct build #0

• oscam.sh4.stapi

• oscam.sh4

• oscam.ppc.old

• oscam.mips

THX to osx

OscamYmod18-t35 DVBAPI

OscamYmod18-T35/CCcam213 ready setup to "share JSC-Emu" to CCcam

OscamYmod18-T35/CCcam230 ready setup to "share JSC-Emu" to CCcam

For BH-Image and also for Nabilo E2(right libs required)

OscamYmod18-t35 + OscamYmod18-t35ntc for Nemesis Image and also NewDE Image

OscamYmod18-t35nct DVBAPI

OscamYmod18-T35nct/CCcam213 ready setup to "share JSC-Emu" to CCcam

OscamYmod18-T35nct/CCcam230 ready setup to "share JSC-Emu" to CCcam

For BH-Image and also for Nabilo E2(right libs required)

oscam ymod v18t37:

ipk for BlackHole all structure

OscamYmod18-t37

OscamYmod18-T37/CCcam213

OscamYmod18-T37/CCcam230

gracias al amigo senns69 por compartir su sabiduria conmigo :clapping:

OscamYmod18-t39

1839

festes Protokoll cccam

by yuriks

ipk for BlackHole all structure :nana:

OscamYmod18-t39

OscamYmod18-T39/CCcam213

OscamYmod18-T39/CCcam230