TNT Sat 19.2°E ** Chat Only Here, No Keys **

Pages : [1] 2 3 4 5 6 7 8 9 10 11

madriles2010
07-06-2011, 19:40
It seems to be encrypted except TF1. Do you "see" the same?

marokino08
07-06-2011, 20:23
All work for me !

barhoum_
07-06-2011, 20:30
please y can't open fr3and fr5 with omnia2 and an fte alic (starsat 5300 super)

valentino50
07-06-2011, 20:50
samewise here TNT is working fine

percivjr
18-06-2011, 12:39
If so, what with, please?

Thanks.

Looker
18-06-2011, 12:47
If so, what with, please?

Thanks.

Working well here,NT1 is opened with official Orange card or official BIS card.

But, black screen using only EMU, cause seems they have "accidentaly" deleted TNTSAT ID 030B00 on NT1 channel few days ago.

Sure it will come back soon.

xXTomXx
18-06-2011, 13:02
no. 030b00 is still on. works with omnia card for a few seconds, then picture stands, then works again and so on...

empb
18-06-2011, 13:13
No there is no 030B00 look at Fausto Viaccess (Irdeto X-in-1 Serial Connection, default sid) Tracker log. It was removed at midnight a few days ago when they changed Key08 of TNT Sat and added Key08 Ident 030B00 to the 5 Canal+ channels on 19E 11856V: CanalSat uses The hacked provider of TNT: 030B00 (http://www.sat-universe.com/showthread.php?t=210107)

It clears occasionally with Omnia Card when it is briefly FTA, so in other words it is not the Omnia Card that clears it because there is no Ident 030B00 active on this transmission at the moment Looker is 100% correct. :thum: and xXTomXx you must be wrong m8!

PS. I also own Omnia Card.

xXTomXx
18-06-2011, 13:31
system: Viaccess
caid: 0x500
provider: TNT Sat (19E)
provid: 0x30b00
pid: 0x1788
using: newcamd
address: 192.168.178.30:11112
hops: 0
ecm time: 0.051

2011/06/18 13:30:16 2F4F14B0 c #### (0500&030B00/4284/2A:E283): found (36 ms) by omnia (of 1 avail 1)

empb
18-06-2011, 13:38
What freq NT1 are you looking at because I have looked at both NT1's on 19E 12285V and there is no Ident 030B00 seen by Fausto 100%.

There is Key09 Ident 022610 (Canal Sat) active thou.

And TNT Sat's Old Key08 on Omnia Plus Card does not open anything (Canal+ 11856V etc) neither does Old Key09 (Direct Star etc).

TheHighLander
18-06-2011, 13:41
using: newcamd


Do u open it by Omnia or Newcamd?

Maybe is opened by Cardsharing SERVER with another provider...To be

sure,Scan its frequency again and see if will the provider be deleted or

not..;)

I don't receive its frequency but I have friends who said that it's deleted

the hacked provider of TNT.:)

empb
18-06-2011, 13:47
I don't receive its frequency but I have friends who said that it's deleted

the hacked provider of TNT.:)

I believe your friends myself.

I have asked one of our CaID / Provider experts (k98) to also look at this :)

because clearly something is going on...

xXTomXx
18-06-2011, 13:52
http://www.sat-universe.com/imagehosting/thum_1918364dfc8fcea0f85.jpg (http://www.sat-universe.com/vbimghost.php?do=displayimg&imgid=1956)

im using newcamd to connect from cccam to my db8k with oscam. and oscam shows that there is 030b00.
working the same on both nt1 channels on 12285.

TheHighLander
18-06-2011, 13:54
@hamzasat

Please,Give us a screenshot of V-plug Monitor on NT1.

empb
18-06-2011, 13:57
Yes so xXTomXx opens it with card sharing and not Omnia Card as he stated earlier.

I still say open with some other viaccess something odd going on here

@ xXTomXx

Does its still open for you if you add 030B00 to your ignore list?

And does it no longer open if you ignore the other Viaccess Providers (022610, 032830, 042800 etc) instead assuming Mediaguard and Nagravision ECMs also ignored.

xXTomXx
18-06-2011, 14:08
just tested again with db8000 and oscam/cccam. no servers, no lines in there. only two cards. omnia and german v13. you can believe it or not.

empb
18-06-2011, 14:12
Which Omnia Plus Card file? And which Key you see as active?

xXTomXx
18-06-2011, 14:30
latest file from here (http://www.sat-universe.com/showthread.php?p=786995#post786995).
i cannot see which key is in use.

empb
18-06-2011, 14:41
Great thats a link to the whole thread.

You say latest so guess post33: here (http://www.sat-universe.com/showpost.php?p=786995&postcount=33)

and zip or rar (because I am also using Omnia file from post 33 of that thread)

thanks

The_Great_WZ
18-06-2011, 14:45
Now, i've all TNTSAT down

xXTomXx
18-06-2011, 14:46
latest file from here (http://www.sat-universe.com/showthread.php?p=786995#post786995).

latest file is in #33.:D i think im using the rar file.

empb
18-06-2011, 14:50
Now, i've all TNTSAT down

Key09 ok here (Embedded EMU Diablo Ipnosys034, DIRECT STAR 12522V, FRANCE2 11895V, FRANCE3 11817V, FRANCE4 12522V etc)

edit: Diablo Light v2 running Ipnosys026 opens NT1!!!! via EMU!! no luck with Ipnosys034 thou. (without Omnia Card inserted). Answers on a Postcard please as to what this means.........!!!! If I wasn't confused before I am now! :confused:

empb
18-06-2011, 15:04
k98 also confirms there is Ident 030B00 still on both NT1's, so appologies xXTomXx for not believing you at first. As usual it is always worth persevering if one member say open and others say not. Whatever has changed with NT1 it is not the same with the 5 Canal+ channels on 11856V now carrying Ident: 030B00, I still can not open them.

Hi,

I' ve got 2 services named NT1 on this TP:

14:37:02.153 CCcam: found nagra caid: 0x1863 ecmpid: 0x18c8 id: 0x0
14:37:02.153 CCcam: found viaccess caid: 0x500 ecmpid: 0x1728 id: 0x32920
14:37:02.154 CCcam: found viaccess caid: 0x500 ecmpid: 0x1748 id: 0x22610
14:37:02.154 CCcam: found viaccess caid: 0x500 ecmpid: 0x1688 id: 0x32940
14:37:02.155 CCcam: found viaccess caid: 0x500 ecmpid: 0x1788 id: 0x30b00
14:37:02.155 CCcam: found viaccess caid: 0x500 ecmpid: 0x17a7 id: 0x32830
14:37:02.155 CCcam: found viaccess caid: 0x500 ecmpid: 0x17c7 id: 0x42800
14:37:02.155 CCcam: found viaccess caid: 0x500 ecmpid: 0x18a8 id: 0x43330
14:37:02.156 CCcam: found viaccess caid: 0x500 ecmpid: 0x1888 id: 0x43300
14:37:02.156 CCcam: found viaccess caid: 0x500 ecmpid: 0x1789 id: 0x30b00
14:37:02.157 CCcam: found seca caid: 0x100 ecmpid: 0x1828 id: 0x3311
14:37:02.157 CCcam: found seca caid: 0x100 ecmpid: 0x1848 id: 0x3317
14:37:02.157 CCcam: found seca caid: 0x100 ecmpid: 0x1868 id: 0x3315
14:37:02.157 CCcam: found seca caid: 0x100 ecmpid: 0x1808 id: 0xa821
14:37:02.158 CCcam: cam[0] set PMT for sid=4290


14:38:01.622 CCcam: found nagra caid: 0x1811 ecmpid: 0x1828 id: 0x0
14:38:01.622 CCcam: found nagra caid: 0x1811 ecmpid: 0x1868 id: 0x0
14:38:01.622 CCcam: found nagra caid: 0x1863 ecmpid: 0x18c8 id: 0x0
14:38:01.623 CCcam: found nagra caid: 0x1811 ecmpid: 0x1848 id: 0x0
14:38:01.623 CCcam: found viaccess caid: 0x500 ecmpid: 0x1728 id: 0x32920
14:38:01.623 CCcam: found viaccess caid: 0x500 ecmpid: 0x1748 id: 0x22610
14:38:01.624 CCcam: found viaccess caid: 0x500 ecmpid: 0x1688 id: 0x32940
14:38:01.624 CCcam: found viaccess caid: 0x500 ecmpid: 0x1788 id: 0x30b00
14:38:01.624 CCcam: found viaccess caid: 0x500 ecmpid: 0x17a7 id: 0x32830
14:38:01.624 CCcam: found viaccess caid: 0x500 ecmpid: 0x17c7 id: 0x42800
14:38:01.625 CCcam: found viaccess caid: 0x500 ecmpid: 0x18a8 id: 0x43330
14:38:01.625 CCcam: found viaccess caid: 0x500 ecmpid: 0x1888 id: 0x43300
14:38:01.625 CCcam: found viaccess caid: 0x500 ecmpid: 0x1789 id: 0x30b00
14:38:01.626 CCcam: found seca caid: 0x100 ecmpid: 0x1828 id: 0x3311
14:38:01.626 CCcam: found seca caid: 0x100 ecmpid: 0x1848 id: 0x3317
14:38:01.626 CCcam: found seca caid: 0x100 ecmpid: 0x1868 id: 0x3315
14:38:01.627 CCcam: found seca caid: 0x100 ecmpid: 0x1808 id: 0xa821
14:38:01.627 CCcam: cam[0] set PMT for sid=4284

030b00 still alive :)

testi
18-06-2011, 15:15
please someone post some ecms :)

k98
18-06-2011, 15:27
Share log by putty.

Only every second controlword is right:

http://www.bilderhoster.net/thumbs/cfg95lp3.png (http://www.bilderhoster.net/img.php?id=cfg95lp3.png)

empb
18-06-2011, 18:33
For Diablo WiFi users should be ok for NT1 with Underworld209, anyone confirm?

k98
18-06-2011, 23:55
With UW 2.08 & 2.09 only NT1, not all TNT channels are clearing.
But with UW 2.14 all SD & HD services are OK except NT1 on my WiFi Gen II.

testi
19-06-2011, 03:53
thanks for the picture , but ecm is incomplete ...

meanwhile I found some ecm`s

only difference is lenght of ecm ... so only a matter of time when it will fixed on all the emus

xXTomXx
19-06-2011, 14:15
looks ok now with oscam version 5432. watching for 15 minutes. no freezes at all.

2011/06/19 14:11:34 2DDFF4B0 c anonymous (0500&030B00/4284/12A:DB8B): found (83 ms) by omnia (of 1 avail 1)
2011/06/19 14:11:34 2DDFF4B0 c anonymous (0500&030B00/4284/12A:DB8B): cache2 (82 ms) by omnia (of 1 avail 1)
2011/06/19 14:11:49 2DDFF4B0 c anonymous (0500&030B00/4284/12A:E8DB): found (134 ms) by omnia (of 1 avail 1)
2011/06/19 14:11:49 2DDFF4B0 c anonymous (0500&030B00/4284/12A:E8DB): cache2 (133 ms) by omnia (of 1 avail 1)
2011/06/19 14:12:04 2DDFF4B0 c anonymous (0500&030B00/4284/12A:80E8): found (83 ms) by omnia (of 1 avail 1)
2011/06/19 14:12:04 2DDFF4B0 c anonymous (0500&030B00/4284/12A:80E8): cache2 (82 ms) by omnia (of 1 avail 1)
2011/06/19 14:12:19 2DDFF4B0 c anonymous (0500&030B00/4284/12A:A46A): found (83 ms) by omnia (of 1 avail 1)
2011/06/19 14:12:19 2DDFF4B0 c anonymous (0500&030B00/4284/12A:A46A): cache2 (34 ms) by omnia (of 1 avail 1)
2011/06/19 14:12:34 2DDFF4B0 c anonymous (0500&030B00/4284/12A:0CCC): found (83 ms) by omnia (of 1 avail 1)
2011/06/19 14:12:34 2DDFF4B0 c anonymous (0500&030B00/4284/12A:0CCC): cache2 (83 ms) by omnia (of 1 avail 1)

testi
21-06-2011, 01:05
0x80, 0x71, 0x27, 0x01, 0x80, 0x2F, 0x90, 0x07, 0x03, 0x0B, 0x00, 0x08, 0x05, 0x67, 0x00, 0xE2, 0x03, 0x3E, 0xD2, 0x00, 0xE2, 0x03, 0x3E, 0xD2, 0xFE, 0xEA, 0x10, 0xB1, 0x14, 0x3A, 0x2E, 0xC1,
0xFC, 0x0B, 0xF3, 0x25, 0x8D, 0x21, 0xEB, 0xEC, 0x02, 0xCE, 0x52,...

no keychange ...

KeyIndex = ecm[ i + 5] & 0x0F;

opens fine on my neotion ...

cr52
21-06-2011, 20:42
NT1 & NRJ12 down with Vplug ???

hamzasat
21-06-2011, 23:00
Key active VIACCESS:0x300042-Key00 :thum:

http://www.qzal.net/5-2011/13086928011.gif

InformedŽ
21-06-2011, 23:42
NT1 & NRJ12 down with Vplug ???
Hi cr52
Vplug NRJ12 and NT1(19.2°E) not work others all still work...:thum:

percivjr
21-06-2011, 23:50
Key active VIACCESS:0x300042-Key00 :thum:

vPlug reports it as key 00, CCcam as key 03 and Mgcamd crashes. I think it's all to do with ECM length change on NT1.

empb
22-06-2011, 00:06
Hi cr52
Vplug NRJ12 and NT1(19.2°E) not work others all still work...:thum:

NT1 still opens on Diablo Light v2 Rev3.9 with Ipnosys026.

But NRJ12 does not, with Ipnosys026 or 034 or Omnia Card read with Fausto or Diablo CAM or Viaccess Black CAM. (Or it could be because ECM not seen by Fausto and CAMs see the 022610 Ident Key first without having an ignore function?)

Take it both ok with latest Oscam and Omnia? Or AES different? Or something now different with ECM on these two channels (different to each other as well as being different to the Key09 channels eg FRANCE2)?

xXTomXx
22-06-2011, 00:40
Take it both ok with latest Oscam and Omnia? Or AES different? Or something now different with ECM on these two channels (different to each other as well as being different to the Key09 channels eg FRANCE2)?
im not at home, so i only can say what my client box does. server is db8k with oscam and omnia.
nrj12 only works with oscam at client, not with cccam. all other tnt-channels looks ok with cccam too.
nt1 only runs freezerfree on serverbox.

testi
22-06-2011, 01:38
... take a look at nano 90

... 90 07 03 0B 00 08 ...

provid is 030B00, key 08 still in use and working fine on nt1 and on nrj12

change :

keyindex = ecm[ i + 5] & 0x0F; //old value was i+4

cr52
29-06-2011, 16:18
TNT Sat all down ?

bellof
29-06-2011, 17:00
yes mate seems so!

think they did something with the lenghth of ecms!
oscam says ECM corrupt!

kingsat031
29-06-2011, 17:36
cristor atlas work 100/100

Looker
29-06-2011, 17:38
cristor atlas work 100/100

Yes, TNTSAT is rolling like a train here with my Cristor Atlas-E too. ;)

nimou6
29-06-2011, 18:06
yes tnt down with ScEmu

InformedŽ
29-06-2011, 18:19
TntSat(19.2°E) to use a different ECM...:(

empb
29-06-2011, 18:42
Take it back to as before at the moment? FRANCE2,3,4,5/DIRECT STAR ok with Diablo EMU (latest Ipnosys034). And NT1 still ok here with Ipnosys026.

coatch121
29-06-2011, 19:07
TNT Sat ECM Changed

Key09 no longer work (with some EMUs because of the changed ECM length)

example Channel: TMC (Tele Monte Carlo)
Caid: 0x0500 (sid:0x1FD8)
Provider: 030B00 Key 09

empb
29-06-2011, 19:51
TNT Sat ECM Changed

Key09 no longer work

example Channel: TMC (Tele Monte Carlo)
Caid: 0x0500 (sid:0x1FD8)
Provider: 030B00
Key 09

Yes you are right I can only open TMC with Ipnosys026 and Key09, it does not open with latest Ipnosys034 and Key09, another changed ECM :( :mad: :eek:

testi
29-06-2011, 21:19
only change is length of ecm ... key 09 still oki

debug output:


Incoming ecm:
80 70 E9 01 80 38 D2 02 0B 01 40 07 03 0B 00 09 05 67 01 E2 03 3E 3E 00 E2 03 3E
3E FF E2 03 3E 3E FE EA 10 1F 61 1D 54 66 49 04 BD 16 80 CC 2F AB 97 C7 B3 F0 0
8 4D EB 7C 9C 0B 3A 24 03 80 38 D2 02 0B 01 40 07 03 0B 00 08 06 15 01 E2 03 3E
3E 00 E2 03 3E 3E FF E2 03 3E 3E FE EA 10 29 5F 20 33 0E EC 74 49 0B 97 6A 13 47
85 C2 7E F0 08 D4 57 2C 55 DD 53 44 25 80 38 D2 02 0B 01 40 07 03 0B 00 08 06 1
5 00 E2 03 3E 3E 00 E2 03 3E 3E FF E2 03 3E 3E FE EA 10 89 4C CA 8D D6 8E B4 F8
99 D0 A3 E9 BF A4 3D 81 F0 08 7B 83 62 0A 04 37 38 D7 80 38 D2 02 0B 01 40 07 03
0B 00 09 05 67 00 E2 03 3E 3E 00 E2 03 3E 3E FF E2 03 3E 3E FE EA 10 F7 77 05 8
5 45 2F 4F 8B BC 00 8C E6 6E 63 B9 75 F0 08 D7 C4 A4 8E C0 77 CF 93
Handling nano:E9
Handling nano:01
Handling nano:80
Handling nano:38
Handling nano:D2
Handling nano:40
Handling nano:E2
Handling nano:E2
Handling nano:E2
Handling nano:EA
Length:E9
Provider :030B00
KeyIndex :09
NanoEA pos:210
NanoEA : F7 77 05 85 45 2F 4F 8B BC 00 8C E6 6E 63 B9 75
NanoEA after PreAes: 8F D0 F7 13 97 A0 82 61 E6 C1 7D 96 F0 7F 81 F9
Using key:CC 72 AA FE 52 65 D6 D0 46 08 E8 32 CE B9 EC 4D
pDW: 8E F1 1D 9C 95 F1 C9 4F 8C C5 94 E5 DD 3B 8C A4

empb
29-06-2011, 21:42
Yes you are right I can only open TMC with Ipnosys026 and Key09, it does not open with latest Ipnosys034 and Key09, another changed ECM :( :mad: :eek:

Yes Key09 not changed, only ECM changed, if Key09 had changed it would not work on Ipnosys026..............sorry if I wasn't clear in what I was saying! :o :p


:) :D :thum:

1bedu12
30-06-2011, 08:28
works again with new mdplug http://www.sendspace.com/file/agnpyc

beckhamsv
30-06-2011, 09:16
whether they be solutions to dreambox ... a new version of oscam?

cr52
30-06-2011, 11:30
Works on Vplug too just copy/past vmodules from Mdplug

beckhamsv
30-06-2011, 18:28
Are there solutions to dreambox ...??? new oscam or something ...?

percent see it already taken care of for SS2?

bellof
30-06-2011, 18:30
yes there is a solution!
have a look here:http://www.sat-universe.com/showthread.php?t=174123&page=5

beckhamsv
30-06-2011, 18:36
I do not understand anything about ... put me oscam version with which the ... TNTSAT, and what needs to activate and tune ... just oscam, or may cccc / oscam

testi
30-06-2011, 18:57
what kind of dreambox you are asking this for ?

ptdvod
30-06-2011, 19:11
for dm500s http://www.sat-universe.com/attachment.php?attachmentid=277251&d=1309454044

anahouwa
01-07-2011, 01:04
did any one have tryed this oscam version with tnt card ?

empb
01-07-2011, 21:03
I am sure this new Viaccess.mdl plug in works fine with vplug (as others have mentioned above).

My problem is with Fausto & vplug wrapper connected to receiver via CAM and Season Interface, I do not see the 030B00 ECM's correctly (Dragon/T-Rex/Matrix Reloaded Viaccess Handling bugs), my only hope is testing SSSP/RS232 Connection to Topfield receivers (if this works and is supported by my Toppy TF4000 PVR ????) or Diablo Light v2/Viaccess CAM and Fausto but I have never found a successful connection baud rate for Diablo Light v2/Viaccess Black CAM.

Anybody had success with either of these methods and if so what were your settings in Fausto?

percivjr
02-07-2011, 11:33
I am sure this new Viaccess.mdl plug in works fine with vplug

Well I'm not so sure!

I've tried countless permutations, but I can't get get it to work from my Dreambox.

I note that the 'new' Viaccess.mdl is dated 03/03/2011, which seems odd as it pre-dates the TNTsat ECM length change.

I'd be interested to know if anybody does have this working on a DM and the exact set-up, which versions of softcam, vplug, etc.

Thanks.

bellof
02-07-2011, 11:46
try with oscam and dvbapi!
works fine!

shishmishko
02-07-2011, 12:20
I am sure this new Viaccess.mdl plug in works fine with vplug (as others have mentioned above)...

Anybody had success with either of these methods and if so what were your settings in Fausto?
If you have a LAN connection on your receiver, skip the CAM and connect Fausto (an PC) and receiver through the port and N: line. (just in case TNTSAT).
:thum:

saty
02-07-2011, 13:39
Well I'm not so sure!

I've tried countless permutations, but I can't get get it to work from my Dreambox.

I note that the 'new' Viaccess.mdl is dated 03/03/2011, which seems odd as it pre-dates the TNTsat ECM length change.

I'd be interested to know if anybody does have this working on a DM and the exact set-up, which versions of softcam, vplug, etc.

Thanks.

I tried :) and CCcam is not able to handle ECMs or EMMs with a length more than 256 bytes, so it will not work on dreamboxes with CCcam until the developers fix this problem...

vPlug(Server) works fine with hadu on pc (updated yesterday).

Fausto doesnt work course its still the CCcam client who lacks the "new" 256 bytes send/request to Fausto ;)

xXTomXx
02-07-2011, 13:46
works fine!
why you have such bad ecm-times? should be much faster.

http://www.sat-universe.com/imagehosting/thum_1918364e0f04b5ac03b.jpg (http://www.sat-universe.com/vbimghost.php?do=displayimg&imgid=1979)http://www.sat-universe.com/imagehosting/thum_1918364e0f04c4f31ee.jpg (http://www.sat-universe.com/vbimghost.php?do=displayimg&imgid=1980)

bellof
02-07-2011, 13:54
maybe is because that i have 7 cards running on that oscam,also i´m doing TNT on a funcard!

percivjr
02-07-2011, 22:04
try with oscam and dvbapi!
works fine!

Thanks.

Is that with 'protocol=emu' or with a card?

If it's 'emu' could you please post the important bits of configuration to make it work?

Serjoga
02-07-2011, 22:09
maybe this is CS or official card, with softcam not works DM 500s.

xXTomXx
02-07-2011, 22:14
@Serjoga + @percivjr

it´s all said by @bellof

i´m doing TNT on a funcard!

Serjoga
03-07-2011, 09:17
just read that Golden Interstar 890HD open TNT...

percivjr
03-07-2011, 12:45
try with oscam and dvbapi!
works fine!

Thanks to bellof for pointing me in the right direction.

Here's my working solution:

oscam (v5496) on DM7020
oscam 'reader' using cccversion 2.1.1
on remote pc, vplug server, v1.0.2.16, also running CCcam v 2.1.1
viaccess.mdl (03/03/2011) from
http://www.sat-universe.com/showthread.php?p=798939&highlight=mdplug#post798939


NT1 not working however.

Guldgossen
04-07-2011, 17:48
I have a DM7025. Any chance to get TNTsat working on my box as well? I have CCcam v 2.2.1. Not sure about OSCam? It says 1.0.0 when I press the OK button or choose it from the blue button. Thanks in advance :)

zeeteefje
09-07-2011, 12:13
also i´m doing TNT on a funcard!

Is your TNTSAT funcard still working?

My OScam/dvbapi reports decoding is fine with the funcard but no picture. Apparantly something is wrong. Which funcard file are you using?

reza.vaseghi
09-07-2011, 16:17
does anybody has nwe tntsat keys?

bellof
09-07-2011, 16:30
@ reza!
keys still active!

@zeeteefje!
yes fun still active,but its how i say!!
works only on oscam with dvbapi!

zeeteefje
09-07-2011, 17:18
@Bellof,
What file are you using on your funcard?
My funcard is still decoding with latest Oscam+Dvbapi, but no picture anymore. I use "funtntnoaes09.hex" that used to work fine with Oscam. As Oscam is still reporting that the decoding is ok there must be either a problem with a key or ecm lenghth.

bellof
09-07-2011, 18:13
@Bellof,
What file are you using on your funcard?
My funcard is still decoding with latest Oscam+Dvbapi, but no picture anymore. I use "funtntnoaes09.hex" that used to work fine with Oscam. As Oscam is still reporting that the decoding is ok there must be either a problem with a key or ecm lenghth.

use that same file with oscam 5507

zeeteefje
09-07-2011, 18:18
Thanks a lot, now I know where to start my debugging. It must be either in the version or the Oscam configuration files, not the funcard. :thum:

reza.vaseghi
09-07-2011, 19:16
could u give the active key?

bellof
09-07-2011, 19:21
have a look in keysection here in SU!

there you will find it!

zeeteefje
10-07-2011, 12:26
Now I can finally confirm the funcard is still working.:D
I had two problems:
-Not the file on the card that I thought I had (the other purple card :))
-The aes keys not in the correct order.

I could not have solved this with at least the confirmation of the working file, too many variables. Thanks again.:thum:

percivjr
10-07-2011, 13:19
Is NT1 working for you with this solution?

bellof
10-07-2011, 13:22
no not work for me!

shows encrypted but black screen!

AR@$H
10-07-2011, 13:55
TNTSAT Full work on tiger t600 hd / titanium 20000hd :thum::clapping:

bellof
10-07-2011, 14:44
my fun does cost around 3 euro!
what does your receiver cost??

so it´s ok for me!

xXTomXx
10-07-2011, 16:06
Is NT1 working for you ...?
nt1 still ok with omniacard and oscam.

empb
10-07-2011, 16:30
TNT Sat now down here with Ipnosys035 - was ok yesterday.

And not even NT1 with Ipnosys026 now.

No luck with Ipnosys034 either. Omnia card still opens some (with Diablo & Ipnosys034, only solution again Oscam + Omnia) FRANCE 2, FRANCE 4, TMC......etc...... no FRANCE3 Sat thou so looks like they have changed more ECMs ? :(

Guess all still ok with Omnia+Oscam?

bellof
10-07-2011, 16:44
with fun and oscam still quiet ok here!

kargo.25
10-07-2011, 16:48
This is current " DEBUG " for prov 030B00 , active Opkey is 09.

Incoming Datas :

81 71 3F 01 80 33 D2 02 0B 01 40 07 03 0B 00 09
05 67 01 E2 03 3E EA 00 E2 03 3E EA FE EA 10 CC
03 09 65 D6 FB 3B 24 6A 8A C4 B0 CC F8 FD BD F0
08 60 68 55 B6 1F 22 B7 C5 80 33 D2 02 0B 01 40
07 03 0B 00 08 06 15 01 E2 03 3E EA 00 E2 03 3E
EA FE EA 10 22 D1 57 E1 F0 D3 83 6A 42 9B FC 93
19 1A 58 B0 F0 08 BC 63 98 D0 BF 1C 3D 40 80 33
D2 02 0B 01 40 07 03 0B 00 08 07 01 00 E2 03 3E
EA 00 E2 03 3E EA FE EA 10 75 D8 EF 2E 3B 7A 95
F4 66 7C 94 E9 AA 00 5B 28 F0 08 3F D9 DA 71 01
3D 89 32 80 33 D2 02 0B 01 40 07 03 0B 00 08 07
01 01 E2 03 3E EA 00 E2 03 3E EA FE EA 10 0F 5C
F5 02 46 EB 62 AE DC AF 85 79 D8 56 46 E0 F0 08
ED 87 88 8D D1 08 A6 DC 80 33 D2 02 0B 01 40 07
03 0B 00 08 06 15 00 E2 03 3E EA 00 E2 03 3E EA
FE EA 10 9F 38 4F 87 73 10 59 20 79 52 80 5A 89
81 AA F2 F0 08 1A 9B 1A 6A F1 7C 5D 86 80 33 D2
02 0B 01 40 07 03 0B 00 09 05 67 00 E2 03 3E EA
00 E2 03 3E EA FE EA 10 66 6D 54 95 46 0B 5D F1
0F 02 CF F6 45 8F 1B A0 F0 08 C8 6E B5 6F DD B9
44 42

KeyIdx :09
ProvID:--> 03 0B 00
=============================================
In_Data (CW) : 66 6D 54 95 46 0B 5D F1 0F 02 CF F6 45 8F 1B A0

ECM_DECODE_OK- Good ECM's:
key used: CC 72 AA FE 52 65 D6 D0 46 08 E8 32 CE B9 EC 4D


Check DW: 54 76 2A D1 00 D3 E7 19
-DW2: CA 4B A8 6D AA FA D5 70

processDw->inputdcw: 54 76 2A D1 00 D3 E7 19
Via3x_Core->init indata: 00 D3 E7 19 00 00 00 00
Via3x_Core->postinit indata: 8B FA EF B7 00 00 00 00
Via3x_Core->prefinal indata: 8B FA EF B7 46 4E F7 74
Via3x_Core->final indata: 8B FA EF B7 29 2C 91 F1
Via3x_Fct1: 8B FA EF B7 29 F1 91 2C
Via3x_Core->init indata: 7D 87 BB FD 29 F1 91 2C
Via3x_Core->postinit indata: 44 37 AB E7 29 F1 91 2C
Via3x_Core->prefinal indata: 44 37 AB E7 3F D0 DD CF
Via3x_Core->final indata: 44 37 AB E7 F3 7C AE 12
Via3x_Fct2: 44 37 AB E7 F3 7C 12 AE
dcw->After data mixing: F3 AF F5 B7 7D 87 BB FD
dcw->After 3Des: AF 94 CB 31 C3 30 39 16
Via3x_Core->init indata: C3 30 39 16 F3 7C 12 AE
Via3x_Core->postinit indata: FA 80 29 0C F3 7C 12 AE
Via3x_Core->prefinal indata: FA 80 29 0C DD 93 C2 72
Via3x_Core->final indata: FA 80 29 0C AE C3 43 07
Via3x_Fct2: FA 80 29 0C AE C3 07 43
Via3x_Core->init indata: 01 57 CC 72 AE C3 07 43
Via3x_Core->postinit indata: 8A 7E C4 DC AE C3 07 43
Via3x_Core->prefinal indata: 8A 7E C4 DC 59 63 23 38
Via3x_Core->final indata: 8A 7E C4 DC 28 AD BA B7
Via3x_Fct1: 8A 7E C4 DC 28 B7 BA AD
processDw->outputDW after data mixing: EB 87 83 BB 01 57 CC 72

processDw->inputdcw: CA 4B A8 6D AA FA D5 70
Via3x_Core->init indata: AA FA D5 70 28 B7 BA AD
Via3x_Core->postinit indata: 21 D3 DD DE 28 B7 BA AD
Via3x_Core->prefinal indata: 21 D3 DD DE DC 79 5A B9
Via3x_Core->final indata: 21 D3 DD DE 63 9F A9 5D
Via3x_Fct1: 21 D3 DD DE 63 5D A9 9F
Via3x_Core->init indata: A9 16 01 F2 63 5D A9 9F
Via3x_Core->postinit indata: 90 A6 11 E8 63 5D A9 9F
Via3x_Core->prefinal indata: 90 A6 11 E8 83 9B 02 98
Via3x_Core->final indata: 90 A6 11 E8 23 BD 8A 04
Via3x_Fct2: 90 A6 11 E8 23 BD 04 8A
dcw->After data mixing: 89 47 D1 FA A9 16 01 F2
dcw->After 3Des: C0 C2 C6 B6 A2 19 B3 E2
Via3x_Core->init indata: A2 19 B3 E2 23 BD 04 8A
Via3x_Core->postinit indata: 9B A9 A3 F8 23 BD 04 8A
Via3x_Core->prefinal indata: 9B A9 A3 F8 66 59 68 E5
Via3x_Core->final indata: 9B A9 A3 F8 46 28 54 1D
Via3x_Fct2: 9B A9 A3 F8 46 28 1D 54
Via3x_Core->init indata: 86 EA DB E2 46 28 1D 54
Via3x_Core->postinit indata: 0D C3 D3 4C 46 28 1D 54
Via3x_Core->prefinal indata: 0D C3 D3 4C 08 19 20 A9
Via3x_Core->final indata: 0D C3 D3 4C 6B 35 79 E6
Via3x_Fct1: 0D C3 D3 4C 6B E6 79 35
processDw->outputDW after data mixing: C9 FF CA D7 86 EA DB E2


Debug:cwtmp:-> inputcw(Crypted) 66 6D 54 95 46 0B 5D F1
============ DW after Doing XOR =======
17 BB DC AE D6 F7 78 45 9D 89 E0 06 86 39 3C FB


Final DCW : 17 BB DC AE D6 F7 78 45 9D 89 E0 06 86 39 3C

empb
10-07-2011, 17:06
I can't log ECMs from 030B00 with Fausto due to Dragon CAMs Viaccess handling bug.

Can someone who can see the ECMs post the new latest (current) ECMs for say: DIRECT STAR, FRANCE2, FRANCE3 Sat, FRANCE4, TMC & NT1

thanks

:thum:

xXTomXx
10-07-2011, 19:10
direct star:
2011/07/10 18:22:37 308FF4B0 c dvbapi: request cw for caid 0500 provid 030B00 srvid 2405 pid 196F chid 0000
2011/07/10 18:22:37 308FF4B0 c trying reader 'omnia' filter 0500:030B00
2011/07/10 18:22:37 308FF4B0 c 0500:030B00 allowed by reader 'omnia' filter 0500:030B00
2011/07/10 18:22:37 308FF4B0 c request_cw2 to reader omnia fd=14 ecm=0091
2011/07/10 18:22:37 2D6094B0 r select: pipe is set
2011/07/10 18:22:37 2D6094B0 r trylock ll_lock wait
2011/07/10 18:22:37 2D6094B0 r ecm:
2011/07/10 18:22:37 2D6094B0 80 71 3F 01 80 33 D2 02 0B 01 40 07 03 0B 00 09
2011/07/10 18:22:37 2D6094B0 05 67 01 E2 03 3E EA 00 E2 03 3E EA FE EA 10 1B
2011/07/10 18:22:37 2D6094B0 28 AB FD 24 4C 0F 78 70 1E E9 16 0C B0 CD DF F0
2011/07/10 18:22:37 2D6094B0 08 C4 3B 2C 8B 9D 6C 10 AA 80 33 D2 02 0B 01 40
2011/07/10 18:22:37 2D6094B0 07 03 0B 00 08 06 15 01 E2 03 3E EA 00 E2 03 3E
2011/07/10 18:22:37 2D6094B0 EA FE EA 10 14 5B A5 73 8E 16 2A 16 99 C5 DA BF
2011/07/10 18:22:37 2D6094B0 4B 7C F4 D1 F0 08 C0 DE D4 85 42 1C 33 DC 80 33
2011/07/10 18:22:37 2D6094B0 D2 02 0B 01 40 07 03 0B 00 08 07 01 00 E2 03 3E
2011/07/10 18:22:37 2D6094B0 EA 00 E2 03 3E EA FE EA 10 2B 2E 64 5C 0B ED EB
2011/07/10 18:22:37 2D6094B0 30 E8 6C 49 D1 EE 78 05 8A F0 08 9A 5E 35 CF 25
2011/07/10 18:22:37 2D6094B0 BF E5 66 80 33 D2 02 0B 01 40 07 03 0B 00 08 07
2011/07/10 18:22:37 2D6094B0 01 01 E2 03 3E EA 00 E2 03 3E EA FE EA 10 BA B8
2011/07/10 18:22:37 2D6094B0 10 81 A8 C4 28 1B 4B 7D 77 EA FB 5C 5B A1 F0 08
2011/07/10 18:22:37 2D6094B0 7B D0 98 D9 45 92 05 E7 80 33 D2 02 0B 01 40 07
2011/07/10 18:22:37 2D6094B0 03 0B 00 08 06 15 00 E2 03 3E EA 00 E2 03 3E EA
2011/07/10 18:22:37 2D6094B0 FE EA 10 9F 99 64 C9 86 E4 B2 7D BF 5B 06 0C 4C
2011/07/10 18:22:37 2D6094B0 4F EC 79 F0 08 21 DF 88 68 FF 44 98 4B 80 33 D2
2011/07/10 18:22:37 2D6094B0 02 0B 01 40 07 03 0B 00 09 05 67 00 E2 03 3E EA
2011/07/10 18:22:37 2D6094B0 00 E2 03 3E EA FE EA 10 13 9B FD 80 4C B1 CB E3
2011/07/10 18:22:37 2D6094B0 3B B2 E3 1C 7C 8E F8 7B F0 08 C4 7A 82 D2 5D 7D
2011/07/10 18:22:37 2D6094B0 2A 20
2011/07/10 18:22:37 2D6094B0 r [viaccess-reader] ECM: nano D2 0x0b
2011/07/10 18:22:37 2D6094B0 r checking if the ecm number (567) match the card one (567)
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 01 for ecm number (567) for provider 030b00
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 01 for ecm number (567)
2011/07/10 18:22:37 2D6094B0 r [viaccess-reader] ECM: nano D2 0x0b
2011/07/10 18:22:37 2D6094B0 r checking if the ecm number (615) match the card one (567)
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 01 for ecm number (615) for provider 030b00
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 01 for ecm number (615)
2011/07/10 18:22:37 2D6094B0 r [viaccess-reader] ECM: nano D2 0x0b
2011/07/10 18:22:37 2D6094B0 r checking if the ecm number (701) match the card one (567)
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 00 for ecm number (701)
2011/07/10 18:22:37 2D6094B0 r [viaccess-reader] ECM: nano D2 0x0b
2011/07/10 18:22:37 2D6094B0 r checking if the ecm number (701) match the card one (567)
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 01 for ecm number (701) for provider 030b00
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 01 for ecm number (701)
2011/07/10 18:22:37 2D6094B0 r [viaccess-reader] ECM: nano D2 0x0b
2011/07/10 18:22:37 2D6094B0 r checking if the ecm number (615) match the card one (567)
2011/07/10 18:22:37 2D6094B0 r Skip ECM ending with = 00 for ecm number (615)
2011/07/10 18:22:37 2D6094B0 r [viaccess-reader] ECM: nano D2 0x0b
2011/07/10 18:22:37 2D6094B0 r checking if the ecm number (567) match the card one (567)
2011/07/10 18:22:37 2D6094B0 r keyToUse = 09, ECM ending with 00
2011/07/10 18:22:37 2D6094B0 r Decoding CW : using AES key id 1 for provider 030b00
2011/07/10 18:22:37 2D6094B0 r write to cardreader omnia:
2011/07/10 18:22:37 2D6094B0 CA 88 00 09 26 E2 03 3E EA 00 E2 03 3E EA FE EA
2011/07/10 18:22:37 2D6094B0 10 13 5F E4 3A 8C 43 1A 86 EB 88 6A 68 85 6B 79
2011/07/10 18:22:37 2D6094B0 D2 F0 08 C4 7A 82 D2 5D 7D 2A 20
2011/07/10 18:22:37 2D6094B0 r IFD Transmit:
2011/07/10 18:22:37 2D6094B0 CA 88 00 09 26
2011/07/10 18:22:37 2D6094B0 r IO: Sending:
2011/07/10 18:22:37 2D6094B0 CA 88 00 09 26
2011/07/10 18:22:37 2D6094B0 r IFD Transmit succesful
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 88
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 88
2011/07/10 18:22:37 2D6094B0 r IFD Transmit:
2011/07/10 18:22:37 2D6094B0 E2 03 3E EA 00 E2 03 3E EA FE EA 10 13 5F E4 3A
2011/07/10 18:22:37 2D6094B0 8C 43 1A 86 EB 88 6A 68 85 6B 79 D2 F0 08 C4 7A
2011/07/10 18:22:37 2D6094B0 82 D2 5D 7D 2A 20
2011/07/10 18:22:37 2D6094B0 r IO: Sending:
2011/07/10 18:22:37 2D6094B0 E2 03 3E EA 00 E2 03 3E EA FE EA 10 13 5F E4 3A
2011/07/10 18:22:37 2D6094B0 8C 43 1A 86 EB 88 6A 68 85 6B 79 D2 F0 08 C4 7A
2011/07/10 18:22:37 2D6094B0 82 D2 5D 7D 2A 20
2011/07/10 18:22:37 2D6094B0 r IFD Transmit succesful
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 90
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 90
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 00
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 00
2011/07/10 18:22:37 2D6094B0 r answer from cardreader omnia:
2011/07/10 18:22:37 2D6094B0 90 00
2011/07/10 18:22:37 2D6094B0 r write to cardreader omnia:
2011/07/10 18:22:37 2D6094B0 CA C0 00 00 12
2011/07/10 18:22:37 2D6094B0 r IFD Transmit:
2011/07/10 18:22:37 2D6094B0 CA C0 00 00 12
2011/07/10 18:22:37 2D6094B0 r IO: Sending:
2011/07/10 18:22:37 2D6094B0 CA C0 00 00 12
2011/07/10 18:22:37 2D6094B0 r IFD Transmit succesful
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 C0
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 C0
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 EA 10 FB BB 28 DE 4F C7 CE E4 84 4C 9B 6B B7 C9
2011/07/10 18:22:37 2D6094B0 07 87
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 EA 10 FB BB 28 DE 4F C7 CE E4 84 4C 9B 6B B7 C9
2011/07/10 18:22:37 2D6094B0 07 87
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 90
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 90
2011/07/10 18:22:37 2D6094B0 r IO: Receiving:
2011/07/10 18:22:37 2D6094B0 00
2011/07/10 18:22:37 2D6094B0 r IFD Received:
2011/07/10 18:22:37 2D6094B0 00
2011/07/10 18:22:37 2D6094B0 r answer from cardreader omnia:
2011/07/10 18:22:37 2D6094B0 EA 10 FB BB 28 DE 4F C7 CE E4 84 4C 9B 6B B7 C9
2011/07/10 18:22:37 2D6094B0 07 87 90 00
2011/07/10 18:22:37 2D6094B0 r reader: omnia ecm: 9100 real time: 88 ms
2011/07/10 18:22:37 308FF4B0 c dvbapi: write cw0 index: 0 (ca0)
2011/07/10 18:22:37 308FF4B0 c anonymous (0500&030B00/2405/142:0091): found (145 ms) by omnia (of 4 avail 4)
2011/07/10 18:22:37 308FF4B0 c cw:
2011/07/10 18:22:37 308FF4B0 FB BB 28 DE 4F C7 CE E4 84 4C 9B 6B B7 C9 07 87
2011/07/10 18:22:37 310FF4B0 c nmr(): len=2, errno=0
2011/07/10 18:22:37 310FF4B0 c received 5 bytes from client
2011/07/10 18:22:37 310FF4B0 00 01 FD 00 00
2011/07/10 18:22:37 310FF4B0 c send keepalive to client fd=37
2011/07/10 18:22:37 310FF4B0 c send 15 bytes to client
2011/07/10 18:22:37 310FF4B0 00 0D 00 00 00 00 00 00 00 00 00 00 FD 00 00
2011/07/10 18:22:42 328FF4B0 c nmr(): len=2, errno=0
2011/07/10 18:22:42 328FF4B0 c received 146 bytes from client
2011/07/10 18:22:42 328FF4B0 00 13 81 70 8D 00 00 01 0E 5A 0A 82 D1 00 CB AA
2011/07/10 18:22:42 328FF4B0 55 05 20 01 00 00 B6 7A 7E 0A 9C EF 4C 40 1E AE
2011/07/10 18:22:42 328FF4B0 FD A2 00 00 90 6C C0 01 0D 0E 90 2D 5C 93 69 3F
2011/07/10 18:22:42 328FF4B0 76 7B EC E6 69 4C 98 18 99 6E 24 36 7D 6F 2D F8
2011/07/10 18:22:42 328FF4B0 E8 EF B6 29 13 C6 BB 01 89 9E 8C 49 08 2E 8E 91
2011/07/10 18:22:42 328FF4B0 70 48 B3 35 A1 71 67 22 BD 98 6D C6 4C B5 0D BD
2011/07/10 18:22:42 328FF4B0 C1 BE EB C1 90 E3 A7 44 66 3A 7E 11 7B ED 67 9D
2011/07/10 18:22:42 328FF4B0 A3 65 CD 34 8C 5E 4F AC 84 75 47 B4 4B EB B0 50
2011/07/10 18:22:42 328FF4B0 97 C7 1A F3 FD 03 BD A2 C5 3A 38 29 53 5F 99 7D
2011/07/10 18:22:42 328FF4B0 67 CF

testi
10-07-2011, 20:04
if this is ecm from non working channel on your diabolo I can`t understand it .. because there is no change :

Provider :030B00
KeyIndex :09
NanoEA pos:296
NanoEA : 13 9B FD 80 4C B1 CB E3 3B B2 E3 1C 7C 8E F8 7B
NanoEA after PreAes: 13 5F E4 3A 8C 43 1A 86 EB 88 6A 68 85 6B 79 D2
Using key:CC 72 AA FE 52 65 D6 D0 46 08 E8 32 CE B9 EC 4D
Using key:CC 72 AA FE 52 65 D6 D0 46 08 E8 32 CE B9 EC 4D
pDW: FB BB 28 DE 4F C7 CE E4 84 4C 9B 6B B7 C9 07 87

gabelde
10-07-2011, 20:22
hmm that is strange-.. how can i get that log?

empb
10-07-2011, 20:40
I agree. Strange. Odd.

Direct Star work yesterday Diablo Ipnosys035 not work today Diablo Ipnosys035. Yet xXTomXx's post shows no change to incoming ECM (thanks testi) therefore Diablo should still open channel. xXTomXx can you post a fuller log (as a text attachment) including the ignored ECMs, for a 50-60 second period to help testi and the guys work out what is going on?

thanks

testi
10-07-2011, 21:10
think I know what`s wrong on diabolo :)

and I`ll bet it will start to work again after midnight without changing anything :)

TheHighLander
11-07-2011, 11:59
New module opens NT1 and all TNT:

http://www.multiupload.com/QIYFJRM0TS

Verdeoro
11-07-2011, 12:18
At this moment TNT work fine here...Ipnosys035 Diablo2 Rev4.0...:)

InformedŽ
11-07-2011, 12:26
New module opens NT1 and all TNT:
Hi @TheHighLander
This Via.mdl not work...:( Tested fausto/vplug 2.4.6

2010dz
11-07-2011, 15:35
packages 3 channels..
http://www.tracksat.com/satellite.asp?packagename=TNTSAT&SatelliteID=283&vt=package

TheHighLander
11-07-2011, 17:25
Hi @TheHighLander
This Via.mdl not work...:( Tested fausto/vplug 2.4.6

Did you test this?

TheHighLander
11-07-2011, 20:21
Hamzasat said is Ok with mdplug.:)


@InformedŽ:
To test on Vplug,
Please,use this Plugins Folder:

http://www.multiupload.com/EWIOEDC1UM (http://www.sat-universe.com/redirector.php?url=http%3A%2F%2Fwww.multiupload.com%2FEWIOED C1UM)

and replace the Viaccess.mdl with this one:
http://www.sat-universe.com/attachment.php?attachmentid=278627&d=1310397879

TNT and CSAT Ok but I don't receive NT1 to test.:mad:

Tested on DVBDream with this changes:

DVBDREAM/OPTIONS/PREFERENCES/PLUG-IN INTERFACE/PACKET SIZE 368 BYTES

InformedŽ
11-07-2011, 20:39
Hamzasat said is Ok with mdplug.:)


@InformedŽ:
To test on Vplug,
Please,use this Plugins Folder:

http://www.multiupload.com/EWIOEDC1UM (http://www.sat-universe.com/redirector.php?url=http%3A%2F%2Fwww.multiupload.com%2FEWIOED C1UM)

and replace the Viaccess.mdl with this one:
http://www.sat-universe.com/attachment.php?attachmentid=278627&d=1310397879

TNT and CSAT Ok but I don't receive NT1 to test.:mad:

Tested on DVBDream with this changes:

DVBDREAM/OPTIONS/PREFERENCES/PLUG-IN INTERFACE/PACKET SIZE 368 BYTES
Hi @TheHighLander
mdPlug to be TntSat(19.2°E) work but vplug black screen.It's via.module test your plugins closed...:)

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum