Firmware Openbox S9 HD

Data
09-08-2010, 22:16
Use the link to download the latest firmware todate 8th Aug 2010 get a usb pen drive format it fat32 loaded the HDS2_DUMP.abs onto it. place in the box at the back via the usb port.go into the menu and update the firmware via usb. this will give you the latest firmware and a good freind Breed has dun us all a favour and sorted the channels into favourites and removed the tiresome channels that can cause us a bit of problem. if you use your own channels some sky sports channels cause a reboot loop. the quickest way to fix is pull the sat wire out reboot change channel then remove it from your fav's. pick another sky sports channels as there are normally doubles of every sky sports channels.

-http://www.megaupload.com/?d=YXQVVGTL

fill yur boots up

grizzlyt
12-08-2010, 03:37
This receiver is not Linux.

It is a clone from China.

The original Label is from Ukraine .

This is their current receiver range:
Openbox-receivers (http://openbox.ua/receivers/s7/)

There are three models with Linux (S5,S7,S8) but they have an Sti7101 processor and they come from Korea (Fortis OEM).

mor1
08-09-2010, 22:25
New firmware 31/08/10 (http://www.megaupload.com/?d=TL1VYGRE)

Released 31/8

Features added:

Firmware includes Ccam version 2.1.4

Channel info bar seen when changing channels and when pressing "INFO" the first time now includes a progress bar for EPG data loading on the current channel.

Pressing "INFO" twice now brings up an enhanced EPG for the current channel with times, titles and program descriptions, as well as video, audio, and PCR PIDS and SID.

A third press of the "INFO" button gives the usual Channel, Satellite, Transponder, PID, Signal Intensity and Signal Quality indicators.

The CA Slot Setting menu now includes a selection to "Edit BOXID".

Serjoga
23-09-2010, 06:39
OpenBox S9 Factory Firmware: HDS2-10-07-11:072AMT

Factory NA firmware .abs file, released 07-10-2010.

***ALL FILES ARE USE AT YOUR OWN RISK ***

Serjoga
27-09-2010, 14:51
New Firmware for Openbox S9 27/09
1. French HD channels problems
2. CCCAM characters problems
3. Add Hungarian, correct french language

Serjoga
04-10-2010, 13:03
L53 Openbox S9 [03 October 10] v1.40
 
The channel list contains 30 satellites, this is by no means a finished list, as there is still a bit of editing to do.
To install this channel list simply transfer the unzipped channel list to a USB Stick
and insert the USB Stick into the USB port on the rear of the receiver, then enter the Menu, as described below.
Menu -> Tools -> Upgrade By USB and in Upgrade Mode select Image File[*.abs]
then select Upgrade File and use the < > arrow keys to scroll through
the files and select the L53_S9 channel list, and then click Start.
Once the file have been installed, you can then click the Zoom button to directly select and goto any satellite from within the list.

Serjoga
04-10-2010, 13:18
Ideal for Hispasat users. Can't Believe previous satellite list did not include Hispasat!!

- Updated Satellite List 02.10.2010 (30W - 72E)

- Hispasat Added (Main Transponders selected for faster scanning)

- Favourite Lists

ZON (30W)
MEO (30W)
SPANISH (30W)
KIDS (30W)


Extract to usb and insert on usb port on you receiver.

Navigate to Menu, Tools, Upgrade by USB, misc files and choose TP_PROG

prelude
14-10-2010, 18:02
New Official Firmware Released [HDS2-10-10-04-2a18CMT]

New English firmware released today 14 -10-10, it mainly addresse's the following problems, this is the second release that is aimed at correcting the following, as the first one was a beta release.

1. French HD channels
2.CCCAM Characters
3. Add Hungarian, correct French Language

Theres also a modified Dump file available which includes a full multi-sat channel list.

Please Note:
This OpenBox S9 Section is now an open section for all, including Guests, so anyone can download now.
http://sataid.net/forum/forumdisplay.php?264-OpenBox-S9

xmen
14-10-2010, 21:51
Any give a step by step guide to adding c:lines to the openbox S9 please.. ??

Thanks


here....:thum:

xmen
15-10-2010, 11:19
Solomend and Openbox s9 Setting TP_Prog

My Setting
Hortbird 13 and Astra 19,2

Favorit 1 Deutsch Free
Favorit 2 Kinder
Favorit 3 Sky DE
Favorit 4 Wiesenschaft
Favorit 5 Sport DE +IT
Favorit 6 Bundesliga
Favorit 7 Sky It and Free
Favorit 8 XXX

You can add other programs to research and then put them nee favorites

jjaco71
20-10-2010, 15:50
NM_HDS2_CMT_1010200755

1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as server

http://www.supershare.pl/?d=41FAEE202

Serjoga
20-10-2010, 16:02
NM_HDS2_CMT_1010200755




File is here :)

Serjoga
26-10-2010, 06:30
replace.list for openbox S9 - Solves Sky DE and Canal+ FR HD issues

Click Menu ->
Network Local Settings ->
MGCamd Plug Settings ->
Update Files by USB-> replace.list [MGCamd Plug]

Now click either the OK or Green button to select
replace.list and place a check mark next to it, once the check mark or tick is visable
click the Yellow button to upload.

You can then if you wish, check to see if the replace list has been correctly added, by
clicking Manage Config Files and clicking on replace.list

If all went well, you will see the

following lines
X: {{ 1833 } { 1702 }}
X: {{ 1811 } { 0100 }}

Serjoga
02-11-2010, 08:28
S9 HD User Manual
Whilst searching for a better editor I found this User Manual attached;

xmen
07-11-2010, 21:18
OpenBox S9 Modified Dump.file [04 November 2010]

This is a modified Dump file and was released on [04 November 2010]
This dump file is based on the the latest firmware release [HDS2-10-10-20:0747CMT]


Included is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.

=======================
What's New:
Added replace.list [German HD Channels okay on Astra]
Updated channel list: New settings added for 28.2 east Sky Premiere, Sky Thriller etc, and also included are a number of Asian Channels such as Zee, Sony, B4U etc ...
=======================

If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.

The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files.
Of course we are aware that some have the tendancy to remove the text files, I have no idea why, we are also aware of the fact, that our downloads and help files are being placed on other sites, and then claimed as their own work, which is quite sad, as they obviously have no idea how or what to do themselves, still if it makes them happy, who are we to stand in the way of their ignorance ...

All the best
Laurals.

Please Note:
I overlooked saving the following channels on 28.2east
1 .. ITV3 HD
2 .. ITV4 HD
simply scan the following settings and save them
11.758
H
29500

THX laurals53

xmen
12-11-2010, 18:28
New Official Firmware & Modified Dump File [HDS2-10-11-08:1100CMT]

New Official Firmware Released [HDS2-10-11-08:1100CMT]

What's New:
1 .. Sat List contains a number of additional satellites.
2 .. CA Slot Settings additional feature included 'Edit Smartcard Config' which seems to be for Irdeto based cards.
3 .. When entering Hex values in Key sections, the symbols are no longer recognised.
An example of this would be:
Enter 1 and only 1 is displayed, Enter 2 and you still get the option of a b c 2, as the letters a-f are included in Hex values.
The following numbers 0 1 4 5 6 7 8 9 will enter directly, making it much easier, and quicker to directly enter any Hex keys.

And entering BISS Keys will still achieve nothing, which is a shame.

I have also noticed, that the modified date of this official release is, '‎01 ‎January ‎2008, ‏‎01:28:58' which seems rather odd ?.


================================================== ================


This is a modified Dump file and was released on [09 November 2010]
This dump file is based on the the latest firmware release [HDS2-10-11-08:11007CMT]

Included is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Includes replace.list [German HD Channels okay on Astra]

=======================
What's New:
Updated channel list:
New channels added 13 east AXN Sci Fi, Fox +2, Fox Life +2, Fox Crime +2 etc
New settings added for 13 east Hallmark, CN, Music Box etc
New settings added for 28.2 east Sky Premiere, Sky Thriller etc
New channels added 28.2 east ITV3 HD, ITV4 HD etc
and also included 0n 28.2 east are a number of Asian Channels, such as Zee, Sony, B4U etc
=======================

If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-

1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit any of the files included in any way, or add any other extra files.
Of course we are aware that some have the tendancy to remove the text files, and I have no idea why.



THX Laurals53

xmen
14-11-2010, 12:45
OpenBox S9 Modified Dump.file with Channel List [13 November 2010]

This is a modified Dump file, and was released on [13 November 2010]
This dump file is based on the the latest official firmware release
[HDS2-10-11-08:11007CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list [German HD Channels okay on Astra]
The channel list can also be used on a fixed dish setup, simply click the Zoom button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated channel list:
All satellites updated.
Dish positioning problem corrected.
Many new channels added.
A number of channels updated with new settings.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a multi-sat coverage cline.
================================================== =================================

If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-

1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.

The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.

================================================== =================================
How to add the replace.list file.

Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.

You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files.
Of course we are aware that some have the tendancy to remove or edit the text files, and I have no idea why.

THX Laurals53

jjaco71
21-11-2010, 22:57
Para usarlo con Bulsat 39º - SCT, etc

Necesario:

Fausto Emulator

http://www.multiupload.com/P3K8GZVZ02

Un OpenBox S9 HD , etc...
Emu cccam.

Lo primero que hay que hacer, es instalar Fausto en el PC. Después de instalar hacemos lo siguiente.

Vamos a C:\Archivos de programa\Fausto\EMU\CardServer

Abrimos con un editor de texto el siguiente archivo.

FaustoServers.cfg

Abajo del todo añadimos estas lineas:


N: 192.168.x.x==****tu ip del PC

N: 192.168.x.x 10000 0102030405060708091011121314 {0100/000030 00002A 000068 000084 000085 000086 00009B}
N: 192.168.x.x 10100 0102030405060708091011121314 {0500/007400 021110 022C00 024300 024400 030700 032500}
N: 192.168.x.x 10200 0102030405060708091011121314 {1801/00C102 002111 001101}
N: 192.168.x.x 10300 0102030405060708091011121314 {0B01/000000}
N: 192.168.x.x 10400 0102030405060708091011121314 {0604/000000 000001}
N: 192.168.x.x 10500 0102030405060708091011121314 {0608/000000}
N: 192.168.x.x 10600 0102030405060708091011121314 {0622/000000}
N: 192.168.x.x 10700 0102030405060708091011121314 {1722/001101}

Guardamos y pasamos al paso siguiente:

Cogemos las ultima flores actualizadas de fausto y la metemos aqui

C:\Archivos de programa\Fausto\Keys

Pasamos al paso siguiente:

Cogemos el cccam.cfg y lo abrimos con un editor de texto , y editamos el cccam.cfg

Añadimos las lineas N:

N: 192.168.x.x==****tu ip del PC

N: 192.168.x.x 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10100 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10200 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10300 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10400 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10500 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10600 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10700 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14


Guardamos y pasamos al paso siguiente:

Metemos el cccam.cfg editado en nuestra unidad de usb y la pinchamos detrás del deco en la entrada de usb.

Ahora nos vamos a Menu -> Network Local Setting y le damos a CCcam Plug Setting -> Upload Files By USB , seleccionamos el archivo Cccam.cfg y le damos al botón verde y luego al boton amarillo para actualizar .

Una ves que ya tengamos subido nuestro cccam.cfg editado , vamos a activar las lineas N:

Ahora nos vamos a Menu -> Network Local Setting y le damos a CCcam Plug Setting -> Manage Config Files , seleccionamos el archivo Cccam.cfg y le damos al OK , ahora seleccionamos las lineas que queremos activar y le damos al boton verde para activarlas , y listo solo queda darle al exit y disfrutar

Thx by MUFI

Kalle_P
22-11-2010, 12:54
Check the vPlug_server to
http://www.sat-universe.com/showthread.php?t=179959

Mvh Kalle

jjaco71
25-11-2010, 00:33
New Official Firmware [HDS2_CMT_1011161216]
Release date: 24 November 2010

What's New:
Added: CCcam priority option
On bootup: Now it only displays Server 1 - Server 2 - Server 3 etc etc inplace of your cline info
Security Password: When entering secure sections such as CCcam section you will need to enter the Password 0 0 0 0
Other: A number of minor fixes has also been addressed.
NOTE !!!!! the receiver will reboot if you attempt to make a dump file ....

And as this is an official release, you will be required to add your own channel list, replace.list and priority file.

http://www.supershare.pl/?d=2EB1ED872

cccam.prio

http://www.supershare.pl/?d=BBC9AC6B2

Serjoga
25-11-2010, 09:23
Files

jjaco71
03-12-2010, 16:33
This is a modified Dump file, and was released on [03 December 2010]

This dump file is based on the the latest official firmware release
[HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list [German HD Channels okay on Astra]
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated christmas boot logo.
Updated channel list.
Sirius 5e renamed Astra 4A.
A number of channels added.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some have the tendancy to ignore the above request, and I have no idea why.

All the best
Laurals.

http://www.supershare.pl/?d=9ABBEAE32

Serjoga
03-12-2010, 16:46
File

jjaco71
10-12-2010, 01:51
This is a modified Dump file, and was released on [09 December 2010]
This dump file is based on firmware version [HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated channel list.
Updated channel sETTINGS on 16E 13E 28E
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some have the tendancy to ignore the above request, and I have no idea why.

All the best
Laurals.

http://www.supershare.pl/?d=5D99B7A02

Serjoga
10-12-2010, 08:17
File

Serjoga
10-12-2010, 08:21
L53 Openbox S9 Multi-Satellite Channel List v2.20 [09 December 10]

This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom button and select the satellite you wish access from the data base.
The channel list Default Motor Setting: DisEqC 1.2.
The channel list Default Channel Editor: SetEditHD100.
---------------------------------------------------------------------------
What's New:
A number of new or updated channel included on various satellites, including 5e, 13e, 16e, 28.2e
A number of non accessable channels removed from various satellites.
---------------------------------------------------------------------------
To install this channel list simply transfer the unzipped channel list to a USB Stick, and then insert it into the USB port, located on the rear of the receiver, then follow the instructions below.
Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Image File[*.abs]'
then select 'Upgrade File' and use the < > arrow keys to scroll through the files and select the [L53_S9 channel list] then click Start.
Once the file have been installed, you can then click the 'Zoom' button to directly select and goto any satellite from within the data base.

Anyone may use, or share this multi-satellite channel list, all I ask is that you do not remove or edit any the files included in the zip, or include any additional files, as certain sites tend to include a load of spam text links, and remove the original download site, guess they want to make you belive they created the channel list themselves ....

All the best
Laurals.

Serjoga
15-12-2010, 17:24
Plugin Web-brauser WebZeal for Openbox® S9 HD PVR

Soft Openbox® S9 HD PVR version 1.08.67

magictails
20-12-2010, 14:08
hi

Fix irdeto jsc card

HDS2_SCMT_Eur_Beta0.1 NEW-2010.11.10renew



GoodDay,

I read at some website fourms that there is a poroblem when using official irdeto smartcard.

Today, I borrowed official irdeto smartcard (JSC) from my friend, and I test it with my box.

Yes, there is a problem.

the channel freezes every second

My Firmware was 20-10-10

Then I upgrade to HDS2_SCMT_Eur_Beta0.1 NEW-2010.11.10renew

The porblem is solved


http://www.4shared.com/get/mZz1MD8s/HDS2_SCMT_Eur_Beta01.html

thnak for the works

HackTheNet
24-12-2010, 08:03
This is a modified Dump file, and was released on [23 December 2010]
This dump file is based on giemware version [HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Also included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
A number of new or updated channel included on, 11w, 4w, 1w, 5e, 9e, 13e, 16e, 19.2e & 28.2e
A number of non accessable channels removed from various satellites.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line: X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some have the tendancy to ignore the above request, and I have no idea why.

All the best
Laurals.

Download: http://www2.zippyshare.com/v/55636406/file.html

Serjoga
24-12-2010, 09:04
File

FileHunter
03-01-2011, 23:21
This is a modified Dump file, and was released on [02 January 2011]
This dump file is based on firmware version [HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
Well over 200 new or updated channel on all satellites.

The most noticable change is on Eurobird 9A [9east]

A number of non accessable channels removed from various satellites.

I believe all the channels that cause rebooting problems, have now been removed.

To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line: X: {{ 1833 } { 1702 }}
================================================== =================================


Thanks to

Laurals.

jjaco71
07-01-2011, 01:33
This is a New Official Firmware version, and was released on [06 January 2011]
The New Official Firmware version do not include any channels.

The L53_MOD dump file is based on firmware version [HDS2-11-01-02:0899CMT]
The modified download includes a full channel list pre-installed.

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
In version [HDS2-11-01-02:0899CMT] the following have either been added, fixed or changed:
1 .. Making a full system dump is now fixed.
2 .. CCcam Priority option added.
3 .. Security Password when entering sections such as the CCcam secrion has now been deactivated.
4 .. On Bootup the display will once again show the IP Address used in your clines.
6 .. A few minor bugs addressed, making the receiver more stable.

Well over 200 new or updated channels on various satellites.
Re-organised channel list on a number of satellites.
A number of non accessable channels removed from various satellites.

I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line: X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some still have a tendancy to ignore the above request.

http://www.supershare.pl/?d=42D0C0092

HDS2_L53_MOD

http://www.supershare.pl/?d=1D33D7342

magictails
07-01-2011, 13:49
hello

my TP_PROG.DBS 13/19E

with favoris For CS config

All CEE channels in French language

firm official S9 HD : 06 01 2011

Favoris list :
TNT fr
SRG /TELESAT HD /AB3 & Ab4
C+ HD fr & C Sat fr cinema & Bis Tv fr cinema
Orange Sat HD Fr 13 & 19E basiq cinema sport musiq doc
Csat Generaliste
Csat doc / Bis tv doc /
Csat fr Muziq & jeunesse & Equidia Pro 13°E
all XXX 13 & 19 ( sct ; red hot ; elite )


config disceq 1.4 list of TP update today with kingofsat ini

correction & add frequence ( no feeds frequence )

13°E disceq 1/4 scan complet
19°E disceq 2/4 scan complet
09°E disceq 3/4 scan partiel ( Hd channel )
05°O disceq 4/4 no scan


download :

http://rapidshare.com/files/44114527...scan_13_19.rar

password : magictails



upgrade with your USB stick

@ +

satlook
09-01-2011, 00:20
Download not available
The following download is not available:

http://rapidshare.com/files/44114527/..scan_13_19.rar0 KB

magictails
09-01-2011, 03:56
hi

hello

my TP_PROG.DBS 13/19E

with favoris For CS config

All CEE channels in French language

firm official S9 HD : 06 01 2011

Favoris list :
TNT fr
SRG /TELESAT HD /AB3 & Ab4
C+ HD fr & C Sat fr cinema & Bis Tv fr cinema
Orange Sat HD Fr 13 & 19E basiq cinema sport musiq doc
Csat Generaliste
Csat doc / Bis tv doc /
divers Csat fr Muziq & jeunesse & Equidia Pro 13°E
all XXX 13 & 19 ( sct ; red hot ; elite )


config disceq 1.4 list of TP update today with kingofsat ini

correction & add frequence ( no feeds frequence )

13°E disceq 1/4 scan complet
19°E disceq 2/4 scan complet
09°E disceq 3/4 scan partiel ( Hd channel )
05°O disceq 4/4 no scan


i repost here

pass : magictails

http://www.multiupload.com/1ERXPVT064

@ +

magictails
09-01-2011, 19:08
hi

what version you use in your dongle
what sat position tested
what frequency are you tested

dongle open channel :

edit by ig0r: READ FORUM RULES ABOUT LINKS TO OTHER SAT FORUMS!


Canal sat Horizon: NSS7 22°Ouest faisceau : West Africa


S9 HD it's for Cardsharing principaly

for open this provider use other emu intern

and use twin protocole : Dongle + emu interne
in network menu of S9

emu interne for :

only client Cs CCcam or mgcamd

or newcamd serveur /client

and echange C line ,N line , cws line :
for open other channel not open by your dongles

softcamkey for only CCW & biss key are ok with last firm to


@ +

jjaco71
10-01-2011, 20:03
This is a modified L53 Dump file, and was released on [10 January 2011]
This L53_MOD Dump file is based on the latest firmware version [HDS2-11-01-02:0899CMT]

Included in the L53_MOD Dump file is a multi-satellite channel list [V2.60].
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list
Also included is a constant cw file, which contains active Biss keys, mainly for use on 26E 10E 5E & 4W.

The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
A number of new or updated channels on various satellites added.
Re-organised channel list on various satellites.
Most non accessable channels removed.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your located in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Setup -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the list has been correctly added, by clicking Manage Config Files and clicking on replace.list if all went well, you will see the following example: X: {{ 1833 } { 1702 }}
================================================== =================================

How to add the Constant cw list.
Click Menu -> Network Setup -> CCam Client Setup -> Update Files by USB
-> Constant cw now click either the OK or Green button to select Constant cw and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the keys have been correctly added, by clicking Manage Config Files and clicking on Constant cw if all went well, you will see all the keys listed.
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some still have a tendancy to ignore the above request.

HDS2_DUMP_100111. (http://www.supershare.pl/?d=2C8783C32)

Serjoga
27-01-2011, 19:15
LISTA KANALOW OPENBOX S9 HD PVR.
POLSKIE,POLSKIE HD,SPORT,MUZYKA,BAJKI,XX...

HackTheNet
04-02-2011, 19:30
OpenBox S9 Modified L53 Dump.file with Channel List [01 February 2011]

OpenBox S9 Modified L53 Dump.file with Channel List [01 February 2011]
This is a modified L53 Dump file, and was released on [01 February 2011]
This L53_MOD Dump file is based on the latest firmware version [HDS2-11-01-02:0899CMT]

If you already have the previous L53_Dump file dated [10 January 2011] loaded, you may if you wish just load the updated channel list.

----------------------------------------------------------------------------------------------

Included in all the L53_MOD Dump files, is the latest L53 multi-satellite channel list.
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list
Also included is a constant cw file, which contains active Biss keys, mainly for use on 26E 10E 5E & 4W.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
A number of new or updated channels on various satellites added.
Re-organised channel list on various satellites.

I believe all the channels that caused rebooting problems, have now all been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
Click Menu -> Tools -> Upgrade by USB -> Set Upgrade Mode to Image File -> Upgrade File select HDS2_L53_MOD -> Now select Start and click YES to install.

If this is the first time you have uploaded a Firmware or Dump.file, then you will also need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your located in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Setup -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the list has been correctly added, by clicking Manage Config Files and clicking on replace.list if all went well, you will see the following example: X: {{ 1833 } { 1702 }}
================================================== =================================

How to add the Constant cw list.
Click Menu -> Network Setup -> CCam Client Setup -> Update Files by USB
-> Constant cw now click either the OK or Green button to select Constant cw and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the keys have been correctly added, by clicking Manage Config Files and clicking on Constant cw if all went well, you will see all the keys listed.
================================================== =================================
HDS2_DUMP_01022011.zip‎
DDL: http://www8.zippyshare.com/v/89260750/file.html

elgeneral
02-03-2011, 18:53
Latest Firmware

Added Greek language and so on
Optimise CCCAM and CS function
Optimise the reading card function

philippe146
08-03-2011, 04:34
Bin Openbox s9 solo Fta sat Americanos incluidos y soporte para Motor


Este es unn bin con los satelites y tps americanos ademas de soporte para Motor, para todos los canales libres que estan en HD dvbs-2 Y canales libres normales.

http://www.4shared.com/file/5rrUQu_c/HDS2_SatHawk_Motor.html

planko
13-03-2011, 06:31
These 2 last firmwares are killing even original "clones" openbox s9, i received mine yesterday, upgraded to the march firmware version, could use cardsharing, configure sats, channels, but when i tried to chance the background picture it has showed me

YOUR BOX IS CLONE VERSION!!!!

I have compared my box PCB with a original and a clone version and mine is same as original. I think this firmware is not working well choosing which boxes kill.

Now i'm waiting for a solution, i already have trying the recovery cable with lots of fw versions and nothing, no image.

Just On > boot > --

Pls Try upgrade your box with PC/Laptop via RS232 and use this original firmware
Hope this usefull!

Serjoga
29-03-2011, 15:02
New soft 1.08.94 from 03/23/2011

=========================================
History Release Note
=========================================


Common Problems 7101/7105/7110

1. T1 and T2 will appear in the list of services, invoked by the button Fav Single tuner model - fixed now Single tuner models only stayed icon T1

2. Fixed a bug of menu items USB power mode Stadby.

3. Added Portuguese language menu.

4. Changed french language translation OSD.

5. Changed Dutch translation for language OSD.

6. Fixed bug with hanging up the receiver when scanning specific transponders TP (12266 H 27500 Astra19).

7. Added a screen format mode Pan Scan 16:9

Openbox S6 and S9 (STi7105 and 7110)

1. Fixed a problem finding some TP from the satellite AsiaSat 3.

2. Fixed problem with displaying label WAIT OFF on the front panel display when recording in satndby.

3. Fixed bug in calculation of the time recording information.

4. Fixed problem with duplication of work Blindscan regime.

5. Fixed the problem of lack of control (hang) in Blindscan mode.

6. Added lists of U.S. satellites.

HackTheNet
29-03-2011, 23:26
Beware...No Skybox Soft.

Mvh Kalle

Here is the correct firmware for the Solomend HD-PVR800, INVEL HD PVR3612, SatHawk PVR800, OpenBox S9 HD PVR and SKYBOX S9 HD boxes:
http://www.sat-universe.com/showthread.php?t=205122 :thum:

Serjoga
05-04-2011, 07:54
L53 Openbox S9 Multi-Satellite Channel List v4.20 - [02 April 2011]



This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.

---------------------------------------------------------------------------

Just remember to allow your common sense to prevail .... and to always download the L53 files from the source [**********], as we can not guarantee the authenticity of our files if downloaded from another location, and also take the time to read the instructions contained within the zip file, of course if any of the original files are missing, or any extra files included, then the file have obviously been tampered with, in one way or another, and should therefore obviously be avoided, and not installed.

Each of our zipped L53 Channel List files, will consist of the following 4 files only:
1 .. TP_PROG.dbs
2 .. Constant file
3 .. Replace file
4 .. Channel List Instructions file.


The genuine checksum value for the files will be posted in the following: Firmware and Channel list sections.

You should verify each zip before unzipping and installing the file, otherwise we can not guarantee it, as it may have been tampered with in one way or another, the MD5 option is to ensure your safety.

If the checksum value do not match the Zip file perfectly then you should delete it, and download the genuine file.
THERES NO LOGICAL REASON FOR REMOVING, EDITING OR INCLUDING ANY FILES TO THE ORIGINAL ZIP.

This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.

Default Settings:
Channel list format: .dbs
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
Radio Channels: 0
Favorite Channels: 0

If used in an external channel editor, change extension from .dbs to .abs
once you have edited the channel list, change the extension back to .dbs
---------------------------------------------------------------------------

What's New:
Updated channels on various satellites including: 5w, 1w, 7e, 13e 16e, 21.5e & 28.2e.

I believe all the channels that caused rebooting problems, have now all been removed.

To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.

I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
Of course if you already have them installed, then simply ignore them.
---------------------------------------------------------------------------

Please Note:
To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.
To remove all channels, click Menu -> Edit Channel -> Delete All

To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.

Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.

elgeneral
07-04-2011, 23:04
firmware 110404

CHDS2-11-04-04

Changelog:
- improve the cardsharing about DRE-CRYPT,
- PROBLEMS about rebooting of paid channels,
- add softcam(patch)!

elgeneral
07-05-2011, 07:23
firmware 110506

CHDS2-11-05-05

Changelog:
- Optimize "read smart card function" for example, Viaccess 4.0,*** 2.0 , I***** 2.0, Conax 5, Sega ( i.e.Mediaguard 3) Nagra 2 and so on
- Add "FTP function', you can upgrade your software and files by internet,
including software, system file, TP_PRO.dbs, Cccam.cfg, softcam and so on
- It adds some key files, and optimize "patch"
- It adds several luanguage, i.e. Persian and so on
- Bomb--Kill the clone

elgeneral
11-05-2011, 20:20
S9 HD Firmware Openbox 11/05/2011

CAREFUL WITH THIS FIRM !!!!!!

Based in the firm of 06/05/2011.

- Support reading cards for Thailand and Malaysia.

- Support for FTP tool

- Identification of the decoder to know if it's original or clone


Steps to identify the deco:


1 - Back up everything.
2 - Update with this firm
3 - Go into Menu / information utility and press (ok), press 8888.

Now we'll see the Chip-ID (identification number)

If one of the following is original:
00D0
00EA
085B
0D0C
98A1
98F2
9CF4
9D1A


If not, or if you have doubts, DO NOT upgrade the firmware, and reset 10 times that to stay "locked" the decoder

gracias al amigo Cirus

elgeneral
20-05-2011, 05:53
OPENBX S9 Europe

5-19-2011

HackTheNet
29-05-2011, 09:03
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

****> Version vom 06/05/2011 ! <<<


The New Official China Firmware version do not include any channels.

Changelog: ?

DDL: http://www22.zippyshare.com/v/29196834/file.html

Serjoga
30-05-2011, 18:24
NewCamd List Usb Update - Openbox HD S9

NewCamd List Usb Update

Go to:

Menu;
Tools;
Upgrade by Usb;
Upgrade Mode-Misc Files;
Select&Upgrade(ok);
NewCamd.list(MGCamd Plug);
Yellow to upgrade

Serjoga
11-06-2011, 20:11
list dated 5/6/2011

Bouquets:
-DIGIT
-POLSAT
-N
-***
-XXX
-HD
-GERMANY

by MAX

Serjoga
17-06-2011, 14:46
Openbox S9 CONM_C2DS2_America.abs

The manufacturer says:
Openbox S9 ONM_C2DS2_America.abs

1.updated mediaplayer to support some video formats--VCD(MPEG1),DVD(MPEG2),AVC,MP4(H.264)
2.modified multi-cas read cards.and menu to disable EMM.
3.add Indonesia language
4.updated Slovak language,add Czech language
5.updated Russia language,add Persian language
6.modified some biss encrypt to decode biss channels
7.added C Band LNB local frequency:3620MHZ
8.added local time setting ---- bangkok/jakarta GMT+7 .
9.added patch to support softcam.key format.
10.modified some HD channels playing reboot problems
11.modified background connect to internet
12.add to 32 FAV list
13. Add HDMI and AV output at the same time

Edo2
18-06-2011, 13:56
New firmware 17/06/2011 Europese versie

main features are as follows:

1.updated mediaplayer to support some video formats--VCD(MPEG1),DVD(MPEG2),AVC,MP4(H.264)
2.modified multi-cas read cards.and menu to disable EMM.
3.add Indonesia language
4.updated Slovak language,add Czech language
5.updated Russia language,add Persian language
6.modified some biss encrypt to decode biss channels
7.added C Band LNB local frequency:3620MHZ
8.added local time setting ---- bangkok/jakarta GMT+7 .
9.added patch to support softcam.key format.
10.modified some HD channels playing reboot problems
11.modified background connect to internet
12.add to 32 FAV list
13. Add HDMI and AV output at the same time

Serjoga
19-06-2011, 06:55
New software from 09/01/20 17.06.2011 Openbox S9

Read more ...

The plugin is able to download from a Web server
Menu - Utilities - Plug-in: Blue Button - download
Server URL: Menu - Installation - Network Setup: Server Firmware Update
Multipicture mosaic Funtion bug, as amended (Blue button)
Blind Scan search wrong: Amended
Dubbed the channel or other errors in the blind scan Solved
CH sky portal problem: Solved
Hang up when they do 10 minutes pause playback file REC: Solved
Daily EPG write error: Solved
Work screen saver during playback Service Radio: Solved
Unable to delete a specific file Rec Bug (file name includes / or special characters): Solve
Unstable signal quality: Solved
Black background issue in the name of the event Information Banner: Solved
Record the names are stored as the old name of the event in case of a scheduled recording: Solved
Question hangs after a reset to factory defaults: Solved
Hangs on the menu Data Transmission: Solved
If you change the service up / down, the loop is maintained in a tuner: Supported
Logical channel number (LCN) function off: Amended
Audio noise click: Solved
Lost in the recording of descramble specific channels: Solved
I can not write to the service nemed in Turkish: Solved
Tools to find the option in the list of Service Manager: added (yellow button)
Spilit menu screen or broken: Solved
The screen turns to black and white mode, change the resolution: Resolved
Flickering screen and place in a Scart to edit mode, resolution: Resolved
2 hours before the screening time EPG DATA open EPG data stored on your hard disk: Solved



NOTE: YouTube and the Web browser pre-installed!

Edo2
21-06-2011, 18:00
Openbox S9 PVR Software-Azja-NEW

Openbox S9 PVR Software-Amerykańsko-NOWY

Openbox S9 PVR Software-Europa-NOWY

Benkurd
23-06-2011, 15:29
Firmware Openbox S9HD Europe 23/06/2011

Tested by me s*y Deutschland is working
B***** at 39 east working
C*Nl at 19.2 Working with new softcam will upload soon
All CRYPTOWORKS providers working

have fun

Benkurd

gpelekanos
28-06-2011, 15:20
Openbox S9 PVR Software-Azja-NEW

Openbox S9 PVR Software-Amerykańsko-NOWY

Openbox S9 PVR Software-Europa-NOWY

many thx :)

grisu72
30-06-2011, 11:24
Thanks! Can the Mediaplayer be updated to watch avi fils???

JAKITAKI
30-06-2011, 18:25
OpenBox_S9_Europe_Version 30.06.2011

- no information what's new ;)

coxanita
30-06-2011, 23:34
OpenBox_S9_Europe_Version 30.06.2011

- no information what's new ;)




1. Solving rebotting problem when we watch channels by CCCAM account

2.Solving the channel freezing problem when the volum set up or dowm

3. Solving subtitle changing problem

(Notes: please come into "language" menue, and setup the favourite language under "teletext",

then the subtitle will default the corresponding language

4. the customer can change the logo m2v by themself

elgeneral
03-07-2011, 13:22
OpenBoxS9 /OpenBoxS10 Firmware 07012011

Firmware 07012011 - Released to all!

In a big departure from our previous releases, our latest OpenBox S9/S10 release is available to all to download. Our private S9/S10 firmware will be receiving a completely new database and other information soon, so all are welcome to this file and its data, as long as both are distributed complete and unmodified.

However, if you modify this file or strip the data and then distribute it, we will not waste time threatening or filing lawsuits. We will simply go to your host with an International Copyright/DCMA legal filing and have your site removed from the internet. Has worked very well sofar in USA, Canada, EU and Asia.

This file works for S9 and S10. The main difference is that S10 clock/timer works, S9 it still does not. Many other improvements have been made

If you are in EU, don't bother, this is for North America. If you are a pirate, don't bother. Not only does this file include our anti-pirate measures, there are no plugs from the factory!

* Audio sync issues corrected
* Stutter on many H264 and other feeds corrected, smooth playback
* Sluggishness in menus and other operations corrected
* Clock/Timer works
* Old TP_PROG.DBS files now work
* Tuner check eliminated
* VFORMAT now cycles thru NTSC and PAL modes, will not get stuck in PAL with no picture. Keep pressing VFORMAT, wait 5 seconds & repeat until back in NTSC mode.
* ALi DVR format eliminated, now records selectable PS or TS. No need for PVR Tool
* Can output 1080i and 480i analog at same time without “nag” message
* North American version that includes MP4/MPEG2 Media Player, Record Manager
* Slightly improved blindscan speed over 0617 with Spitfire/Universal, but still needs work.
* S9 style layout, with OpenBoxS10.info backgrounds coded as boot and background from factory engineer (not changeable).
* Eliminates Plugs

Does not fix/known issues:

* No independent 22kHz. (Workaround coded into OUR files with slower blindscan for Spitfire/Universal.)
* Eliminates CAM controls (not needed by 99.9% of N.A. users, for subscription programming. If you need this, we can enable it.)

Special notes:

* If using older TP_PROG.DBS file with our default settings of 10600/22kHz, you must switch these to Universal 9750/10600

* Clock settings are pre-set in OUR file. Only change the date and time, don’t touch region or GMT usage. Date will be set to 01/11/2010 (EU format, day first, then month). Time is 24 hour (military format) and will be set at 00:00 (12:00am)

* As with our past files, default resolution is 480i. If using HDTV please change to 1080i_60 or 720p_60.

HackTheNet
10-07-2011, 12:17
Settings Solomend HD-PVR800 / Openbox S9 multi-sat channel list [14 May 11] v4.40

L53 Openbox S9 Multi-Satellite Channel List v4.40 [14 May 2011]

This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.

---------------------------------------------------------------------------


This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.

Default Settings:
Channel list format: .dbs
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
Radio Channels: 0
Favorite Channels: 0

If used in an external channel editor, change extension from .dbs to .abs
once you have edited the channel list, change the extension back to .dbs
---------------------------------------------------------------------------


What's New:
Updated channels on various satellites including: 13e, 19.2e, 23.5e & 28.2e.

I believe all the channels that caused rebooting problems, have now all been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.

I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
Of course if you already have them installed, then simply ignore them.
---------------------------------------------------------------------------


Please Note:
To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.
To remove all channels, click Menu -> Edit Channel -> Delete All

To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.

Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
when you see a check mark or tick next to the TP_PROG, click the yellow button to install.

Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.

============================================
New settings for TRING.
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.

Eutelsat W2M [16E]
11.283
V
27500
5/6
============================================

ITV 3D [Testing] New
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.

Astra 2B [28.2E]
11.973
V
DVB-S QPSK 27500
2/3
============================================

BBC HD & ITV HD Updated
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.

Astra 2D [28.2E]
10.847
V
DVB-S2 QPSK 23000
8/9
============================================

Download: http://www49.zippyshare.com/v/80613216/file.html

elgeneral
11-07-2011, 18:50
Openbox S9 software for Europe

2011-7-10


Openbox S9 PVR Channel Editor

NEW!(2011-7-10)

elgeneral
13-07-2011, 19:44
Openbox S9 PVR Software

2011-7-13

samkooke
22-07-2011, 18:43
hello new firmware for openbox s9


Edit original file skybox s9

Serjoga
31-07-2011, 20:17
Works corect sound the channels change.

HackTheNet
08-08-2011, 21:29
Orginal Firmware File Skybox S9 from 08/08/11

Orginal Firmware File Skybox S9

Firmware for S9 HD PVR 08/08/11

No details on what's new

Serjoga
15-08-2011, 16:01
no new firm!!

parch 14.08.2011 with settings richter

Serjoga
15-08-2011, 17:14
Firmware Openbox S9 15.08.2011

Skybox S9-S10HD Firmware (11/08/15)
Latest Skybox S9HD Firmware (11/08/15)

According to the feedbacks from customers, the new software mainly improve :

1.modified DiSEqC1.2 motor bugs.

2.add 95E satellite IPM (NSS6) patch agian .

3.modified CCCAM multi accounts connect servers bugs.

4.modified some CA smartcards EMM Autoupdate.

5.modified Thailand language EPG!

Serjoga
21-08-2011, 17:04
PKT OB S9 E2 HAARP v2 Image 20-08-2011 - USB, SATA, Flash


Enigma2 OpenSource SH4 Duckbox Project GIT-2645 PKT mod SVN-1064 HAARP v2 Image


Image is designed for installation in Flash/USB/SATA devices
Support receiver: Openbox S9, Atevio 7500HD or other clones

Added by sh4 Duckbox Team:

- [stm24] added lzma patch for squashfs
- [stm24] ext4 can now be used for ext2/3
- [make/ffmpeg] - updated ffmpeg 0.6.1
- [multicom-3.2.4_rc3] add new multicom driver
- [eplayer3] playback aac-he streams with aac-lc
- adding opkg binary to default build
- fix timing problem in filepush
- [Player2 179/191] possible fix for chopped DTS sound on some files
- [e2 nightly-0]introduce 3D Mode for OSD ( paint OSD twice in Side by Side or Top and Bottom )
- [libeplayer3] support for OSD 3D modes for subtitles
- [libeplayer2, libeplayer3] Close directory file handles after looking for subtitle files
- [stm24] added squashfs-tools 4.0 lzma patch
- add busybox 1.18.5 stable
- extend streamproxy to support linuxdvbapi5
- [player2_191/player2_179]resturucture dts fix. The fix now only applys to DTS streams and the playback time is only corrected on time differences up to 50ms this MAY fix some issues with async sound

Added by PKT:

- first build on stm24 kernel
- add new WebInterface v 1.6.7
- add cardreader support
- new function "live ecm" in infobar
- update e2 to 2011-07-06-experimental
- 10% faster switching channels
- show Channel Number on Front Pannel + ON/OFF in setup menu
- upgrade CrossEPG svn 268
- fix qwerty VirtualKeyboard
- fix Backup/Autorestore function | LABEL=RECOVERY required
- fix channel number showing on VFD if long channel name
- set home directory to /root
- EPG description on channel list -> ON
- change reading of ecm.info
- new converters and skins modifications
- fix dimmer action when channel switch
- fix parsing PROV, CAID, PID
- Enable autofs support
- moving EPG support to KeyMapper
- ReferencePKT optimization
- set PKTGoldHD as default skin
- fix CIFS mount if passwd is empty
- PKT Channel Control v1.03: store Aspect Ratio separate on each channel
- MPlayer fix GS of EOF
- new InstallManager 1.0.6: new visualisation of install process. After format there is ability to abort installation process (this option is limited to 1 minut after start installation ) and also possibilty to change volume level while installing new image
- upgrade formating device in Install Manager
- update API of MyTube based on last CVS source
- update EmuManager v1.0.6: add sh4Cam support & gbox fix
- DTS Downmix Disable fix
- set cleanupwizard.enable=false
- update font fix
- remove unnused files or many BP menu settings modification
- res_emu in standby add in BP->Settings
- tune and fix sys_info
- add showing /Loaded modules/ in BP ->Menu ->System
- update WIFI scripts:
* add detecting of supported USB WLAN adapters
* user is informed about unsupported device
* optimize selecting WLAN driver
- [SF1028 | UFS912] add info about extended partition usage in sysinfo when flash Image is running
- update plugins feed


Advice:
When Image is installed in the flash device - BP->Settings->SpeedUP Tool is recommended to increase amount of free space.
Included Flash Image (.ird) default is set to SF-1028P reseller ID. Before Flashing check Your receiver and change reseller ID if needed.
To change reseller ID we recommeded IRD Resseler Changer for AT7500 from AAF Team.


http://www.megaupload.com/?d=59Q7A19X

Serjoga
22-08-2011, 06:45
Lista OPENBOX S9 & S10 by INFALLIBLE 21-08-2011


List & Astra HotBird

It includes all the channels were 3 Polish Platform:
1st Cyfrowy Polsat
2nd Canal +
3rd N iti

Divided thematically to refer to the following groups:
1st POLISH
2nd FULL HD
3rd INFORMATION
4th FILM
5th SCIENCE
6th COMEDY
7th MUSIC
8th SPORT
9th XXX

bozomustafa_68
01-09-2011, 10:51
SKYBOX_S9_110824

HackTheNet
02-09-2011, 20:31
Openbox S9 New Firmware 30.08.2011.

Changelog:
New software has been released, made ​​the following optimization:
1 Shows a list of programs to increase 3.
2 Optimize the sound noise problems.
3 Optimization CCCAM chain scission restart problem.
4 Quick-change restart optimization problem.
5 Optimization *** reader questions.
6. Kill the clone

*** Support

DDL:
http://kiwi6.com/file/6u3o1i5544

HackTheNet
03-09-2011, 14:28
Openbox S9 New Firmware 30.08.2011.

Changelog:

New software has been released, made ​​the following optimization:
1 Shows a list of programs to increase 3.
2 Optimize the sound noise problems.
3 Optimization CCCAM chain scission restart problem.
4 Quick-change restart optimization problem.
5 Optimization *** reader questions.
6. Kill the clone

*** Support

DDL: http://www.multiupload.com/3VMFZOBWTJ

bozomustafa_68
11-09-2011, 08:21
Dump Openbox S9 Hd - 70ºw Tia Hd


*Dump para Openbox S9 HD 11/09/2011.
*Firmware 08/2011.
*Canais e TP´s atualizados dia 11/09/2011.

bozomustafa_68
14-09-2011, 15:45
Openbox S9 14.09.2011.

HackTheNet
16-09-2011, 13:23
Openbox S9 New Firmware 14.09.2011.

What's New:
In version [SkyBox_S9_110914]
Skybox/Openbox/Solomend S9 Firmware 14/09/11

Confirmed Ver: SkyBox_S9_110914

Regrading the new software dated September 14th 2011, its main improvements are the following:

New software has been released, made the following optimization:
- No details but working!
- HDTV ok
- Box also bootup by RC (wait min 30secs after shutdown by RC!)

DDL: http://www.multiupload.com/TR2R0IWGA0

bozomustafa_68
19-09-2011, 06:54
OPENBOX_S9_110915

bozomustafa_68
06-11-2011, 13:17
Dump S9 HD 43º + 61º + 70ºKU + 70º Banda C

bozomustafa_68
21-11-2011, 08:10
OPENBOX_s9_avatarcam.

pocgoc
07-12-2011, 15:53
1* normal
2* movies
3* sports
5* drama
6* kids
7* documentary
8* music
9* news

You may have to go into antenna setup and turn motor off as its set on usals.

#/Before installing, go to menu-edit channels- delete all,
#/Then reboot.
#/Install mine.
#/Reboot.

http://www.mediafire.com/download.php?2ehb9i1kv7iu3l5

1caro
08-12-2011, 21:48
SetEditHD100

Version 1.22
-You can add, 32 favorite groups

Hello, the software is being tested, you would not crack?
given that since version 1.20 has the fix for openbox S9, how can I use the most?
thanks

JAKITAKI
08-12-2011, 23:26
Hello, the software is being tested, you would not crack?
given that since version 1.20 has the fix for openbox S9, how can I use the most?
thanks

to buy the licence ;)

bozomustafa_68
09-12-2011, 14:14
HDS2_OPENBOX S9(20111202)

Serjoga
24-12-2011, 08:50
deep_c2ds2_cmt_1112130641

JAKITAKI
24-12-2011, 13:26
deep_c2ds2_cmt_1112130641

processing firmware is s10 of matching s9 13/12/2011
MENU is already open for s9
To get to the network settings you must enter the menu and remote control 4x6 then punish the Network Setup!
To get to
CCcam Client Setup-4x0
MG CAMD Setup Plug-4x0
Newcamd Server Setup-4x0
After turning off the remote control box on display shows off that does not go out and probably does not enter into standby for no LED is off or the clock instead of which I can not run. When you press the POWER button on the remote control appears on the display ON BOOT box and then starts up normally.:):):)

JAKITAKI
06-01-2012, 00:32
HDS2_S9_by_anonymouSX

For Clone Openbox / Skybox S9

September version :) with Clone TimeBomb Disabled and some other fix .

Fixed by anonymouSX 5 jan 2012

fixed Timebomb kill clone
Id detection fixed
Reboot probleme fixed
Cccam lag freeze Fixed
Standby Freeze issue Fixed
Power on Message on Display Changed

i need your feedback so you know where i'm :)

AnonymouSX developer on forum.Ouedkniss.com

thanks to EliteForce helped me to understand cpu ali 3602

World First Firmware hacked for Openbox S9 ali 3602 .

all futur release on forum.Ouedkniss.com


Best Regards

AnonymouSX

HackTheNet
10-02-2012, 21:59
HDS2_Openbox_by_anonymouSX_V2_New_Red_GUI

For Clone Openbox / Skybox S10 CCCAM SOftcam Mediaplayer Mkv AVI VOB ect.. support

New GUI menu Red Version with Clone TimeBomb Disabled and some other fix .

This Version Make the Original Openbox Firmware cheaper Welcome In 2012 .

Version AnonymouSX V2 FOR S9/S10/S11

Fixed by anonymouSX 02 feb 2011

fixed Timebomb kill clone
Id detection fixed
Reboot probleme fixed
Cccam lag freeze Fixed
Standby Freeze issue Fixed
Power on Message on Display Changed

AnonymouSX developer

thanks to EliteForce helped me to understand cpu ali 3602

Special thanks to my friend satsonne for this bitmap design

Thanks to my Beta Tester's mbtexascity and ipsgyn

You can support me i need some stuff for making new Firmware's .

Best Regards

With love AnonymouSX

Bilder:
http://img528.imageshack.us/img528/1141/img20120203002423.jpg
http://img403.imageshack.us/img403/188/img20120203002438.jpg
http://img19.imageshack.us/img19/2475/img20120203002501.jpg
http://img267.imageshack.us/img267/9375/img20120203002534.jpg
http://i.imgur.com/AcWX0.jpg

Download: http://mir.cr/DTONB11Y

JAKITAKI
15-04-2012, 09:45
INET_HD_s12_PVR

works with S9

http://s16.postimage.org/xh6aa4rpv/frame_0x0_CDE0080_0x0_CDED0_FA.png

bozomustafa_68
10-05-2012, 17:07
Openbox S9 software

magictails
14-05-2012, 15:29
Openbox S9 software


DEEP_C2DS2_CMT_1112130641 (S10_S9) test

new style like blue color

MENU Open for s9
To get to the network settings you must enter the menu and remote control 4x6 then punish the Network Setup!
To get to
CCcam Client Setup-4x0
MG CAMD Setup Plug-4x0
Newcamd Server Setup-4x0
After turning off the remote control box on display shows off that does not go out and probably does not enter into standby for no LED is off or the clock instead of which I can not run. When you press the POWER button on the remote control appears on the display ON BOOT box and then starts up normally.

magictails
19-05-2012, 00:49
INET_HD_s12_PVR

works with S9

http://s16.postimage.org/xh6aa4rpv/frame_0x0_CDE0080_0x0_CDED0_FA.png


hi

wolf jpeg boot

12 list favoris

astra 19 & hotbird 13 channel list

emulation only I2 & crypt*work ; biss ; dcw key


@+

HackTheNet
28-06-2012, 22:21
new s9 fiirm C2DS2_CMT_120620044F

not tested

Download:
C2DS2_CMT_120620044F.zip
http://www66.zippyshare.com/v/25609407/file.html

bozomustafa_68
30-06-2012, 09:35
Skybox/Openbox/Solomend S9/S10/S11/S12


MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

HackTheNet
10-08-2012, 23:24
Europe-S9_S10_S11_S12-20120801 AnonymouSX V2B: 0481

problem with
TP_PROG.dbs when booting from flash. It is better to pour on the
toolom competence in ABS.

OR MY bakup

HDS2_DUMP_TELEKARTA_STANDART_85e_AnonymouSX

S9 3 days for normal flight. In no clone did not test.

gracias a AnonymouSX

Neue AnonymouSX Firmware hier:

http://www.sat-universe.com/showpost.php?p=943076&postcount=32

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum