Lastest Enigma2 Image for Azbox HD

Doctor Who
21-09-2010, 02:53
Pre-announcement for loading Enigma 2 in AzBox HD Elite / Premium devices by USB Memory stick and this method is 100000% RISK FREE !!! As the new beta image will follow in next hour(s) .

Thanks to the the_ripper, telesat, Darezik and other people involved in this project.

If You want to load this version of Enigma 2 for AzBox HD Elite / Premium please follow this procedure :


1 . Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick


2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.


3. Follow the procedure USB Update on the screen, after process is finished, remove the USB stick from the AzBox HD Device, and let AzBox HD to Reboot


4. After reboot is finished, You should be in Enigma 2 AzBox HD Running state


5. If You tested enough Enigma 2 on AzBox HD Device and want to be back on AzBox Official Firmware, it is piece of cake


6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official AzBox HD Firmware e.g 0.9.5020 ) .


7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, and Turn it on.


8. On VFD You will see RESCUE MODE and IP Address will be listed.


9. On Your PC run application called AzUP by our team member telesat, enter IP of Your AzBox HD Device and click on UPDATE


10. Wait that Update is finished, and You will have again AzBox HD Official Firmware


This is totally RISK FREE Installation and Recovery procedure for AzBox HD Elite / Premium Devices !!!

Please, just follow procedure, and You will not have any problem at all, as this procedure was tested many many times internally by our team.

DOWNLOAD enigma2 v1.0.21 (http://www.megaupload.com/?d=87MTTM09)

houarisat
21-09-2010, 16:44
Enigma 2 for AzBox HD Elite

If You want to load this version of Enigma 2 for
AzBox HD Elite / Premium please follow this procedure :

1 . Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB
Memory Stick


2. Turn Off Your AzBox HD Device, put USB Memory Stick inside
and Turn on AzBox HD Device.


3. Follow the procedure USB Update on the screen, after process
is finished, remove the USB stick from the AzBox HD Device,
and let AzBox HD to Reboot


4. After reboot is finished, You should be in Enigma 2 AzBox HD
Running state


5. If You tested enough Enigma 2 on AzBox HD Device and want to
be back on AzBox Official Firmware, it is piece of cake


6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official
AzBox HD Firmware e.g 0.9.5020 ) .


7. Turn Off AzBox HD Device, put USB Memory stick in Receiver,
and Turn it on.


8. On VFD You will see RESCUE MODE and IP Address will be listed.


9. On Your PC run application called AzUP by our team member
telesat, enter IP of Your AzBox HD Device and click on UPDATE


10. Wait that Update is finished, and You will have again AzBox HD
Official Firmware


This is totally RISK FREE Installation and Recovery procedure for
AzBox HD Elite / Premium Devices !!!

Please, just follow procedure, and You will not have any problem at .
all, as this procedure was tested many many times internally by our team.
Important: The installation of the image takes on its
own responsibility
Download image 44MB
(http://www.file-upload.net/download-2835721/E2_1.0.21_elite_premium.rar.html)

Doctor Who
20-10-2010, 01:12
Enigma2 versione 1.0.25 per AZbox

Dear friends of this great community, and proud owners of AzBox HD Devices ( currently only Elite/Premium supported ) there is new version of Enigma 2 by the_ripper and team for You :

Download:

http://rapidshare.com/files/426062706/E2_Update__1.0.25.rarWhat is new ?

- FTA SD and HD channels working. ( DD 2.0 , AC3 working by HDMI tested on Einsfestival HD )

- New IR driver ( few more mapped buttons e.g Info button, Audio selection is Check button on RCU )

- Fixed Section filters and PID selection.

- Added part of CA system

- Multimedia support for MPEG2 , MPEG4 ( XviD ), h264, and various audio support.

- Please read ReadMe file if You want also to install additional things to get working Multimedia by Media Player in E2.

- If You have Full HD TV , You can set resolution by editing bootup file located in :

/etc/init.d

Find line :

# Elite and Premium

below You will see line insmode ...

and replace existing insmode line with this one :

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0"Few tips :

Before loading Enigma 2 , move Your dish to some satellite ( Astra 19.2 e is good because of FTA HD channels ), as on E2 currently we didnt fix DiseQc bug ( We will fix it when we finish Premium+ driver ).

Try to use Simple configuration in Tuner Configuration, e.g choose satellite on which position currently You are.

README for MULTIMEDIA :

If You want also to test Multimedia on AzBox Enigma 2 media player , You have to install 3 IPK files located in this archive :

gst-plugin-asf_0.10.16-r0.0_mipsel.ipk

gst-plugin-avi_0.10.25-r0.0_mipsel.ipk

gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk

working formats:
audio: mpeg, aac, ac3, dts, wma (but not pro), pcm (not all ?)
video: mpeg2, mpeg4 (xvid), h264 (only show singe frames)

IPK Installation procedure :

Transfer 3 *.ilk files to /tmp folder of Your AzBox and run this commands, one by one :


ipkg install /tmp/gst-plugin-asf_0.10.16-r0.0_mipsel.ipk

ipkg install /tmp/gst-plugin-avi_0.10.25-r0.0_mipsel.ipk

ipkg install /tmp/gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk


If You cant use ipkg install, use command opkg install or ipkg-extract .

Link Megaupload

http://www.megaupload.com/?d=L557AOVO

hilton
24-10-2010, 04:08
versione 1.0.26 by the ripper

Dear friends,

Enigma v1.0.26 by the_ripper and team

What is new :



Download:


E2_AZBox_1.0.26.rar (www.azbox-enigma.eu/upload/E2_AZBox_1.0.26.rar)

Doctor Who
24-10-2010, 20:39
ecco la nuova versione

Enigma 2 v1.0.27

Devices suitable for flashing : Elite and Premium

What is new :

- DiseQc FIX ( 1.0 , 1.1 , 1.2 Manual and USALS too )

- DVB-S2 FIX

- Integrated BlackShadow2 skin by Matrix10

- Fixed boot error


ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!

DOWNLOAD LINK http://www.megaupload.com/?d=VW6A8GDI


pls read readme.txt included in E2_AZBox_1.0.27.rar archive
___________________________________________________

How to use AZUp
Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App :)))) realy funny because AZUp manage partitions of your AZBox ;)
Ignore quasi instructions and use this official instruction from the author of AZUp


We have 3 situation :
I) You have Official FW in your AZBox andyou want to install E2
II) You have E2 in yourAZBox and now you want to install official FW
III) You have E2 in your AZBox and now you want to install new/update of E2


I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


II) You have E2 in yourAZBox and now you want to install official FW

Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)



III) You have E2 in your AZBox and now you want to install new/update of E2

Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


rgs,
telesat

Questa Ŕ una notizia che in molti attendevano.......

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.

A questo punto altri team potranno lavorare per personalizzare l'immagine e per gli utenti ci sarÓ solo vantaggio

gorski
25-10-2010, 18:05
Firstly, it's a complete package, more or less, no need for many additional "operations", changing of files at a specific time of the flashing process and what not. That previous attempt was quite messy and not at all looking good! This one is... well, getting there!

Secondly, the AZUp is now - finally - functioning relatively well. I only needed to reboot once and restart AZUp, in order to flash E2. That eventuality should have been in the Readme, too. The flashing is slow but it does the job and that's good enough fo me!

The "How to" that comes with AZUp is also a little bit more serious, not totally amateurish... This time round some time was taken to actually test and write it down, step-by-step, not like before with a number of steps missing, giving people a headache, sometimes giving them a really hard time, because the author was feeling lazy and irresponsible....

The_Ripper's part of the job, however, is looking much better than the teams, I have to say. Some real progress has been made, from what I can see!

Finally, I was able to:

1) get a signal with my DiSEqC Centauri 16in1 switch and advanced tuner configuration, with DiSEqC v. 1.1, changing just the "uncommitted" command, command order and LNBs;

2) scan pretty well, most of my satellite positions.

What didn't go that well? (I will skip the obvious, like remote buttons not being mapped out yet, no Standby etc.)

A) The machine needed to reboot a few times, 'till I finally got the signal and was able to scan. In other words, E2 is not yet stable, as was expected.

B) Sometimes it boots partially, so one gets pictures but no sound or the signal is quite poor, the picture is blocky and so on. On some channels/sat positions [Iran Music on HB] audio works but on others it doesn't [BBC on Astra2 or on Thor].

Once it all loads properly, one can scan and zap and so on. But one better be patient, in order to get there! And you still won't get it all, as I saw but couldn't hear, frequently.

The machine also froze a few times, as I was trying to zap.

I have a feeling the original FW was able to scan more channels - but I have to run some tests to confirm. Have to go back to original FW, scan and compare.

E2 didn't find anything on 16, 10 & 7'E, 4, 8, 12.5, 15, 18, 24.5 and 30'W.

But it's not entirely E2's fault! The whole thing is not a happy affair, as I have trees with leaves still on them, so grrrr... as they are obstructing the view... On top of that, in Scandinavia Earth has a 4% wobble, so some satellites that were barely visible get out of focus for like 6 months a year, which makes it doubly frustrating sometimes...

The HDMI = DVI, it seems to me. It doesn't give the 1080p option, yet, I'm afraid.

One must go through many menus and activate, for instance, "Multiple Bouquets" option...

AZ HD display isn't showing anything other than "100".

Having done all that I haven't had the time yet [or sleep, for that matter], to test any "plug-ins", of ANY kind... L8r...

Mind, when will they be available, on a support server, please? Emus and all the rest of it, of course...

Going back to original FW 4890 was a smooth affair, using AZUp v. 1.1, with an IP address + one command to "update". Once it copies the old kernel you can close AZUp and proceed with the usual procedure...

Cheers!

G

P.S. If this:

Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App :)))) realy funny because AZUp manage partitions of your AZUp ;)
Ignore quasi instructions and use this official instruction from the author of AZUp...is a feeble and unintelligent, petty little attempt at a stab at me - it's laughable! You will NOT find any such instructions ["must use", "must format apps area"] in whatever I wrote. So, this speaks of the speaker, not of the addressee... and it speaks volumes, loud and clear... Create a straw man, in order to "valiantly" and "masterfully" do battle with this "monster"... Boy, you're a champ! [For crying out loud, grow up!!! :rolleyes:]

aguda
26-10-2010, 14:51
Enigma 2 v1.0.28

Devices suitable for flashing : Elite and Premium

What is new :

- Fix for no signal on DVB-S2 tuner for some users
- Multimedia fix for various formats by sattomy

Download





E2_AZBox_1.0.28 (http://azbox-enigma.eu/upload/E2_AZBox_1.0.28.rar)



ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!

juli13
28-10-2010, 07:47
28/10/2010

Enigma 2 v1.0.29

Devices suitable for flashing : Elite and Premium

What is new :

- MyTube plugin (YouTube)
- Multimedia fix for various formats by sattomy

DOWNLOAD IMAGE
http://www.fileserve.com/file/msKuyN5

elgeneral
01-11-2010, 03:52
Enigma 2 v1.0.30

Devices suitable for flashing : Elite - Premium - Premium+

What is new :

- P+ tuner driver tested

- P+ FAN control enabled and activated

- some fixes in audio - volume control now is ok, mute/unmute also

- plus few more fixes

http://www.azbox-enigma.eu/e107/e107_images/newspost_images/welcome.png

Download Enigma v1.0.30 (http://azbox-enigma.eu/upload/E2_AZBox_1.0.30.rar)

gorski
01-11-2010, 16:52
This is important for everybody who use the last enigma2 1.0.30

By The Ripper

Hi guys,
go to rescue mode ,telnet to receiver and mount DOM, for example

#/>mkdir DOM
#/>mount /dev/hda1 /DOM

then FTP to receiver and replace file /DOM/lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko with one attached with this message.

Then just reboot.

aguda
02-11-2010, 02:55
azbox E2_AZBox_1.0.31

Devices suitable for flashing : Elite - Premium - Premium+ - Ultra

What is new :

- Added support for DVB-S2 Tuner in Ultra model

- Volume UP and Down Mute and Un-Mute for all models

- Few more fixes

Download (http://azbox-enigma.eu/upload/E2_AZBox_1.0.31.rar)

juli13
22-11-2010, 08:44
RTi core 1.0.0 BETA

22/11/2010

What is new :

- Audio Fix - Fully fixed. by the_ripper

- HDMI Hotplug Fixed by the_ripper

- AzBox VFD Functionallity ( SETUP -> SYSTEM -> AZboxVFD for setup ). by DDamir

- Standby functionality FIXED by DDamir

- Multimedia Player Support ( Support for Various media formats ) by Sattomy

- SubtitlePlayer 3.0.2 ( Exclusivity, as SubtitlePlayer 3.02 is only accessible currently on AzBox HD ) by DDamir

- CrossEPG Plugin Integrated

- WebInterface AzBox HD ( Automatic selection of RCU on Web Interface Elite / Premium RCU ) by DDamir

- USB drivers support for Keyboard and Mouse by joseba


- Channel list by Daconi

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2 by telesat to Flash this new RTi core 1.0.0 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

DOWNLOAD IMAGE
http://hotfile.com/dl/84150619/d9a3fba/RTi_core_1.0.0_BETA.rar.html

Daconi
24-11-2010, 05:38
RTi core 1.0.1 BETA RTi core 1.0.1 BETA



What is new :



What is new :

- Fixed Audio sync ( now all should be ok ).

- Fixed HDMI Hotplug

- Fixed Web Interface

- Fixed Volume UP


More to come :

Work on recording and subtitles, Online software update ( Drivers and System components )

Currently under work :

- Fix for Multimedia


Download:
http://hotfile.com/dl/84592448/5dd937d/RTi_Core_1.0.1.BETA.rar.html

elgeneral
01-12-2010, 07:27
RTi core 1.0.2 BETA


What is new :

- Improvements on Audio part ( syncing )

- Card reader driver support ( /dev/sci0 ) EXPERIMENTAL

- Multimedia support ( Seeking OK, Play/Pause and Stop Ok, Audio sync )

- Wifi support for Premium/Premium+

- Time fix on VFD and Enigma 2

- HDMI Hotplug Fixed

- Fixed problem with jumping of 2 spaces on Multimedia player

- Online Software update ( drivers and python components from azbox-enigma.eu server )

- Password problem Fixed ( You can change password now )


WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.1 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***


Download:

RTi core 1.0.2 BETA (http://www.azbox-enigma.eu/upload/RTi_Core_1.0.2.BETA.rar)

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

elgeneral
14-12-2010, 08:23
RTi core 1.0.3 BETA Image based on : Enigma 2 from 04-12-2010

New kernel by the_ripper

What is new ?

- Applied New Audio FIX

- Interlace/Deinterlace FIX

- Fixed 30% CPU BUG ( Better stabillity )

- Better VFD Support

- Volume UP/Down fully fixed

- Fixed System clock

- Better overall stabillity

- A lot of changes on Enigma 2 ( A/V Settings EXPERIMENTAL , Welcome w i z a r d )

- Fixed Multimedia ( MKV, AVI ) now OK

- A lot of other small fixes and changes internally

We hope that next release will be RC1 ( Release candidate 1 ) as Recording and Subtitles are in internal Testing phase.

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.3 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2.5 ***

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

http://www.azbox-enigma.eu/e107/e107_images/newspost_images/welcome.png

Download RTi_Core_1.0.3.BETA.rar (http://www.azbox-enigma.eu/upload/RTi_Core_1.0.3.BETA.rar)

hfmls
27-12-2010, 03:27
What is new :

- New Kernel with better stability improvements.

- New Overclock driver for SAFE overclocking of Sigma SMP8634 CPU up to 370 MHz .

( Overclocking is done On-Fly with step up size of 10 MHz, and this is VERY SAFE Method which allow You to overclock CPU of Your AzBox up to 370 MHz ,

if something goes wrong, on reboot there are routines which will reset CPU to default clock, so nothing can happen ).

- Fixed A/V Settings, VFD and Standby plugins are separated now.

- New Mediaplayer files, so DVD .iso and .ts files are supported now.

- Overall stability and speed of Enigma 2 is better and improved.


What is comming in RC2 :

- Recording and DVB Subtitles, and other stuff regarding functionality :)

- You can expect RC2 before 31.12 or on New Year eve :D

Download RTi_Core_1.1.1.RC1.rar (http://www.azbox-enigma.eu/upload/RTi_Core_1.1.1.RC1.rar)

Daconi
16-01-2011, 05:22
RTi core RC2 Enigma 2


Change Log :

- New drivers from 15.01.2011

- New kernel 2.6.22-19 from 15.01.2011

- Recording ( Test phase )

- DVB Subtitles

- Fixed problem with HD Channels on 23.5 E ( We need confirmation for 1w and 30w HD channels )

- Standby fix

- Added Deinterlace settings in A/V Settings

- Added Welcome wizzard.py

- Some fixes in Multimedia part

- Several main fixes in enigma2 and .py files which improve overall Stability


DOWNLOAD:

http://hotfile.com/dl/97111195/0918292/RTi_Core_1.1.2.RC2.rar.html



Rgs,

serboon
20-01-2011, 09:06
Change Log :

- New Kernel

- New Drivers ( for DVB-S2 Tuners ) 19.01.2010

- Green screen fixed ( Multimedia Player, A/V Settings ( /etc/deinterlace was missing ) )

- Several Issues fixed

- Recording OK - Reserved Recording OK ( not tested from stand by )

- Issues on 1w, 30w, 23.5 e now should be fully fixed.

- UTF-8 Fix


In progress : Playback of recorded material .TS files directly from AzBox, and many other new things.

Please make as much as possible tests, and report them on our forum :



Download (http://hotfile.com/dl/98055127/78cda...3.RC3.rar.html)

pe.tardo
20-01-2011, 09:54
For ULTRA AND PREMIUM+ Users, please wait we are UPLOADING FIXED Enigma 2 RC3 patch.bin , as previous UPLOADED VERSION have a BUG

RTi Core 1.1.3 RC3 Fix ( Elite/Premium/Premium+/Ultra )

Hotfile (http://hotfile.com/dl/98065284/363f0d0/RTi_Core_1.1.3.RC3_Fix.rar.html)

megaupload (http://www.megaupload.com/?d=K400WYP1)

elgeneral
29-01-2011, 05:24
RTi core RC4 Enigma 2

http://img839.imageshack.us/img839/7500/screenshotqz.jpg

[LEFT]Change Log :

- New Kernel from 26.01.2011 ( Linux AZBox 2.6.22.19-19-the_ripper #216 PREEMPT Wed Jan 26 19:22:07 CET 2011 mips GNU/Linux )

- New Drivers

- Added support for .TS file Playback ( Now You are able to play recorded material directly from AzBox )

- Added support for Timeshift

- Several fixes on .py files for better stability


In progress : We will move soon to the new structure / skeleton, and we will introduce support for DVB-T, DVB-C and second DVB-S2 tuner ( just for Premium+ model ). Result of this changes will be better stability and functionality of Enigma 2 in AzBox HD Receivers.

Also, RTi team wants to express big THANK YOU to SIF Team, which also announced support for AzBox HD Devices.


Download:

RTi core 1.1.4 RC4 Enigma 2 (http://www.megaupload.com/?d=M1RIU3BS)

aguda
25-02-2011, 00:30
New ver. RC5
Changes in kernel - necessarily to write kernel (check 'copy kernel' in azup),
ofcourse it is necessary only one time [Imagen: smile.png]
What is new :
- NEW Kernel - allowed to use/install E2 on DOM and Official FW (dofferent kernel-old kernel) to USB stick
- NEW structure/file format - now E2 files/kernel use .e2 extension
NEW AZUp v.2.x.x - use only new .e2 extension
- allow to prepare and install official FW on USB stick
- allow to make Backup ch.list, settings and camd setings/scripts/cfgs from installed Enigma2 and Restore to new fresh E2 installation.
-Added additional control before install : check cpu speed and if overclocked - reset to default value
- Checking free ram (min) needed for some operation
- Checking existing/correct mount for storage device - where you want to install E2.
- Auto switch to rescue mode if AZBox is in E2 mode
- Alsoo now you can see info about loaded E2 File
pls read Readme file for more info about AZUp 2


Download

AZUp 2 (http://www.azbox-enigma.eu/upload/AZUp_v.2.0.1.rar)
Files need for install Official FW on USB (http://www.azbox-enigma.eu/upload/FW4USB.rar)
E2 RTi Core RC5 (http://www.azbox-enigma.eu/upload/RTi_Core_1.1.5.RC5.rar)


Note: This version follows the route of the New Structure of Drivers, so it is recommended that only experienced people try and avoid the famous turn booting
.

philippe146
10-03-2011, 03:53
RTi core RC6 Enigma 2
RTi core RC6 Enigma 2 Image :

Based on completly new Drivers and new Kernel.

This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device ( Download AzUP 2.1 here )

What is new :

- All drivers are rewriten and placed in Kernel space !!!

- Completly new kernel ( from 2.6.22-19 upgraded to 2.6.29 )

- New DVB-S2 Tuner driver for Elite - Premium - Premium+ and Ultra

- DVB-T and DVB-C for all models comming very soon.

- Twin tuner support for Premium+ comming very soon.

- Completly new Gstreamer build by sattomy ( Support for seeking added and Improved stability and playback )

- New and enhanced Videomode ( A/V Settings ) by telesat ( Added settings for DTS and AC3 )

- Deinterlace ( 1, 2, 3 - 1 and 2 give so far best result on our tests )

- Digital Audio settings ( Inside of A/V Settings )

- MediaCenter Plugin by sattomy

- Fixed problem for HD channels on 23.5 , 13 E, 0.8 and 30 w

- Improved Video quality

- Better STC compensation ( Switching to / from AC3 or DTS fixed )

Small Info :

- Now You are also able to play WMA files , only thing what You have to do is to rename WMA extension to WAV , as Enigma 2 doesnt recognise WMA extension ( However, we will patch soon Enigma 2 to be able to recognise .wma extension ).

Still You can expect some bugs which will be improved after implementation of DVB-T, DVB-C, ISDB-T and Twin Tuner support ( Premium+ )

We would like to ask all of You to make Feedback as much as possible

Download :

http://www.multiupload.com/PMZQPNX1QC

pe.tardo
17-03-2011, 23:56
RTi core RC7 Enigma 2

**** THIS VERSION IS JUST FOR ELITE & PREMIUM ****

RC7 core Enigma 2 Image

What is new :

- New Kernel and Drivers

- Support for DVB-T and DVB-C Tuners

- Faster zapping time

- New fixes for Media Center Plugin ( Especially on Audio part )

- Improved stability

- New Bootlogo

- Extras is accessible by Blue button

**** THIS VERSION IS JUST FOR ELITE & PREMIUM ****


.:: PREMIUM+ TWIN, DVB-C, DVB-T Support is COMMING in next few day's ::.

Download :

h**p://www.multiupload.com/3J35H68FO4

aguda
23-03-2011, 02:39
RTi core RC8 Enigma 2
RC8 - version ok for all models


This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device


- EXPERIMENTAL - TWIN SUPPORT - ofcourse only on P+
- Ultra model now work fine
- STC Prebuffering - only for test , added in A/V Settings
- Scart/RCA - Composite out fixed
- Aspect Ratio and Scalling added in A/V Settings


MultiMedia imrove and fixs :
- fixing packed avi support for gstreamer (finally solved most sync issues)
- been playing 1080p dts through mediacenter from nfs


NOTE : STC Prebuffering is only for test, pls play with this and report on forum what is your experiances , and what is best combination and compromise between fast zap and stable zap


http://www.multiupload.com/2F9FTHGP9D

raskino
25-03-2011, 05:48
RTi core Enigma 2 RC9

This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device


- Fixed recording
- Added TS playback
- Added timeshift
- Added audio AC3+ PID detection inside Enigma2 (experimental, need to be tested)


http://www.multiupload.com/KGJWNF3560

Daconi
30-03-2011, 03:02
RTi core RC10 Enigma 2

What is new in RC10 ?

- New Enigma 2 from 29.03.2011

- New Drivers from 29.03.2011

- New Bootlogo

Change log :

- Fixed subtitles

- Fixed Radio mode ( Radio channels should work now )

- Fixed sync on Media player part ( for MKV and other formats )

- Added support for subtitles in VOB files

- Improved support for AC3+ audio on DVB part
- Added Online Update option ( We will push new updates trough this plugin, follow this thread to know when to update! , Menu -> Setup -> Online Update )

- Added Beyonce 9 skin by Matrix10 ( Thank You Miro! )


Download :
Mirror #1 (http://www.multiupload.com/E3O37U6FGB)
Mirror #2 (http://www.multiupload.com/TL9IYV28RW)

Rgs, and THANKS AGAIN RTi core Team...:thum:

Daconi

Daconi
31-03-2011, 03:05
RTi core RC11 Enigma 2

What is new ?

- Fix Reboot ( working now from menu in E2 )
- Fix T/C tuner selection if no DVBS tuner on slotA
- Fix AC3 PID detection on some channels in NA
- Reactivated grab (video/osd) in driver
- New grab app
- Added modified Beyonce 9 skin modified by Matrix10 ( Skin should be faster )
- Added Fan Control ( Menu -> Setup -> Fan Control , Turn On or Off for Premium+ and Ultra )

Download:
UPLOAD IS IN PROGRESS

Rgs,

Daconi

Daconi
31-03-2011, 04:22
Here is download for: RTi core RC11 Enigma2

Download:
RTI core RC11 Enigma2 (http://www.multiupload.com/LRJCKMQTSF)
Mirror #1 (http://www.multiupload.com/NUQJ21TUJ7)

Rgs,

Daconi

pe.tardo
06-04-2011, 00:09
RTi core RC12 Enigma 2
What is new ?

New kernel - enable EXT4 - but necessarily to use latest ver. of AZUp
Reboot - Solved
Rescue mode via AZUp and Setup Menu - Solved
Standby mode - Solved
Changes in AV settings - AV Prebuffering (now step is 50ms)
Repeated 2 x times Online Update in Extension menu and missing in plugin menu - Solved
Improvement in CAMD Manager
OverClock menu is removed now
Problem with RGB Scart and encrypted ch. - Solved
Changes in FSTAB file - usb drive now automounted on /media/hdd or/and /media/usb



**NOTE: Do not forget to use latest ver. of AZUp 2.0.4 - full setup is included in archive! **



Download:


RTi core RC12 Enigma 2 Image (http://www.multiupload.com/SXDC5FF4WI)

aguda
30-05-2011, 01:09
RTi Core v1.0

What is new ?


- Card Reader OK

- New MediaCenter OK ( Menu -> Media Center, choose My Videos and wait 10-15 seconds to re-initialize HDMI!!!, for subtitles *.SRT press red button or SUB-T on RCU, they need to be named same as movie )

- Audio BUG Fixed

- A lot of other bugs fixed and so on.

- Time for zap - reduced

- VOL +/- Fixed

- MUTE(when change ch.) - Fixed

- Lost data when power off/on - Fixed

- Problem with relaod ch.list - Fixed

- Problem with external messages - Fixed

- New/rewritten WebIf

- NEW driver for RemoteControl - work like a charm

- New way for go to rescue mode - press and hold VOL+ button (from front panel or RemoteControl) during AZBox booting

- Removed DOM to be listed as HDD in Enigma2 Info, and now DOM is excluded from standby so COGs will show less.


In Media Center we know that Seeking is not working and VOL UP and DOWN, so please do not report this as BUG, it will be fixed in next release!


http://www.filesonic.com/file/1088930224/RTi_Core_1.0.rar

Doctor Who
30-05-2011, 01:38
Link Megaupload
http://www.megaupload.com/?d=HC1AREHO

hilton
13-06-2011, 16:39
RTi Core v1.0 FIX


Losing data after reboot

Mising : Restart GUI in shoutdown menu - need for remember selected subtitle, audio language, voluem position, last ch. - as startup channel

Default video mode in videowizard - now is 720p, and removed 480i and 576i (but exist in main menu and video mode setup)

Time on VFD in standby mode now is ok

Fixed bug in : "Positioner Setup" menu - if pres left/right buttons appears green screan

Fix bug in CAMD Manager - if camd list is empty and press ok/green button appears green screan

Media Center Fixes:

Add to watch in autofs, now is easy - connect usb device and it will be visible in Media Center

Add dvd playback, wmv playback,

python fixes...


DOWNLOAD (http://www.filesonic.it/file/1206860054/RTi_Core_1.0_-_Fix.rar)

Usare azup 2.1.0 che troverete nel pack interno

baha2
16-07-2011, 13:55
RTi Core v1.1 Enigma 2

What is changed:

- back to linux 2.6.22

- Overall stability is better

- Faster zapping

- Media Center should support many files and formats

- new filter handling code, should be fixed D+ channels

- default EPG okey

- recording okey , when playing recorded material over VLC no breaks in sound

- 1080p font should be okey

- faster video mode changes

- grab fix for HD ch.

- P+ 2'nd tuner fix and decription

- usbserial and ftdi.ko (USB Card readers and other usb hw should work)

- New Bootlogo - thanx to Daconi

and many more fixes/features

What (still) doesnt work:
- MyTube - only first video work without problem
- TS (recorded from e2) doesnt play in MC , but play in internal E2 TS player (press guide button)
- Some TS (recorded frome2) doesnt play in internal TS player
- DVD player in MC doesnt work and when start and want to exit - get only spinner and receiver doesnt responding / crash

RTi E2 project is really maded for all users which really wants something more from their lovely AzBox.

RTi E2 is mentioned mean people, which are full of frustrations or which are paid to spread lies and bad words about AzBox or to act like that, or people which really dont have an elementary knowledge about Linux systems which doesnt know anything more than Format App area, we really recommend them to buy some FTA Receiver and to stop torturing themselves with modern technologies, and to cure their frustration with help of professional psychiatrists, as also psychiatrists need to live and earn from something .

Unfortunately, there is one small group which is working against AzBox and anything related to it, especially after new models was announced on Anga Cable Show in Germany. Please be aware that this group will make their activities against AzBox even stronger when new models soon come to the market, and because of this we want to let You know, all normal users about their intentions and to stay cool and to dont react on their provocations.

For us, there is only one mission, just to make YOU, all normal users happy with their lovely AzBox, and to listen Your wishes to make our enigma 2 better as much is possible, and in same time to ignore bad and mean voices.

For Flashing Your AzBox with this latest Enigma 2, to avoid any problems in that process, please be carefull and use latest AzUP which is attached with RTi Enigma 2 v1.1, as we cant guarantee how Your AzBox will work if You flash it with other tools which are not maded in cooperation with our team.

We also want to say Thanks to all our Beta testers which tested in BETA Section almost 2 weeks this new Enigma 2, and which helped us to fix as much as possible things inside of it.

Also we want to let you know, that RTi Team is in every day connection and talks with SPAZE Team, and we make big and good cooperation with them, so You can also expect new SPAZE Images for AzBox with latest updates and so on.

RTi Team also decided to open some parts of drivers, like Tuner drivers, kernel and so on, so people can do as much as possible modifications .

Download RTi Core v1.1. Enigma 2:

RTi Core v1.1 (http://www.filesonic.com/file/1454301624/RTi_Core_1.1.rar)

Doctor Who
16-07-2011, 15:44
Link Megaupload:

http://www.megaupload.com/?d=NR96RG80

baha2
18-07-2011, 23:45
Updates for RTi E2 v.1.1

Update: FIRMWARE image for tuner for Elite & Premium (CX24116 tuner)

For user who have problem with channels with WLan (Premiuma & Premium+)

pe.tardo
12-08-2011, 18:00
RTi Core v1.2 Enigma 2


What is new?

- Kernel (Linux AZBox 2.6.22.19-25-the-ripper #48 PREEMPT Thu Jul 21 01:35:08 CEST 2011 mips GNU/Linux)

- Drivers from 05.08.2011 (Overall performance and stability is better now)

- Standby fixed on Premium

- New Media Center (Subtitle improvements, better support, just WMA and WMA Pro is not working)

- Added DVD Player (DVD ISO Files are now playable)

- Fixed MyTube

Media Center tested with:

- Batman Begins 1080p HDDVD x264-ESiR.mkv

- hd1080-defiance.mkv

- Transformers.Revenge.of.the.Fallen.1080p.BluRay.x2 64-ETHOS.mkv

- Blood.Diamond.2006.1080p.HDDVD.x264-DEFiNiTE.mkv

- The_Matrix_1999_1280x532_DTS_5.1channels.mkv


To Load this Enigma2 use AZUp attached together with Enigma 2.


Download:

http://www.filesonic...Ti_Core_1.2.rar (http://www.filesonic.com/file/1654963634/RTi_Core_1.2.rar)

aguda
18-08-2011, 00:15
We maded new RTi Core Enigma 2 Image v1.2.1


Image includes some experimental fixes:
-Wlan fixed (tested on premium)
-Ultra fixed
-DVI fixed (at leat at my dvi monitor it works now)
-New keymap added
-New audio decoding approach (please test AAC)

THIS IMAGE DOES NOT INCLUDE MEDIACENTER
-As MC needs some adaptions this will be released as ipk in the coming days.

You can download it from:

http://fileml.com/2lrb1

raskino
23-08-2011, 21:48
Update blu-panel


Update 12/8/2011

- Kernel (Linux AZBox 2.6.22.19-25-the-ripper #48 PREEMPT Thu Jul 21 01:35:08 CEST 2011 mips GNU/Linux)
- Drivers from 05.08.2011 (Overall performance and stability is better now)
- Standby fixed on Premium
- New Media Center (Subtitle improvements, better support, just WMA and WMA Pro is not working)
- Added DVD Player (DVD ISO Files are now playable)
- Fixed MyTube

Update 20/08/2011

-Apsect ratio fix
-Deep standby changed to shutdown because no difference between standby and deepstandby
-Videmode plugin changed for aspect ratio. Use scalingmode letterbox for auto scaling of 4:3 etc
-Added playback of recordings through MediaCenter from Internal recordings list (expirimental)
-Fixed cifs mounting in mount manager
-Added azbox grab again(hopefully working)

MediaCenter update:
-Use blue button -> RTI installer to install MediaCenter
-Added recordings playback (Please provide small samples if you have none working files. Samples must include the .ts and .**** files)
-Added autofs for all options
-Added aspect ratio (you can change while playing a movie. Active scalingmode not yet detected)

Update 21/08/2011

-Screengrab fixed
-Mytube from 1.2 (should be working now)
-Bootup file fix for /var/keys
-Entering MC fixed
-Raw/Spdif fixed

Update 23-08-2011

Fixes:
-New driver
-Fixed second tuner decoding
-Added recording one channel, watching second channel on the same transponder with one channel. (Limit is 2 channels per tuner)

MC:
-Added scalingmode option in AV settings
-Return to tv scaling mode on exit
-Fixed Audio player play all and playlist stuff
-Fixed stripped header mkv (at least on the files i had to test)

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum