Software For All ''DONGLES

B

baloota

Registered
Messages
2,055
23.11.2010

new software timer

Works on all Aldnagel Valid and ending Permission


Working on the satellite Atlantic Bird

also big thanks to jordan love from jo1sat

:thum:
 
B

baloota

Registered
Messages
2,055
27.11.2010

other Firmware fix serial numbers for microbox 1


for Dnagel ending validity

thanks to jo1sat

:thum:
 
S

satalgerien

Registered
Messages
155
1. Use the Microbox CLEANER
2. Upload the new Software using "Do-UPV1.0.1"
3. Restart the Microbox by unplugging and plugging the power
4. Press "Audio"-Button and confirm with "Yes"
5. Configure the Settings (Protocol - Sat configuration)
6. Restart the Microbox by unplugging and plugging the power
7. Have fun!!!

Download

DoUp-V1.58a 22-11-2010.rar
 
mohammed tanko

mohammed tanko

Super VIP
Messages
4,862
28.11.2010

Below are a detailed steps, about how to update the MicroBox dongle.
​

Step 1:
- Connect the MicroBox dongle to the power, and make sure its turned on ( Red light inside it ), after that connect the serial port from the MicroBox to the serial port, in your PC.

Step 2:
- Download the cleaner software for the downloads section, then open the .rar file and you should be able to see the below files, open the cleaner.exe file.


Step 3:
- After you have the program opened click START button, then you should see that a
"Waiting Boot..." is showing up near the software title, as the below image shows.


Step 4:
- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the cleaning process is started, as the below image shows.


Step 5:
- Once the cleaning process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again.

Step 6:
- Now download the software that you want to install from the site, then open the .rar file as below.


Step 7:
- Open the .exe file, which is the software it self.

Step 8:
- After you have the program opened click START button, then you should see that a "Waiting Boot..." is showing up near the software title, as the below image shows.


Step 9:
- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the transferring process is started, as the below image shows.


Step 10:
- Once the transfering process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again, and by this you have the software installed at your MicroBox Dongle.

Hope this was useful for you.

mohammed tanko


 
B

baloota

Registered
Messages
2,055
28.11.2010

First Download the file Jo1Sat Cleaner All to clean the dongle and then load the software


Experience has dongel with numbers ending


Note soft works on dongel with numbers ending dongel and change the number and the validity of a new Portable


also work on dongel ALPHA

test by me
:thum:
 
mohammed tanko

mohammed tanko

Super VIP
Messages
4,862
HD BOX_[V2.17] _W3A_2010_11_30
Code: 
[V2.14]
 - Strong BOX working - fixed it.
 - W3A_2 satellite added.

[V2.15]
 - W3A_1 and W3A_2 was merged to W3A.
 
[V2.16]
 - When we change satellite to another one by OSD, 
   It was died. - fixed it.

[COLOR=Red][V2.17]
 - Both 4Mhz & 13.5Mhz can be worked.
 - The number of channels can be Max 800.[/COLOR]
 
You must log in or register to reply here.
Top