DM500 HD with flash DreamUp

http://img651.imageshack.us/img651/5536/startkb.jpg

Unplug the Dreambox is the first network
Start the program "DreamUp"

http://img534.imageshack.us/img534/714/connecte.jpg

Please select the Com port to which your Dreambox is connected
Selection: network / network without
if network: enter local IP of the PC, enter third-IP for the box

http://img532.imageshack.us/img532/7627/uploadingt.jpg

the "Connect" button, click
and then the power cord then plug the box
Please wait while now

after the flash loader is transferred to the box, select the
Button box flashing "from the operating software

http://img511.imageshack.us/img511/9767/fileq.jpg

Select the firmware and click "open"

http://img242.imageshack.us/img242/1103/ftpup.jpg

The upload is started, please wait

http://img213.imageshack.us/img213/1682/flashingy.jpg

Box copies the new operating software into the flash memory, please wait

http://img411.imageshack.us/img411/4917/finishb.jpg

"The box was flashed successfully," click on "OK"
Click on "Disconnect / then Exit
Box restart...



DreamUP V1.3.3.5 (http://www.sat-universe.com/showthread.php?p=553894#post553894)