C3LN VDR 0.1 for Ipbox 9000HD

C3LN - VDR-1.7.4 for CubeRevo

release 0.1: Cause the fourth is too much
===========
This is the first beta release of VDR for the cuberevo.

VERY IMPORTANT : SETUP YOUR DISPLAY RESOLUTION AND DISEQC!!! SEE BELOW...
VERY IMPORTANT 2: THIS RELEASE NEEDS A DHCP SERVER IN YOUR NETWORK IN ORDER TO SETUP DISPLAY RES AND DISEQC
VERY IMPORTANT 3: WHEN USING CHANNELSCAN, SWITCH TO CLASSIC OR STTNG PANELS SKIN BEFORE SCANNING AND SWITCH
BACK TO AVANTGARDE REELSKIN AFTER FINISHING THE SCAN, THAT WAY YOU WILL HAVE A PROGRESS BAR

If you want to post bug reports, at least do the following and provide the following info:
- reproduce the error, unreproducable errors for this release are not accepted
- write down the steps to get to the bug from a fresh reboot
- write down which channel, sattelite, transponder etc.
- is the channel fta or scrambled
- how do you get the keys (cccam client, newcs etc)
- preferably try to reproduce it on astra 19.2

Setting up diseqc needs to be done in /var/vdr/etc/diseqc.conf

Features
========
- both tuners working, for recording and live
- shoutcast radio
- dgs picture quality
- channelscan function
- trickmode on SD.
- support for dvb-s2 (both cx and st tuners)
- support for dvb-c (might be slow on a scan)
- support for dvb-t (might be slow on a scan)
- built-in cccam/newcamd/gbox etc client
- built-in support for softcam.key
- for cam config see /var/vdr/etc/plugins/sc all vdr-sc options are available
- 3 different skins, classic, ttng and reelbox skin included
- newcs and oscam (as cardserver to vdr-sc) are included, but not configured.
- ssh and telnet started by default
- Pacco's carddriver.

Limitations
===========
- support for CubeRevo/IPBox9000 only (I don't have any of the other boxes)
- no dvb-s tuner support.
- no timeshift
- trickmode on HD can be buggy, best not use it now
- subtitles do NOT work
- no PIP
- limited usage of front vfd (only shows stationname).
- no setup for revo specific hardware (needs to be done through files)
- no audio channel switching is possible for now.
- no teletext, can be enabled, but misses a lot of pages and eats up a lot of cpu cycles
- no support for hardware cam's.
- standby is not supported
- timer recordings are untested, please post your results
- rotor isn't supported unless it can be done through diseqc.conf, also untested (no rotor here).
- probably lots more

Configuration
=============
username: root
password: relook

initially setup with dhcp, to change this edit /var/interfaces

Setup of screen resolution:
Manually while running: echo x > /sys/class/revo/display_res
where x is one of:
1: Pal (576i 50Hz)
2: NTSC (480i 60Hz)(untested)
3: 720p 50Hz
4: 720p 60Hz (untested)
5: 480p 60Hz (untested)
6: 1080i 50Hz
7: 1080i 60Hz (untested)
To make the setting to be set at reboot: edit /var/default/api5

To enable teletext:
Edit /var/default/vdr and add -P osdteletext to VDROPTS.

in /var/etc/init.d/user you can run any application (like newcs) prior to starting vdr.

This image does NOT format your harddisk (just to make sure everyone knows).

Click to expand...

USB Stick Version:

For u-boot settings: This version needs to be booted as if it is a dgs usbstick image, the enigma2 usb-stick bootsettings are not suitable for booting this usb stick version.

Click to expand...