Cccam in Arion - Ferguson AFxx

13.06.2009


new Cccam in arion ferguson AFxx withe programme PlugDVB127.exe and DVBxtreme soft

-Select gboxsssp and And follow the mhetode in Photo

-open CCcam in arion ferguson_AFxx programme and in plugines Find file flycccam Type your c line of cccam

http://img512.imageshack.us/img512/6782/51165887.jpg

# look the line c

http://img67.imageshack.us/img67/3629/53739486.jpg

# click in PlugDVB127.exe

http://img524.imageshack.us/img524/5246/84275886.jpg

# configration com

http://img382.imageshack.us/img382/7184/19147468.jpg

# cccam ok now

http://img219.imageshack.us/img219/8786/37428124.jpg

thanks @ borsalino

http://img382.imageshack.us/img382/7184/19147468.jpg



One very important point.
Baut Rate - set to 115200
Only in this setting, started :thum:

new tools CCCAM, tested on Ferguson AF with firmware DvbXtreme AF7_RC7 and A03
- A very good test:clapping::thum:

How it Works?

1.Install First Fausto Last Version

2.Install CardSharing-X Yuma1.0 for Fausto on Bottom is File for Download.

3.Connect your box with rs 232 cable.


Now CardSharing-X Yuma1.0
Connect Fausto and box supporting serial Truman Share (Yumatu,Opticum...) In 3 steps .

STEP 1 - Add CCCam C: Server Line

STEP 2 - Select Com Port

STEP 3 - Press Connect

Operates at Ferguson AFxx18, the test 100% :thum: :thum: :thum:

http://img440.imageshack.us/img440/4619/snap1.gif

http://img180.imageshack.us/img180/1361/34690376.gif

http://img692.imageshack.us/img692/2663/13832245.gif

http://img242.imageshack.us/img242/4906/22109809.gif


In the configuration of the tuner set sharing (Gbox SSSP), we mark all the coding systems, as in other settings sharing NewCamd

Tools Sharing

http://www.sat-universe.com/attachment.php?attachmentid=200760&d=1268421558

Which verssion of Fausto i should use ?
I trayed 1,36 and 1,37 and all verssion dont work with Yuma ( i cant change option to SSP )
On my ferguson i have AF7_RC6

Thx for help

I have tested with version v 1.42 and 1.43 :)

1.42 ****> http://www.sat-universe.com/attachment.php?attachmentid=189822&d=1264028459

thx for replay
but it dont work at my ferguson :-(
Could you share with me your softwore pack ?
My c-line connect to the server with caid 0100 0b00 and 1803
Did you sucessful setup 1803 (polsat) on ferguson using gbox-ssp?

thx for your answer

thx for replay
but it dont work at my ferguson :-(
Could you share with me your softwore pack ?
My c-line connect to the server with caid 0100 0b00 and 1803
Did you sucessful setup 1803 (polsat) on ferguson using gbox-ssp?

thx for your answer

Tested on firmware DVbXtreme AF7_RC7
in my C + and Polsat working.
It is important that line C was a maximum of HOP2

Fausto 1.43_ Emu keys

- using Fausto1.43 we can use the keys EMU and the promotion of the CCW
not wgrywając them to a receiver, and using just keys and Fausto Diablo.bin *

- this is a way, sharing key EMU
- But you can treat it as test :D :

- that is, in Fausto and tuner set everything as described above.

- Fausto open****> Accessories**** emulator

http://img30.imageshack.us/img30/7511/snap2g.gif

- In the open window (key files) to open the new keys Diablo.bin
- And it all ......... we see what is in the promotion :thum:

where is fustu 1.43 download link

let me please tell which sofware for arion receiver is good to use sharing?

where is fustu 1.43 download link

let me please tell which sofware for arion receiver is good to use sharing?

Firmware serie DVBXtreme AF7_RC7 and A03

On Fausto v 1.42 biss key is not working properly,
Fausto attepts and pic the key up correct but receiver does not show channel.
As an example PTV K FEED Asiasat (3S 105.5E) bis running key is 000000000007868D sid 0003 caid 2600 but fausto shows only pmt information and does not show ecm, why?

what do i need to make it work on Arion AF-8000HDCI?

pls list the programs and i have emu soft on my reicever.

what do i need to make it work on Arion AF-8000HDCI?

pls list the programs and i have emu soft on my reicever.


You must be uploaded to emu soft, with support for protocol cccam (SSSp)

gladiator_sssp_cccam_newcs_V1.06

used to program the tuner HF sharing 8800/8900HD
Very well with the series AFxx18 tuners.
In particular, very well run cccam tests I noticed far better performance
than is the case, for example using SSSpv.1.2 and flycccam.
Switching takes place as smoothly.
I'll add that I tested on the test of HOP3 if cards are closer to work should be
definitely better.

http://img822.imageshack.us/img822/4619/snap1.gif

[B]Settings

- The first thing you should do is edit the configuration file with the data servers that we want to test
- For example, edited line C: ::

http://img843.imageshack.us/img843/9131/snap3.gif

- edit lines, time to set the tuner:

- If test NewCS, set::

Sharing MODE: Newcamd
CA System: ALL CA_ID
TRY EMU: NO
TIMEOUT DELAY: 9999

- if test cccam:

Sharing MODE: Gbox (SSSp),
CA System: ALL CA_ID
TRY EMU: NO
TIMEOUT DELAY: 9999

- now remains for us to fire up the program:

http://img828.imageshack.us/img828/1571/snap4.gif

- when the test is active in the window server lit green.
- Entering into the tab and selecting np.1 NET Server, we have a preview, among other things
which makes use of the card.

Have fun :thum:

hello have problem soft gladiator not open seca?
because it will
would appreciate help:mecry:

this is a problem with Gladiator Seca, I do not know how to change it :cool:

gladiator_sssp_cccam_newcs_V1.07

- Polish ver.
- Persian ver.

http://img338.imageshack.us/img338/5875/snap2.gif

http://img833.imageshack.us/img833/3172/60717172.jpg

have probleme
version1.07 PL always block and the other by pressing the star enable error:(