Target not connect or target is error status!

jinxjack
09-03-2009, 12:49
HI! I am new to the site. I need help with my Echolink-808 fta. I cannot update it. i am using aliminiupg5 and i keep getting this problem.

Please power on your STB.
Open Serial Port..
Sync to serial port..
Target not connect or target is error status!

What should i do? I am using null cable db9f. cable is new.
PLZ HELP!

kassona55
09-03-2009, 13:16
click conect
then
power on your STB
thx

jinxjack
09-03-2009, 17:07
i do exactly.
The receiver doesn't have a on, off switch on back.
so i plug the power cable out and then in.

jinxjack
11-03-2009, 18:25
people come on!

The Beast
11-03-2009, 20:56
try the original serial cable RS232

jinxjack
13-03-2009, 12:29
which one is that?

wonderfulman
13-03-2009, 12:45
cable null modem RS232 or try to change your COM Port,Com1,2,3
.... etc

jinxjack
14-03-2009, 10:20
i have only one com port. port1.
it is the original one.

FIDOFOREVER
17-03-2009, 09:52
I think the problem is in the Serial cable try to replace it

aqrsboy
17-03-2009, 14:26
the only way to solve this is flash ur stb

alfred_1
17-03-2009, 15:37
i have only one com port. port1.
it is the original one.

Choose the Com Port 1 or 2 of the Computor

dawar
17-03-2009, 16:29
Same problem here.Even changed the cable,shows the following massage.
Please power on your STB.
Open Serial Port..
Can not connect serial port!

krisbanagan
17-03-2009, 16:54
i think your cable is deffective or open oneside,chk it..

jinxjack
17-03-2009, 18:51
found the problem. it had a secret code. it updated automatically by it self.

Reformist1
18-03-2009, 09:13
please clarify the secret code. there are many with this problem. Iam one of them. Please clarify the method.

jinxjack
21-03-2009, 12:08
it is 7776. on the main menu from there u would know what to do.

m.saeed
10-12-2010, 23:08
sir

I am facing problem with my receiver "STAR SAT SR-X6300CU SUPER".
When I downloaded the software "Ali3329C" it started giving following problems:
1. Showing Boot after turning power on and hanged up.
2. Unable to connect my PC.(TARGET NOT CONNECT OR TARGET IS ERROR STATUS) :please
I need your support for the help.

Thanx,

toyota58
24-02-2012, 20:13
porfabor me pueden ayudar ,en el deco 4800hd engel me sale las letras ASH. y no hace nada gracias

Diroojay
24-02-2012, 22:54
sir

I am facing problem with my receiver "STAR SAT SR-X6300CU SUPER".
When I downloaded the software "Ali3329C" it started giving following problems:
1. Showing Boot after turning power on and hanged up.
2. Unable to connect my PC.(TARGET NOT CONNECT OR TARGET IS ERROR STATUS) :please
I need your support for the help.

Thanx,

Make sure that you are on the right port.

legsy
25-02-2012, 00:03
I got this message i checked and the cable looked fine then I checked again and it was slightly out on the pc Port.

its worth totally removing the cable from both ports then reconnecting.

sameer91
25-02-2012, 05:35
:mecry: plz hlp all axpert

mosse_t
29-10-2012, 11:38
sir

I am facing problem with my receiver "STAR SAT SR-X6300CU SUPER".
When I downloaded the software "Ali3329C" it started giving following problems:
1. Showing Boot after turning power on and hanged up.
2. Unable to connect my PC.(TARGET NOT CONNECT OR TARGET IS ERROR STATUS) :please
I need your support for the help.

Thanx,
Hi all
Same problem for me
i have the same device and is showing Boot after turning power on for about 5 seconds and then showing "ON" and hanged up
unable to connect to pc anymore
PLS HELP

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum